From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
Add support for lsio_pwm0-3, add io-channel-cells property for ADC
nodes, set lpspi0 max frequency to 60MHz, add toradex,apalis-imx8 et al.
to dt-bindings and finally, add initial support for Apalis iMX8 split
into module and carrier board parts.
Changes in v3:
- Fix subject as pointed out by Shawn. Thanks!
- Properly accommodate for -v1.1 modules curtsey Francesco.
- Only use V1.1 compatible for V1.1 module dtsi.
- Split patch into separate module and carrier boards parts as suggested
by Shawn.
- Put reg after compatible as requested by Shawn.
- Move atmel_mxt_ts and rtc_i2c into module dtsi to save such
duplications as suggested by Shawn.
- Change iomuxc pinctrl indent style as suggested by Shawn.
- Change led node names to the preferred first form as suggested by
Shawn. While at it also add color (yikes), default-state and function
properties and remove the deprecated label property.
- Put enable-active-high properties after the gpio ones as suggested by
Shawn. Thanks!
- Remove adc node's vref-supply and accompanying reg_vref_1v8 regulator
node.
- Rename gpio-hogs adherring to dt schema naming convention.
Changes in v2:
- Fixed missing space in the comment V1.1Module curtsey Max.
- Added Rob's ack.
Marcel Ziswiler (3):
dt-bindings: arm: fsl: add toradex,apalis-imx8 et al.
arm64: dts: freescale: add initial apalis imx8 aka quadmax module
support
arm64: dts: freescale: add initial apalis imx8 aka quadmax carrier
board support
Max Krummenacher (1):
arm64: dts: imx8-ss-dma: add io-channel-cells to adc nodes
Philippe Schenker (2):
arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3
arm64: dts: freescale: imx8-ss-dma: set lpspi0 max frequency to 60mhz
.../devicetree/bindings/arm/fsl.yaml | 19 +
arch/arm64/boot/dts/freescale/Makefile | 5 +
.../boot/dts/freescale/imx8-apalis-eval.dtsi | 134 ++
.../dts/freescale/imx8-apalis-ixora-v1.1.dtsi | 210 +++
.../dts/freescale/imx8-apalis-ixora-v1.2.dtsi | 258 +++
.../boot/dts/freescale/imx8-apalis-v1.1.dtsi | 1439 +++++++++++++++++
.../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 4 +-
.../boot/dts/freescale/imx8-ss-lsio.dtsi | 48 +
.../boot/dts/freescale/imx8qm-apalis-eval.dts | 16 +
.../freescale/imx8qm-apalis-ixora-v1.1.dts | 16 +
.../dts/freescale/imx8qm-apalis-v1.1-eval.dts | 16 +
.../imx8qm-apalis-v1.1-ixora-v1.1.dts | 16 +
.../imx8qm-apalis-v1.1-ixora-v1.2.dts | 16 +
.../dts/freescale/imx8qm-apalis-v1.1.dtsi | 16 +
.../boot/dts/freescale/imx8qm-apalis.dtsi | 340 ++++
15 files changed, 2552 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
--
2.35.1
