Add board file for the RK3588s Rock 5A board. While the hardware
offers plenty of peripherals and connectivity this basic implementation
just handles things required to access eMMC, UART and Ethernet (i.e.
enough to successfully boot Linux).
Reviewed-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
Tested-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3588s-rock-5a.dts | 73 +++++++++++++++++++
2 files changed, 74 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 7452c4b8cbe6..87a853435142 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -83,3 +83,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
new file mode 100644
index 000000000000..409a43d059d8
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588s.dtsi"
+
+/ {
+ model = "Radxa ROCK 5 Model A";
+ compatible = "radxa,rock-5a", "rockchip,rk3588s";
+
+ aliases {
+ mmc1 = &sdhci;
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-rxid";
+ pinctrl-0 = <&gmac1_miim
+ &gmac1_tx_bus2
+ &gmac1_rx_bus2
+ &gmac1_rgmii_clk
+ &gmac1_rgmii_bus>;
+ pinctrl-names = "default";
+ tx_delay = <0x3a>;
+ status = "okay";
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@1 {
+ /* RTL8211F */
+ compatible = "ethernet-phy-id001c.c916";
+ reg = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtl8211f_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pinctrl {
+ rtl8211f {
+ rtl8211f_rst: rtl8211f-rst {
+ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ };
+};
+
+&sdhci {
+ bus-width = <8>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
--
2.39.0
