[PATCH v7 1/4] arm64: dts: qcom: sc8280xp: Define some of the display blocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Define the display clock controllers, the MDSS instances, the DP phys
and connect these together.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---

Changes since v6:
- Dropped assigned-clock-rate on MDP_CLK
- Rearranged the properties in all nodes

 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 811 +++++++++++++++++++++++++
 1 file changed, 811 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 0ea2f19d471b..2ed17baf50d3 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -4,6 +4,7 @@
  * Copyright (c) 2022, Linaro Limited
  */
 
+#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
@@ -2097,6 +2098,42 @@ usb_1_qmpphy: phy@8903000 {
 			status = "disabled";
 		};
 
+		mdss1_dp0_phy: phy@8909a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x08909a00 0 0x19c>,
+			      <0 0x08909200 0 0xec>,
+			      <0 0x08909600 0 0xec>,
+			      <0 0x08909000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss1_dp1_phy: phy@890ca00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x0890ca00 0 0x19c>,
+			      <0 0x0890c200 0 0xec>,
+			      <0 0x0890c600 0 0xec>,
+			      <0 0x0890c000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		pmu@9091000 {
 			compatible = "qcom,sc8280xp-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
 			reg = <0 0x9091000 0 0x1000>;
@@ -2303,6 +2340,314 @@ usb_1_dwc3: usb@a800000 {
 			};
 		};
 
+		mdss0: display-subsystem@ae00000 {
+			compatible = "qcom,sc8280xp-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+			iommus = <&apps_smmu 0x1000 0x402>;
+			power-domains = <&dispcc0 MDSS_GDSC>;
+			resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss0_mdp: display-controller@ae01000 {
+				compatible = "qcom,sc8280xp-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&gcc GCC_DISP_SF_AXI_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+				interrupt-parent = <&mdss0>;
+				interrupts = <0>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdss0_mdp_opp_table>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@5 {
+						reg = <5>;
+						mdss0_intf5_out: endpoint {
+							remote-endpoint = <&mdss0_dp3_in>;
+						};
+					};
+
+					port@6 {
+						reg = <6>;
+						mdss0_intf6_out: endpoint {
+							remote-endpoint = <&mdss0_dp2_in>;
+						};
+					};
+				};
+
+				mdss0_mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+					opp-600000000 {
+						opp-hz = /bits/ 64 <600000000>;
+						required-opps = <&rpmhpd_opp_turbo_l1>;
+					};
+				};
+			};
+
+			mdss0_dp2: displayport-controller@ae9a000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xae9a000 0 0x200>,
+				      <0 0xae9a200 0 0x200>,
+				      <0 0xae9a400 0 0x600>,
+				      <0 0xae9b000 0 0x400>;
+
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss0>;
+				interrupts = <14>;
+				phys = <&mdss0_dp2_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>;
+				operating-points-v2 = <&mdss0_dp2_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss0_dp2_in: endpoint {
+							remote-endpoint = <&mdss0_intf6_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss0_dp2_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss0_dp3: displayport-controller@aea0000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xaea0000 0 0x200>,
+				      <0 0xaea0200 0 0x200>,
+				      <0 0xaea0400 0 0x600>,
+				      <0 0xaea1000 0 0x400>;
+
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss0>;
+				interrupts = <15>;
+				phys = <&mdss0_dp3_phy>;
+				phy-names = "dp";
+				power-domains = <&dispcc0 MDSS_GDSC>;
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>;
+				operating-points-v2 = <&mdss0_dp3_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss0_dp3_in: endpoint {
+							remote-endpoint = <&mdss0_intf5_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss0_dp3_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		mdss0_dp2_phy: phy@aec2a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x0aec2a00 0 0x19c>,
+			      <0 0x0aec2200 0 0xec>,
+			      <0 0x0aec2600 0 0xec>,
+			      <0 0x0aec2000 0 0x1c8>;
+
+			clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss0_dp3_phy: phy@aec5a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x0aec5a00 0 0x19c>,
+			      <0 0x0aec5200 0 0xec>,
+			      <0 0x0aec5600 0 0xec>,
+			      <0 0x0aec5000 0 0x1c8>;
+
+			clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		dispcc0: clock-controller@af00000 {
+			compatible = "qcom,sc8280xp-dispcc0";
+			reg = <0 0x0af00000 0 0x20000>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&mdss0_dp2_phy 0>,
+				 <&mdss0_dp2_phy 1>,
+				 <&mdss0_dp3_phy 0>,
+				 <&mdss0_dp3_phy 1>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+
+			status = "disabled";
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sc8280xp-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -2925,6 +3270,472 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
 				qcom,remote-pid = <12>;
 			};
 		};
+
+		mdss1: display-subsystem@22000000 {
+			compatible = "qcom,sc8280xp-mdss";
+			reg = <0 0x22000000 0 0x1000>;
+			reg-names = "mdss";
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+			interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+			interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+
+			iommus = <&apps_smmu 0x1800 0x402>;
+			power-domains = <&dispcc1 MDSS_GDSC>;
+			resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>;
+
+			#interrupt-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss1_mdp: display-controller@22001000 {
+				compatible = "qcom,sc8280xp-dpu";
+				reg = <0 0x22001000 0 0x8f000>,
+				      <0 0x220b0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&gcc GCC_DISP_SF_AXI_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+				interrupt-parent = <&mdss1>;
+				interrupts = <0>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdss1_mdp_opp_table>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_intf0_out: endpoint {
+							remote-endpoint = <&mdss1_dp0_in>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						mdss1_intf4_out: endpoint {
+							remote-endpoint = <&mdss1_dp1_in>;
+						};
+					};
+
+					port@5 {
+						reg = <5>;
+						mdss1_intf5_out: endpoint {
+							remote-endpoint = <&mdss1_dp3_in>;
+						};
+					};
+
+					port@6 {
+						reg = <6>;
+						mdss1_intf6_out: endpoint {
+							remote-endpoint = <&mdss1_dp2_in>;
+						};
+					};
+				};
+
+				mdss1_mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+					opp-600000000 {
+						opp-hz = /bits/ 64 <600000000>;
+						required-opps = <&rpmhpd_opp_turbo_l1>;
+					};
+				};
+			};
+
+			mdss1_dp0: displayport-controller@22090000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x22090000 0 0x200>,
+				      <0 0x22090200 0 0x200>,
+				      <0 0x22090400 0 0x600>,
+				      <0 0x22091000 0 0x400>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss1>;
+				interrupts = <12>;
+				phys = <&mdss1_dp0_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>;
+				operating-points-v2 = <&mdss1_dp0_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp0_in: endpoint {
+							remote-endpoint = <&mdss1_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
+			};
+
+			mdss1_dp1: displayport-controller@22098000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x22098000 0 0x200>,
+				      <0 0x22098200 0 0x200>,
+				      <0 0x22098400 0 0x600>,
+				      <0 0x22099000 0 0x400>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss1>;
+				interrupts = <13>;
+				phys = <&mdss1_dp1_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>;
+				operating-points-v2 = <&mdss1_dp1_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp1_in: endpoint {
+							remote-endpoint = <&mdss1_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss1_dp2: displayport-controller@2209a000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x2209a000 0 0x200>,
+				      <0 0x2209a200 0 0x200>,
+				      <0 0x2209a400 0 0x600>,
+				      <0 0x2209b000 0 0x400>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss1>;
+				interrupts = <14>;
+				phys = <&mdss1_dp2_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>;
+				operating-points-v2 = <&mdss1_dp2_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp2_in: endpoint {
+							remote-endpoint = <&mdss1_intf6_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp2_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss1_dp3: displayport-controller@220a0000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x220a0000 0 0x200>,
+				      <0 0x220a0200 0 0x200>,
+				      <0 0x220a0400 0 0x600>,
+				      <0 0x220a1000 0 0x400>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss1>;
+				interrupts = <15>;
+				phys = <&mdss1_dp3_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>;
+				operating-points-v2 = <&mdss1_dp3_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp3_in: endpoint {
+							remote-endpoint = <&mdss1_intf5_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp3_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		mdss1_dp2_phy: phy@220c2a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x220c2a00 0 0x19c>,
+			      <0 0x220c2200 0 0xec>,
+			      <0 0x220c2600 0 0xec>,
+			      <0 0x220c2000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss1_dp3_phy: phy@220c5a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x220c5a00 0 0x19c>,
+			      <0 0x220c5200 0 0xec>,
+			      <0 0x220c5600 0 0xec>,
+			      <0 0x220c5000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		dispcc1: clock-controller@22100000 {
+			compatible = "qcom,sc8280xp-dispcc1";
+			reg = <0 0x22100000 0 0x20000>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <0>,
+				 <&mdss1_dp0_phy 0>,
+				 <&mdss1_dp0_phy 1>,
+				 <&mdss1_dp1_phy 0>,
+				 <&mdss1_dp1_phy 1>,
+				 <&mdss1_dp2_phy 0>,
+				 <&mdss1_dp2_phy 1>,
+				 <&mdss1_dp3_phy 0>,
+				 <&mdss1_dp3_phy 1>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+
+			status = "disabled";
+		};
 	};
 
 	sound: sound {
-- 
2.37.3




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux