On 11.01.2023 20:20, Dmitry Baryshkov wrote:
> Switch both power and performance clocks to the GPLL0/2 (sys_apcs_aux)
> before PLL configuration. Switch them to the ACD afterwards.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
> drivers/clk/qcom/clk-cpu-8996.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
> index 571ed52b3026..47c58bb5f21a 100644
> --- a/drivers/clk/qcom/clk-cpu-8996.c
> +++ b/drivers/clk/qcom/clk-cpu-8996.c
> @@ -432,13 +432,27 @@ static int qcom_cpu_clk_msm8996_register_clks(struct device *dev,
> {
> int i, ret;
>
> + /* Select GPLL0 for 300MHz for the both clusters */
superfluous 'the'
> + regmap_write(regmap, PERFCL_REG_OFFSET + MUX_OFFSET, 0xc);
> + regmap_write(regmap, PWRCL_REG_OFFSET + MUX_OFFSET, 0xc);
> +
> + /* Ensure write goes through before PLLs are reconfigured */
> + udelay(5);
Is this value based on n clock cycles, or 'good enough'?
> +
> clk_alpha_pll_configure(&pwrcl_pll, regmap, &hfpll_config);
> clk_alpha_pll_configure(&perfcl_pll, regmap, &hfpll_config);
> clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config);
> clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
>
> + /* Wait for PLL(s) to lock */
> + udelay(50);
Weird indentation
Maybe wait_for_pll_enable_lock() to be super sure?
> +
> qcom_cpu_clk_msm8996_acd_init(regmap);
>
> + /* Switch clusters to use the ACD leg */
> + regmap_write(regmap, PWRCL_REG_OFFSET + MUX_OFFSET, 0x2);
> + regmap_write(regmap, PERFCL_REG_OFFSET + MUX_OFFSET, 0x2);
> +
No delays here?
Konrad
> for (i = 0; i < ARRAY_SIZE(cpu_msm8996_hw_clks); i++) {
> ret = devm_clk_hw_register(dev, cpu_msm8996_hw_clks[i]);
> if (ret)
