Re: [PATCH V2 6/7] MIPS: Loongson64: DTS: Add RTC support to Loongson-2K

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




在2023年1月9日一月 上午1:36,Binbin Zhou写道:
> The Loongson-2K RTC module is now supported, enable it.
>
> The MMIO address is unclear from the Loongson 2K1000 user manual, I took
> it from Loongson's out-of-tree fork of Linux 4.19.

Can confirm this MMIO address is correct. It matches current confbus BAR
setting by PMON.

>
> Signed-off-by: WANG Xuerui <git@xxxxxxxxxx>
> Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>

Acked-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>


> ---
>  arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi 
> b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> index 8143a61111e3..c22414595140 100644
> --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
> @@ -57,6 +57,13 @@ pm: reset-controller@1fe07000 {
>  			reg = <0 0x1fe07000 0 0x422>;
>  		};
> 
> +		rtc0: rtc@1fe07800 {
> +			compatible = "loongson,ls2x-rtc";
> +			reg = <0 0x1fe07800 0 0x78>;
> +			interrupt-parent = <&liointc0>;
> +			interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
> +		};
> +
>  		liointc0: interrupt-controller@1fe11400 {
>  			compatible = "loongson,liointc-2.0";
>  			reg = <0 0x1fe11400 0 0x40>,
> -- 
> 2.31.1

-- 
- Jiaxun




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux