Use STM32 ADC generic bindings instead of legacy bindings on
DHCOR DRC Compact board.
The STM32 ADC specific binding to declare channels has been deprecated,
hence adopt the generic IIO channels bindings, instead.
The STM32MP151 device tree now exposes internal channels using the
generic binding. This makes the change mandatory here to avoid a mixed
use of legacy and generic binding, which is not supported by the driver.
Signed-off-by: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
---
.../dts/stm32mp15xx-dhcor-drc-compact.dtsi | 28 ++++++++++++++++---
1 file changed, 24 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
index c32c160f97f2..12c85926b901 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
@@ -57,15 +57,35 @@ &adc { /* X11 ADC inputs */
status = "okay";
adc1: adc@0 {
- st,adc-channels = <0 1 6>;
- st,min-sample-time-nsecs = <5000>;
status = "okay";
+ channel@0 {
+ reg = <0>;
+ st,min-sample-time-ns = <5000>;
+ };
+ channel@1 {
+ reg = <1>;
+ st,min-sample-time-ns = <5000>;
+ };
+ channel@6 {
+ reg = <6>;
+ st,min-sample-time-ns = <5000>;
+ };
};
adc2: adc@100 {
- st,adc-channels = <0 1 2>;
- st,min-sample-time-nsecs = <5000>;
status = "okay";
+ channel@0 {
+ reg = <0>;
+ st,min-sample-time-ns = <5000>;
+ };
+ channel@1 {
+ reg = <1>;
+ st,min-sample-time-ns = <5000>;
+ };
+ channel@2 {
+ reg = <2>;
+ st,min-sample-time-ns = <5000>;
+ };
};
};
--
2.25.1
