Re: [PATCH v8 5/5] arm64: dts: qcom: msm8998: Configure CPRh

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 10.01.2023 18:56, Konrad Dybcio wrote:
> From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
> 
> Now that the CPR v3/v4/Hardened is ready, enable it on MSM8998.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
> [Konrad: separate from adding cpufreq, sort nodes and use lowercase hex]
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
This patch has many things wrong, please ignore..

Konrad
>  arch/arm64/boot/dts/qcom/msm8998.dtsi | 325 ++++++++++++++++++++++++++
>  1 file changed, 325 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> index af29a4bfd109..84f73484441f 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> @@ -139,6 +139,9 @@ CPU0: cpu@0 {
>  			capacity-dmips-mhz = <1024>;
>  			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
>  			next-level-cache = <&L2_0>;
> +			operating-points-v2 = <&cpu_gold_opp_table>;
> +			power-domains = <&apc_cprh 0>;
> +			power-domain-names = "cprh";
>  			L2_0: l2-cache {
>  				compatible = "cache";
>  				cache-level = <2>;
> @@ -153,6 +156,9 @@ CPU1: cpu@1 {
>  			capacity-dmips-mhz = <1024>;
>  			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
>  			next-level-cache = <&L2_0>;
> +			operating-points-v2 = <&cpu_gold_opp_table>;
> +			power-domains = <&apc_cprh 0>;
> +			power-domain-names = "cprh";
>  		};
>  
>  		CPU2: cpu@2 {
> @@ -163,6 +169,9 @@ CPU2: cpu@2 {
>  			capacity-dmips-mhz = <1024>;
>  			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
>  			next-level-cache = <&L2_0>;
> +			operating-points-v2 = <&cpu_gold_opp_table>;
> +			power-domains = <&apc_cprh 0>;
> +			power-domain-names = "cprh";
>  		};
>  
>  		CPU3: cpu@3 {
> @@ -173,6 +182,9 @@ CPU3: cpu@3 {
>  			capacity-dmips-mhz = <1024>;
>  			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
>  			next-level-cache = <&L2_0>;
> +			operating-points-v2 = <&cpu_gold_opp_table>;
> +			power-domains = <&apc_cprh 0>;
> +			power-domain-names = "cprh";
>  		};
>  
>  		CPU4: cpu@100 {
> @@ -183,6 +195,9 @@ CPU4: cpu@100 {
>  			capacity-dmips-mhz = <1536>;
>  			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
>  			next-level-cache = <&L2_1>;
> +			operating-points-v2 = <&cpu_silver_opp_table>;
> +			power-domains = <&apc_cprh 1>;
> +			power-domain-names = "cprh";
>  			L2_1: l2-cache {
>  				compatible = "cache";
>  				cache-level = <2>;
> @@ -197,6 +212,9 @@ CPU5: cpu@101 {
>  			capacity-dmips-mhz = <1536>;
>  			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
>  			next-level-cache = <&L2_1>;
> +			operating-points-v2 = <&cpu_silver_opp_table>;
> +			power-domains = <&apc_cprh 1>;
> +			power-domain-names = "cprh";
>  		};
>  
>  		CPU6: cpu@102 {
> @@ -207,6 +225,9 @@ CPU6: cpu@102 {
>  			capacity-dmips-mhz = <1536>;
>  			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
>  			next-level-cache = <&L2_1>;
> +			operating-points-v2 = <&cpu_silver_opp_table>;
> +			power-domains = <&apc_cprh 1>;
> +			power-domain-names = "cprh";
>  		};
>  
>  		CPU7: cpu@103 {
> @@ -217,6 +238,9 @@ CPU7: cpu@103 {
>  			capacity-dmips-mhz = <1536>;
>  			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
>  			next-level-cache = <&L2_1>;
> +			operating-points-v2 = <&cpu_silver_opp_table>;
> +			power-domains = <&apc_cprh 1>;
> +			power-domain-names = "cprh";
>  		};
>  
>  		cpu-map {
> @@ -310,6 +334,65 @@ scm {
>  		};
>  	};
>  
> +	cpu_gold_opp_table: opp-table-gold {
> +		compatible = "operating-points-v2";
> +		opp-shared;
> +
> +		opp-2208000000 {
> +			opp-hz = /bits/ 64 <2208000000>;
> +			required-opps = <&cprh_opp3>;
> +		};
> +
> +		opp-1113600000 {
> +			opp-hz = /bits/ 64 <1113600000>;
> +			required-opps = <&cprh_opp2>;
> +		};
> +
> +		opp-300000000 {
> +			opp-hz = /bits/ 64 <300000000>;
> +			required-opps = <&cprh_opp1>;
> +		};
> +	};
> +
> +	cpu_silver_opp_table: opp-table-silver {
> +		compatible = "operating-points-v2";
> +		opp-shared;
> +
> +		opp-1843200000 {
> +			opp-hz = /bits/ 64 <1843200000>;
> +			required-opps = <&cprh_opp3>;
> +		};
> +
> +		opp-1094400000 {
> +			opp-hz = /bits/ 64 <1094400000>;
> +			required-opps = <&cprh_opp2>;
> +		};
> +
> +		opp-300000000 {
> +			opp-hz = /bits/ 64 <300000000>;
> +			required-opps = <&cprh_opp1>;
> +		};
> +	};
> +
> +	cprh_opp_table: opp-table-cprh {
> +		compatible = "operating-points-v2-qcom-level";
> +
> +		cprh_opp1: opp1 {
> +			opp-level = <1>;
> +			qcom,opp-fuse-level = <1>;
> +		};
> +
> +		cprh_opp2: opp2 {
> +			opp-level = <2>;
> +			qcom,opp-fuse-level = <2>;
> +		};
> +
> +		cprh_opp3: opp3 {
> +			opp-level = <3>;
> +			qcom,opp-fuse-level = <2 3>;
> +		};
> +	};
> +
>  	psci {
>  		compatible = "arm,psci-1.0";
>  		method = "smc";
> @@ -839,6 +922,174 @@ qfprom: qfprom@784000 {
>  			#address-cells = <1>;
>  			#size-cells = <1>;
>  
> +			cpr_efuse_speedbin: speedbin@133 {
> +				reg = <0x133 0x8>;
> +				bits = <5 3>;
> +			};
> +
> +			cpr_fuse_revision: cpr_fusing_rev@13e {
> +				reg = <0x13e 0x1>;
> +				bits = <3 3>;
> +			};
> +
> +			/* CPR Ring Oscillator: Power Cluster */
> +			cpr_ro_sel3_pwrcl: rosel3_pwrcl@218 {
> +				reg = <0x218 0x1>;
> +				bits = <0 4>;
> +			};
> +
> +			cpr_ro_sel2_pwrcl: rosel2_pwrcl@218 {
> +				reg = <0x218 0x1>;
> +				bits = <4 4>;
> +			};
> +
> +			cpr_ro_sel1_pwrcl: rosel1_pwrcl@219 {
> +				reg = <0x219 0x1>;
> +				bits = <0 4>;
> +			};
> +
> +			cpr_ro_sel0_pwrcl: rosel0_pwrcl@219 {
> +				reg = <0x219 0x1>;
> +				bits = <4 4>;
> +			};
> +
> +			/* CPR Init Voltage: Power Cluster */
> +			cpr_init_voltage3_pwrcl: ivolt3_pwrcl@21a {
> +				reg = <0x21a 0x1>;
> +				bits = <0 6>;
> +			};
> +
> +			cpr_init_voltage2_pwrcl: ivolt2_pwrcl@21a {
> +				reg = <0x21a 0x1>;
> +				bits = <6 6>;
> +			};
> +
> +			cpr_init_voltage1_pwrcl: ivolt1_pwrcl@21b {
> +				reg = <0x21b 0x1>;
> +				bits = <4 6>;
> +			};
> +
> +			cpr_init_voltage0_pwrcl: ivolt0_pwrcl@21c {
> +				reg = <0x21c 0x1>;
> +				bits = <2 6>;
> +			};
> +
> +			/* CPR Target Quotients: Power Cluster */
> +			cpr_quot3_pwrcl: quot3_pwrcl@21d {
> +				reg = <0x21d 0x2>;
> +				bits = <6 12>;
> +			};
> +
> +			cpr_quot2_pwrcl: quot2_pwrcl@21f {
> +				reg = <0x21f 0x2>;
> +				bits = <2 11>;
> +			};
> +
> +			cpr_quot1_pwrcl: quot1_pwrcl@220 {
> +				reg = <0x220 0x2>;
> +				bits = <6 12>;
> +			};
> +
> +			cpr_quot0_pwrcl: quot0_pwrcl@222 {
> +				reg = <0x222 0x2>;
> +				bits = <2 12>;
> +			};
> +
> +			/* CPR Quotient Offsets: Power Cluster */
> +			cpr_quot_offset3_pwrcl: qoff3_pwrcl@226 {
> +				reg = <0x226 0x1>;
> +				bits = <1 7>;
> +			};
> +
> +			cpr_quot_offset2_pwrcl: qoff2_pwrcl@227 {
> +				reg = <0x227 0x1>;
> +				bits = <0 7>;
> +			};
> +
> +			cpr_quot_offset1_pwrcl: qoff1_pwrcl@227 {
> +				reg = <0x227 0x1>;
> +				bits = <7 6>;
> +			};
> +
> +			/* CPR Ring Oscillator: Performance Cluster */
> +			cpr_ro_sel3_perfcl: rosel3_perfcl@229 {
> +				reg = <0x229 0x1>;
> +				bits = <6 4>;
> +			};
> +
> +			cpr_ro_sel2_perfcl: rosel2_perfcl@22a {
> +				reg = <0x22a 0x1>;
> +				bits = <2 4>;
> +			};
> +
> +			cpr_ro_sel1_perfcl: rosel1_perfcl@22a {
> +				reg = <0x22a 0x1>;
> +				bits = <6 4>;
> +			};
> +
> +			cpr_ro_sel0_perfcl: rosel0_perfcl@22b {
> +				reg = <0x22b 0x1>;
> +				bits = <2 4>;
> +			};
> +
> +			/* CPR Init Voltage: Performance Cluster */
> +			cpr_init_voltage3_perfcl: ivolt3_perfcl@22b {
> +				reg = <0x22b 0x1>;
> +				bits = <6 6>;
> +			};
> +
> +			cpr_init_voltage2_perfcl: ivolt2_perfcl@22c {
> +				reg = <0x22c 0x1>;
> +				bits = <4 6>;
> +			};
> +
> +			cpr_init_voltage1_perfcl: ivolt1_perfcl@22d {
> +				reg = <0x22d 0x1>;
> +				bits = <2 6>;
> +			};
> +
> +			cpr_init_voltage0_perfcl: ivolt0_perfcl@22e {
> +				reg = <0x22e 0x1>;
> +				bits = <0 6>;
> +			};
> +
> +			/* CPR Target Quotients: Performance Cluster */
> +			cpr_quot3_perfcl: quot3_perfcl@22f {
> +				reg = <0x22f 0x2>;
> +				bits = <4 11>;
> +			};
> +
> +			cpr_quot2_perfcl: quot2_perfcl@231 {
> +				reg = <0x231 0x2>;
> +				bits = <0 12>;
> +			};
> +
> +			cpr_quot1_perfcl: quot1_perfcl@232 {
> +				reg = <0x232 0x2>;
> +				bits = <4 12>;
> +			};
> +
> +			cpr_quot0_perfcl: quot0_perfcl@234 {
> +				reg = <0x234 0x2>;
> +				bits = <0 12>;
> +			};
> +
> +			/* CPR Quotient Offsets: Performance Cluster */
> +			cpr_quot_offset3_perfcl: qoff3_perfcl@237 {
> +				reg = <0x237 0x1>;
> +				bits = <7 6>;
> +			};
> +
> +			cpr_quot_offset2_perfcl: qoff2_perfcl@238 {
> +				reg = <0x238 0x1>;
> +				bits = <6 7>;
> +			};
> +
> +			cpr_quot_offset1_perfcl: qoff1_perfcl@239 {
> +				reg = <0x239 0x1>;
> +				bits = <5 3>;
> +			};
> +
>  			qusb2_hstx_trim: hstx-trim@23a {
>  				reg = <0x23a 0x1>;
>  				bits = <0 4>;
> @@ -2998,6 +3249,80 @@ frame@17928000 {
>  			};
>  		};
>  
> +		apc_cprh: power-controller@179c8000 {
> +			compatible = "qcom,msm8998-cprh", "qcom,cprh";
> +			reg = <0x0179c4000 0x4000>, <0x0179c8000 0x4000>;
> +			clocks = <&gcc GCC_HMSS_RBCPR_CLK>;
> +			clock-names = "ref";
> +			operating-points-v2 = <&cprh_opp_table>;
> +			#power-domain-cells = <1>;
> +
> +			nvmem-cells = <&cpr_efuse_speedbin>,
> +				      <&cpr_fuse_revision>,
> +				      <&cpr_quot0_pwrcl>,
> +				      <&cpr_quot1_pwrcl>,
> +				      <&cpr_quot2_pwrcl>,
> +				      <&cpr_quot3_pwrcl>,
> +				      <&cpr_quot_offset1_pwrcl>,
> +				      <&cpr_quot_offset2_pwrcl>,
> +				      <&cpr_quot_offset3_pwrcl>,
> +				      <&cpr_init_voltage0_pwrcl>,
> +				      <&cpr_init_voltage1_pwrcl>,
> +				      <&cpr_init_voltage2_pwrcl>,
> +				      <&cpr_init_voltage3_pwrcl>,
> +				      <&cpr_ro_sel0_pwrcl>,
> +				      <&cpr_ro_sel1_pwrcl>,
> +				      <&cpr_ro_sel2_pwrcl>,
> +				      <&cpr_ro_sel3_pwrcl>,
> +				      <&cpr_quot0_perfcl>,
> +				      <&cpr_quot1_perfcl>,
> +				      <&cpr_quot2_perfcl>,
> +				      <&cpr_quot3_perfcl>,
> +				      <&cpr_quot_offset1_perfcl>,
> +				      <&cpr_quot_offset2_perfcl>,
> +				      <&cpr_quot_offset3_perfcl>,
> +				      <&cpr_init_voltage0_perfcl>,
> +				      <&cpr_init_voltage1_perfcl>,
> +				      <&cpr_init_voltage2_perfcl>,
> +				      <&cpr_init_voltage3_perfcl>,
> +				      <&cpr_ro_sel0_perfcl>,
> +				      <&cpr_ro_sel1_perfcl>,
> +				      <&cpr_ro_sel2_perfcl>,
> +				      <&cpr_ro_sel3_perfcl>;
> +			nvmem-cell-names = "cpr_speed_bin",
> +					   "cpr_fuse_revision",
> +					   "cpr0_quotient1",
> +					   "cpr0_quotient2",
> +					   "cpr0_quotient3",
> +					   "cpr0_quotient4",
> +					   "cpr0_quotient_offset2",
> +					   "cpr0_quotient_offset3",
> +					   "cpr0_quotient_offset4",
> +					   "cpr0_init_voltage1",
> +					   "cpr0_init_voltage2",
> +					   "cpr0_init_voltage3",
> +					   "cpr0_init_voltage4",
> +					   "cpr0_ring_osc1",
> +					   "cpr0_ring_osc2",
> +					   "cpr0_ring_osc3",
> +					   "cpr0_ring_osc4",
> +					   "cpr1_quotient1",
> +					   "cpr1_quotient2",
> +					   "cpr1_quotient3",
> +					   "cpr1_quotient4",
> +					   "cpr1_quotient_offset2",
> +					   "cpr1_quotient_offset3",
> +					   "cpr1_quotient_offset4",
> +					   "cpr1_init_voltage1",
> +					   "cpr1_init_voltage2",
> +					   "cpr1_init_voltage3",
> +					   "cpr1_init_voltage4",
> +					   "cpr1_ring_osc1",
> +					   "cpr1_ring_osc2",
> +					   "cpr1_ring_osc3",
> +					   "cpr1_ring_osc4";
> +		};
> +
>  		intc: interrupt-controller@17a00000 {
>  			compatible = "arm,gic-v3";
>  			reg = <0x17a00000 0x10000>,       /* GICD */



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux