The Parallella board comes with a U-Boot bootloader that loads one of
two predefined FPGA bitstreams before booting the kernel. Both define an
AXI interface to the on-board Epiphany processor.
Enable clocks FCLK0..FCLK3 for the Programmable Logic by default.
Otherwise accessing, e.g., the ESYSRESET register freezes the board,
as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem.
Cc: <stable@xxxxxxxxxxxxxxx> # 3.17.x
Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
---
Michal/Olof, please consider this trivial patch as a fix for 3.18.
arch/arm/boot/dts/zynq-parallella.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
index e1f51ca127fe..0429bbd89fba 100644
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -34,6 +34,10 @@
};
};
+&clkc {
+ fclk-enable = <0xf>;
+};
+
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
