Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx> writes: > Hi All, > > On 15/12/22 15:54, Chris Packham wrote: >> The correct address offset is 0x12100. >> >> Fixes: 31be791e26cf ("arm64: dts: marvell: Add UART1-3 for AC5/AC5X") >> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> >> --- >> Not sure how this happened. I only noticed when I had a conflict in some >> local patches I was rebasing against upstream. So I obviously had it >> right at one point but then managed to break it in the process of >> cleaning things up for submission. > > I know people have probably been away with various holidays but I think > it's been long enough so.... > > ping? Applied on mvebu/fixes Thanks, Gregory > >> >> arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi >> index 7308f7b6b22c..8bce64069138 100644 >> --- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi >> +++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi >> @@ -98,7 +98,7 @@ uart0: serial@12000 { >> >> uart1: serial@12100 { >> compatible = "snps,dw-apb-uart"; >> - reg = <0x11000 0x100>; >> + reg = <0x12100 0x100>; >> reg-shift = <2>; >> interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; >> reg-io-width = <1>; -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com