On 09/01/2023 22:59, Konrad Dybcio wrote:
On 9.01.2023 21:13, Dmitry Baryshkov wrote:
On 09/01/2023 19:44, Bartosz Golaszewski wrote:
From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
This adds basic support for the Qualcomm sa8775p platform and its reference
board: sa8775p-ride. The dtsi contains basic SoC description required for
a simple boot-to-shell. The dts enables boot-to-shell with UART on the
sa8775p-ride board. There are three new drivers required to boot the board:
pinctrl, interconnect and GCC clock. Other patches contain various tweaks
to existing code. More support is coming up.
Bartosz Golaszewski (15):
dt-bindings: clock: sa8775p: add bindings for Qualcomm gcc-sa8775p
arm64: defconfig: enable the clock driver for Qualcomm SA8775P
platforms
dt-bindings: clock: qcom-rpmhcc: document the clock for sa8775p
clk: qcom: rpmh: add clocks for sa8775p
dt-bindings: interconnect: qcom: document the interconnects for
sa8775p
arm64: defconfig: enable the interconnect driver for Qualcomm SA8775P
dt-bindings: pinctrl: sa8775p: add bindings for qcom,sa8775p-tlmm
arm64: defconfig: enable the pinctrl driver for Qualcomm SA8775P
platforms
dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform
dt-bindings: power: qcom,rpmpd: document sa8775p
soc: qcom: rmphpd: add power domains for sa8775p
dt-bindings: arm-smmu: document the smmu on Qualcomm SA8775P
iommu: arm-smmu: qcom: add support for sa8775p
dt-bindings: arm: qcom: document the sa8775p reference board
arm64: dts: qcom: add initial support for qcom sa8775p-ride
Shazad Hussain (2):
clk: qcom: add the GCC driver for sa8775p
This patch didn't make it to the list. Please check if you can fix or split it somehow?
It's a known issue with lists clipping messages that are too long.
I'll forward it to you.
Thank you!
--
With best wishes
Dmitry
