Add TCSR register space and refer it from scm node, so that
it can be used by SCM driver.
Signed-off-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 5704750..e0fa733 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -270,6 +270,7 @@
firmware {
scm: scm {
compatible = "qcom,scm-sm8450", "qcom,scm";
+ qcom,dload-mode = <&tcsr 0x13000>;
interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
#reset-cells = <1>;
};
@@ -1986,6 +1987,11 @@
#hwlock-cells = <1>;
};
+ tcsr: syscon@1fc0000 {
+ compatible = "syscon";
+ reg = <0x0 0x1fc0000 0x0 0x30000>;
+ };
+
usb_1_hsphy: phy@88e3000 {
compatible = "qcom,sm8450-usb-hs-phy",
"qcom,usb-snps-hs-7nm-phy";
--
2.7.4
