Re: [PATCH v2 6/6] phy: qcom-qmp-ufs: Add SM8550 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 12, 2023 at 03:05:42PM +0200, Abel Vesa wrote:
> Add SM8550 specific register layout and table configs.
> 
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 100 ++++++++++++++++++++++++
>  1 file changed, 100 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> index 5936a3a05002..a9b666f32f59 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> @@ -95,6 +95,13 @@ static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
>  	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL,
>  };
>  
 
> +static const char * const sm8550_ufs_phy_clk_l[] = {
> +	"qref", "ref",
> +};

These clocks would to be added to the binding too, but based on:

	https://lore.kernel.org/r/20230112135926.1572191-1-abel.vesa@xxxxxxxxxx

you really don't need these at all and what you call 'qref'
(GCC_UFS_PHY_PHY_AUX_CLK) is just 'ref_aux' below.

> +
>  static const char * const sdm845_ufs_phy_clk_l[] = {
>  	"ref", "ref_aux",
>  };

> @@ -721,6 +787,15 @@ static const struct qmp_ufs_offsets qmp_ufs_offsets_v5 = {
>  	.rx2		= 0xa00,
>  };
>  
> +static const struct qmp_ufs_offsets qmp_ufs_offsets_v6 = {
> +	.serdes		= 0,
> +	.pcs		= 0x400,

Zero pad .pcs to 4 digits?

> +	.tx		= 0x1000,
> +	.rx		= 0x1200,
> +	.tx2		= 0x1800,
> +	.rx2		= 0x1a00,
> +};

Johan



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux