SM6375 hosts an ADSP, CDSP and modem as remote processors. Create related bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> --- v2 -> v3: - Separate out 6375 bindings .../bindings/remoteproc/qcom,sm6375-pas.yaml | 137 ++++++++++++++++++ 1 file changed, 137 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml new file mode 100644 index 000000000000..60ee3fc7ab5b --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,sm6375-pas.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6375 Peripheral Authentication Service + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> + +description: + Qualcomm SM6375 SoC Peripheral Authentication Service loads and boots + firmware on the Qualcomm DSP Hexagon cores. + +properties: + compatible: + enum: + - qcom,sm6375-adsp-pas + - qcom,sm6375-cdsp-pas + - qcom,sm6375-mpss-pas + + reg: + maxItems: 1 + + clocks: + items: + - description: XO clock + + clock-names: + items: + - const: xo + + smd-edge: false + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/remoteproc/qcom,pas-common.yaml# + - if: + properties: + compatible: + enum: + - qcom,sm6375-adsp-pas + - qcom,sm6375-cdsp-pas + then: + properties: + interrupts: + maxItems: 5 + interrupt-names: + maxItems: 5 + else: + properties: + interrupts: + minItems: 6 + interrupt-names: + minItems: 6 + + - if: + properties: + compatible: + enum: + - qcom,sm6375-adsp-pas + then: + properties: + power-domains: + items: + - description: LCX power domain + - description: LMX power domain + power-domain-names: + items: + - const: lcx + - const: lmx + + - if: + properties: + compatible: + enum: + - qcom,sm6375-cdsp-pas + - qcom,sm6375-mpss-pas + then: + properties: + power-domains: + items: + - description: CX power domain + power-domain-names: + items: + - const: cx + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + remoteproc_adsp: remoteproc@a400000 { + compatible = "qcom,sm6375-adsp-pas"; + reg = <0x0a400000 0x100>; + + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6375_VDD_LPI_CX>, + <&rpmpd SM6375_VDD_LPI_MX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_adsp_mem>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + /* ... */ + }; + }; -- 2.39.0
