[PATCH 08/13] clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call

[Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>]

Initialize ACD configuration from qcom_cpu_clk_msm8996_register_clks(),
before registering all clocks. This way we can be sure that the clock is
fully configured before letting CCF touch it.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/clk/qcom/clk-cpu-8996.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
index e390f4aadff1..571ed52b3026 100644
--- a/drivers/clk/qcom/clk-cpu-8996.c
+++ b/drivers/clk/qcom/clk-cpu-8996.c
@@ -425,6 +425,8 @@ static struct clk_regmap *cpu_msm8996_clks[] = {
 	&perfcl_pmux.clkr,
 };
 
+static void qcom_cpu_clk_msm8996_acd_init(struct regmap *regmap);
+
 static int qcom_cpu_clk_msm8996_register_clks(struct device *dev,
 					      struct regmap *regmap)
 {
@@ -435,6 +437,8 @@ static int qcom_cpu_clk_msm8996_register_clks(struct device *dev,
 	clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config);
 	clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
 
+	qcom_cpu_clk_msm8996_acd_init(regmap);
+
 	for (i = 0; i < ARRAY_SIZE(cpu_msm8996_hw_clks); i++) {
 		ret = devm_clk_hw_register(dev, cpu_msm8996_hw_clks[i]);
 		if (ret)
@@ -467,9 +471,8 @@ static int qcom_cpu_clk_msm8996_register_clks(struct device *dev,
 #define L2ACDSSCR_REG 0x589ULL
 
 static DEFINE_SPINLOCK(qcom_clk_acd_lock);
-static void __iomem *base;
 
-static void qcom_cpu_clk_msm8996_acd_init(void __iomem *base)
+static void qcom_cpu_clk_msm8996_acd_init(struct regmap *regmap)
 {
 	u64 hwid;
 	u32 val;
@@ -488,13 +491,13 @@ static void qcom_cpu_clk_msm8996_acd_init(void __iomem *base)
 	kryo_l2_set_indirect_reg(L2ACDSSCR_REG, 0x00000601);
 
 	if (PWRCL_CPU_REG_MASK == (hwid | PWRCL_CPU_REG_MASK)) {
-		writel(0xf, base + PWRCL_REG_OFFSET + SSSCTL_OFFSET);
+		regmap_write(regmap, PWRCL_REG_OFFSET + SSSCTL_OFFSET, 0xf);
 		kryo_l2_set_indirect_reg(L2ACDCR_REG, 0x002c5ffd);
 	}
 
 	if (PERFCL_CPU_REG_MASK == (hwid | PERFCL_CPU_REG_MASK)) {
 		kryo_l2_set_indirect_reg(L2ACDCR_REG, 0x002c5ffd);
-		writel(0xf, base + PERFCL_REG_OFFSET + SSSCTL_OFFSET);
+		regmap_write(regmap, PERFCL_REG_OFFSET + SSSCTL_OFFSET, 0xf);
 	}
 
 out:
@@ -509,7 +512,7 @@ static int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
 
 	switch (event) {
 	case PRE_RATE_CHANGE:
-		qcom_cpu_clk_msm8996_acd_init(base);
+		qcom_cpu_clk_msm8996_acd_init(cpuclk->clkr.regmap);
 
 		/*
 		 * Avoid overvolting. clk_core_set_rate_nolock() walks from top
@@ -538,6 +541,7 @@ static int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event,
 
 static int qcom_cpu_clk_msm8996_driver_probe(struct platform_device *pdev)
 {
+	static void __iomem *base;
 	struct regmap *regmap;
 	struct clk_hw_onecell_data *data;
 	struct device *dev = &pdev->dev;
@@ -559,8 +563,6 @@ static int qcom_cpu_clk_msm8996_driver_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	qcom_cpu_clk_msm8996_acd_init(base);
-
 	data->hws[0] = &pwrcl_pmux.clkr.hw;
 	data->hws[1] = &perfcl_pmux.clkr.hw;
 	data->num = 2;
-- 
2.30.2