Re: [PATCH V4 2/2] arm64: dts: imx: Introduce imx8mp-beacon-kit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Dec 24, 2022 at 07:28:19PM -0600, Adam Ford wrote:
> Beacon Embedded has an i.MX8M Plus development kit which consists
> of a SOM + baseboard.  The SOM includes Bluetooth, WiFi, QSPI, eMMC,
> and one Ethernet PHY. The baseboard includes audio, HDMI, USB-C Dual
> Role port, USB Hub with five ports, a PCIe slot, and a second Ethernet
> PHY.
> 
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> ---
> V4:  Change names of hd3ss3220 and ptn5100 to usb-typec,
>      change gpio-i2c2 to gpio, and connector-1 to connector
> 
> V3:  Fix missing Makefile change, fix led names
> 
> V2:  Fix whitespace, remove dead nodes, and fix some node and
> parameter names to address errors in 'make dt_binding_check'
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index ef6f364eaa18..7179acbeb718 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -86,6 +86,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
> new file mode 100644
> index 000000000000..62a612d4f1eb
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
> @@ -0,0 +1,548 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2022 Logic PD, Inc dba Beacon EmbeddedWorks
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/usb/pd.h>
> +#include <dt-bindings/phy/phy-imx8-pcie.h>
> +#include "imx8mp.dtsi"
> +#include "imx8mp-beacon-som.dtsi"
> +
> +/ {
> +	model = "Beacon EmbeddedWorks i.MX8MPlus Development kit";
> +	compatible = "beacon,imx8mp-beacon-kit", "fsl,imx8mp";
> +
> +	aliases {
> +		ethernet0 = &eqos;
> +		ethernet1 = &fec;
> +	};
> +
> +	chosen {
> +		stdout-path = &uart2;
> +	};
> +
> +	connector {
> +		compatible = "usb-c-connector";
> +		label = "USB-C";
> +		data-role = "dual";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;

Have a newline between properties and child node.

> +			port@0 {
> +				reg = <0>;

Ditto

> +				hs_ep: endpoint {
> +					remote-endpoint = <&usb3_hs_ep>;
> +				};
> +			};

Have a newline between nodes.

> +			port@1 {
> +				reg = <1>;
> +				ss_ep: endpoint {
> +					remote-endpoint = <&hd3ss3220_in_ep>;
> +				};
> +			};
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		autorepeat;
> +
> +		button-0 {
> +			label = "btn0";
> +			linux,code = <BTN_0>;
> +			gpios = <&pca6416_1 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> +			wakeup-source;
> +		};
> +
> +		button-1 {
> +			label = "btn1";
> +			linux,code = <BTN_1>;
> +			gpios = <&pca6416_1 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> +			wakeup-source;
> +		};
> +
> +		button-2 {
> +			label = "btn2";
> +			linux,code = <BTN_2>;
> +			gpios = <&pca6416_1 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> +			wakeup-source;
> +		};
> +
> +		button-3 {
> +			label = "btn3";
> +			linux,code = <BTN_3>;
> +			gpios = <&pca6416_1 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> +			wakeup-source;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led-0 {
> +			label = "gen_led0";
> +			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		led-1 {
> +			label = "gen_led1";
> +			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		led-2 {
> +			label = "gen_led2";
> +			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +
> +		led-3 {
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_led3>;

Hmm, shouldn't the pinctrl be in parent node?

> +			label = "heartbeat";
> +			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	pcie0_refclk: pcie0-refclk {

clock-xxx for node name?

> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <100000000>;
> +	};
> +
> +	reg_usdhc2_vmmc: regulator-usdhc2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VSD_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		startup-delay-us = <100>;
> +		off-on-delay-us = <20000>;
> +	};
> +
> +	reg_usb1_host_vbus: regulator-usb1-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usb1_host_vbus";
> +		regulator-max-microvolt = <5000000>;
> +		regulator-min-microvolt = <5000000>;
> +		gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +};
> +
> +&ecspi2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi2>;
> +	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> +	status = "okay";
> +
> +	tpm: tpm@0 {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_tpm>;

Can these be put after 'reg'?  We usually start with 'compatible'.

> +		compatible = "infineon,slb9670";
> +		reg = <0>;
> +		reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
> +		spi-max-frequency = <18500000>;
> +	};
> +};
> +
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_fec>;
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&ethphy1>;
> +	phy-reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
> +	phy-reset-post-delay = <150>;
> +	phy-reset-duration = <10>;

These phy-reset properties are deprecated for FEC node.  Check out the
binding documents:

  Documentation/devicetree/bindings/net/fsl,fec.yaml
  Documentation/devicetree/bindings/net/ethernet-phy.yaml

> +	fsl,magic-packet;
> +	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy1: ethernet1-phy@3 {
> +			compatible = "ethernet-phy-ieee802.3-c22";
> +			reg = <3>;
> +		};
> +	};
> +};
> +
> +&flexcan1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan1>;
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	clock-frequency = <384000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	pca6416_3: gpio@20 {
> +		compatible = "nxp,pcal6416";
> +		reg = <0x20>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-parent = <&gpio4>;
> +		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +};
> +
> +&i2c3 {
> +	/* Connected to USB Hub */
> +	usb-typec@52 {
> +		compatible = "nxp,ptn5110";
> +		reg = <0x52>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_typec>;
> +		interrupt-parent = <&gpio4>;
> +		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
> +
> +		connector {
> +			compatible = "usb-c-connector";
> +			label = "USB-C";
> +			power-role = "source";
> +			data-role = "host";
> +			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
> +		};
> +	};
> +};
> +
> +&i2c4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c4>;
> +	clock-frequency = <384000>;
> +	status = "okay";
> +
> +	pca6416: gpio@20 {
> +		compatible = "nxp,pcal6416";
> +		reg = <0x20>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_pcal6414>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-parent = <&gpio4>;
> +		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	pca6416_1: gpio@21 {
> +		compatible = "nxp,pcal6416";
> +		reg = <0x21>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-parent = <&gpio4>;
> +		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +
> +		usb-hub-hog {
> +			gpio-hog;
> +			gpios = <7 0>;
> +			output-low;
> +			line-name = "USB Hub Enable";
> +		};
> +	};
> +
> +	usb-typec@47 {
> +		compatible = "ti,hd3ss3220";
> +		reg = <0x47>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_hd3ss3220>;
> +		interrupt-parent = <&gpio4>;
> +		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;

Newline.

> +			port@0 {
> +				reg = <0>;

Ditto

> +				hd3ss3220_in_ep: endpoint {
> +					remote-endpoint = <&ss_ep>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;

Ditto

> +				hd3ss3220_out_ep: endpoint {
> +					remote-endpoint = <&usb3_role_switch>;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&gpio2 {

Out of order.

> +	usb-mux-hog {
> +		gpio-hog;
> +		gpios = <20 0>;
> +		output-low;
> +		line-name = "USB-C Mux En";
> +	};
> +};
> +
> +&pcie {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pcie>;
> +	reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
> +	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
> +		 <&clk IMX8MP_CLK_PCIE_ROOT>,
> +		 <&clk IMX8MP_CLK_HSIO_AXI>;
> +	clock-names = "pcie", "pcie_aux", "pcie_bus";
> +	assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
> +	assigned-clock-rates = <10000000>;
> +	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;

Aren't these clock setup already in imx8mp.dtsi?

> +	status = "okay";
> +};
> +
> +&pcie_phy {
> +	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> +	clocks = <&pcie0_refclk>;
> +	clock-names = "ref";
> +	status = "okay";
> +};
> +
> +&snvs_pwrkey {
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	status = "okay";
> +};
> +
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart3>;
> +	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
> +	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
> +	fsl,uart-has-rtscts;

uart-has-rtscts

> +	status = "okay";
> +};
> +
> +&usb3_phy0 {
> +	vbus-supply = <&reg_usb1_host_vbus>;
> +	status = "okay";
> +};
> +
> +&usb3_0 {
> +	status = "okay";
> +};
> +
> +&usb_dwc3_0 {
> +	dr_mode = "otg";
> +	hnp-disable;
> +	srp-disable;
> +	adp-disable;
> +	usb-role-switch;
> +	status = "okay";
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;

Newline

> +		port@0 {
> +			reg = <0>;
> +			usb3_hs_ep: endpoint {
> +				remote-endpoint = <&hs_ep>;
> +			};
> +		};
> +		port@1 {
> +			reg = <1>;
> +			usb3_role_switch: endpoint {
> +				remote-endpoint = <&hd3ss3220_out_ep>;
> +			};
> +		};
> +	};
> +};
> +
> +&usb3_phy1 {
> +	status = "okay";
> +};
> +
> +&usb3_1 {
> +	status = "okay";
> +};
> +
> +&usb_dwc3_1 {
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&usdhc2 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> +	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> +	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> +	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> +	vmmc-supply = <&reg_usdhc2_vmmc>;
> +	bus-width = <4>;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +

Unneeded newline.

> +	pinctrl_ecspi2: ecspi2grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x82
> +			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x82
> +			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x82
> +			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x40000
> +		>;
> +	};
> +
> +	pinctrl_fec: fecgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC	0x2
> +			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO	0x2
> +			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x90
> +			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x90
> +			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x90
> +			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x90
> +			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC	0x90
> +			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
> +			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x16
> +			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x16
> +			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x16
> +			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x16
> +			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x16
> +			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x16
> +			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x10
> +			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x10
> +		>;
> +	};
> +
> +	pinctrl_flexcan1: flexcan1grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX	0x154
> +			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX	0x154
> +		>;
> +	};
> +
> +	pinctrl_hd3ss3220: hd3ss3220grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x140
> +		>;
> +	};
> +
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL	0x400001c2
> +			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA	0x400001c2
> +		>;
> +	};
> +
> +	pinctrl_i2c4: i2c4grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL	0x400001c2
> +			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA	0x400001c2
> +		>;
> +	};
> +
> +	pinctrl_led3: led3grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x41
> +		>;
> +	};
> +
> +	pinctrl_pcal6414: pcal6414-gpiogrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x10
> +		>;
> +	};
> +
> +	pinctrl_pcie: pciegrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05	0x10 /* PCIe_nDIS */
> +			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x10	/* PCIe_nRST */
> +		>;
> +	};
> +
> +	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
> +		>;
> +	};
> +
> +	pinctrl_tpm: tpmgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19 /* Reset */
> +			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x1d6 /* IRQ */
> +		>;
> +	};
> +
> +	pinctrl_typec: typec1grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0xc4
> +		>;
> +	};
> +
> +	pinctrl_uart2: uart2grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
> +			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
> +		>;
> +	};
> +
> +	pinctrl_uart3: uart3grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
> +			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
> +			MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS		0x140
> +			MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS		0x140
> +		>;
> +	};
> +
> +	pinctrl_usdhc2: usdhc2grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
> +			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
> +			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
> +			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
> +			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
> +			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
> +			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
> +			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
> +			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
> +			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
> +			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
> +			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
> +			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
> +			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
> +			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
> +			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
> +			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
> +			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
> +			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
> +		>;
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
> new file mode 100644
> index 000000000000..fdd60330a8df
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
> @@ -0,0 +1,416 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright LogicPD, Inc. dba Beacon EmbeddedWorks
> + */
> +
> +/ {
> +	aliases {
> +		rtc0 = &rtc;
> +		rtc1 = &snvs_rtc;
> +	};
> +
> +	memory@40000000 {
> +		device_type = "memory";
> +		reg = <0x0 0x40000000 0 0xc0000000>,
> +		      <0x1 0x00000000 0 0xc0000000>;
> +	};
> +
> +	reg_wl_bt: regulator-wifi-bt {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_wl_bt>;
> +		regulator-name = "wl-bt-pow-dwn";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
> +		startup-delay-us = <70000>;
> +		regulator-always-on;
> +	};
> +};
> +
> +&A53_0 {
> +	cpu-supply = <&buck2>;
> +};
> +
> +&A53_1 {
> +	cpu-supply = <&buck2>;
> +};
> +
> +&A53_2 {
> +	cpu-supply = <&buck2>;
> +};
> +
> +&A53_3 {
> +	cpu-supply = <&buck2>;
> +};
> +
> +&eqos {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_eqos>;
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&ethphy0>;
> +	snps,force_thresh_dma_mode;
> +	status = "okay";
> +
> +	mdio {
> +		compatible = "snps,dwmac-mdio";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy0: ethernet-phy@3 {
> +			compatible = "ethernet-phy-ieee802.3-c22";
> +			reg = <3>;
> +			reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
> +			interrupt-parent = <&gpio1>;
> +			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
> +		};
> +	};
> +};
> +
> +&flexspi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexspi0>;
> +	status = "okay";
> +
> +	flash0: flash@0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0>;
> +		spi-max-frequency = <80000000>;
> +		spi-tx-bus-width = <1>;
> +		spi-rx-bus-width = <4>;
> +	};
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	clock-frequency = <384000>;
> +	status = "okay";
> +
> +	pmic@25 {
> +		compatible = "nxp,pca9450c";
> +		reg = <0x25>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_pmic>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> +
> +		regulators {
> +			buck1: BUCK1 {
> +				regulator-name = "BUCK1";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <2187500>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <3125>;
> +			};
> +
> +			buck2: BUCK2 {
> +				regulator-name = "BUCK2";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <2187500>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <3125>;
> +				nxp,dvs-run-voltage = <950000>;
> +				nxp,dvs-standby-voltage = <850000>;
> +			};
> +
> +			buck4: BUCK4 {
> +				regulator-name = "BUCK4";
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			buck5: BUCK5 {
> +				regulator-name = "BUCK5";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			buck6: BUCK6 {
> +				regulator-name = "BUCK6";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <3400000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo1: LDO1 {
> +				regulator-name = "LDO1";
> +				regulator-min-microvolt = <1600000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo3: LDO3 {
> +				regulator-name = "LDO3";
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo4: LDO4 {
> +				regulator-name = "LDO4";
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo5: LDO5 {
> +				regulator-name = "LDO5";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +};
> +
> +&i2c3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c3>;
> +	clock-frequency = <384000>;
> +	status = "okay";
> +
> +	eeprom@50 {
> +		compatible = "atmel,24c64";
> +		reg = <0x50>;
> +		pagesize = <32>;
> +		read-only;	/* Manufacturing EEPROM programmed at factory */
> +	};
> +
> +	rtc: rtc@51 {
> +		compatible = "nxp,pcf85263";
> +		reg = <0x51>;
> +	};
> +};
> +
> +&snvs_pwrkey {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
> +	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
> +	uart-has-rtscts;
> +	status = "okay";
> +};
> +
> +&usdhc1 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> +	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> +	bus-width = <4>;
> +	vmmc-supply = <&reg_wl_bt>;
> +	cap-sd-highspeed;
> +	sd-uhs-sdr50;
> +	sd-uhs-sdr104;
> +	keep-power-in-suspend;
> +	wakeup-source;
> +	non-removable;
> +	cap-power-off-card;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	status = "okay";
> +
> +	mwifiex: wifi@1 {
> +		compatible = "marvell,sd8997";
> +		reg = <1>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_wlan>;
> +		interrupt-parent = <&gpio2>;
> +		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +};
> +
> +&usdhc3 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc3>;
> +	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> +	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> +	bus-width = <8>;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&wdog1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_wdog>;
> +	fsl,ext-reset-output;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +

Unneeded newline.

Shawn

> +	pinctrl_eqos: eqosgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x2
> +			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x2
> +			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x90
> +			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x90
> +			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x90
> +			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x90
> +			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
> +			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x90
> +			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x16
> +			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x16
> +			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x16
> +			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x16
> +			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x16
> +			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
> +			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x10
> +			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x10
> +		>;
> +	};
> +
> +	pinctrl_flexspi0: flexspi0grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK           0x1c2
> +			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B        0x82
> +			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00      0x82
> +			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01      0x82
> +			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02      0x82
> +			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03      0x82
> +		>;
> +	};
> +
> +	pinctrl_i2c1: i2c1grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
> +			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
> +		>;
> +	};
> +
> +	pinctrl_i2c3: i2c3grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
> +			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2
> +		>;
> +	};
> +
> +	pinctrl_pmic: pmicgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x1c0
> +		>;
> +	};
> +
> +	pinctrl_reg_wl_bt: reg-wl-btgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x40
> +		>;
> +	};
> +
> +	pinctrl_uart1: uart1grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
> +			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
> +			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
> +			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
> +		>;
> +	};
> +
> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
> +			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
> +			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
> +			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
> +			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
> +			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
> +		>;
> +	};
> +
> +	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
> +			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
> +			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
> +			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
> +			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
> +			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
> +		>;
> +	};
> +
> +	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
> +			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
> +			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
> +			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
> +			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
> +			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
> +		>;
> +	};
> +
> +	pinctrl_usdhc3: usdhc3grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
> +			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
> +			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
> +			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
> +			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
> +			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
> +			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
> +			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
> +			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
> +			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
> +			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
> +		>;
> +	};
> +
> +	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
> +			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
> +			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
> +			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
> +			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
> +			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
> +			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
> +			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
> +			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
> +			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
> +			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
> +		>;
> +	};
> +
> +	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
> +			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
> +			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
> +			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
> +			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
> +			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
> +			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
> +			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
> +			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
> +			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
> +			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
> +		>;
> +	};
> +
> +	pinctrl_wdog: wdoggrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
> +		>;
> +	};
> +
> +	pinctrl_wlan: wlangrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x140
> +		>;
> +	};
> +};
> -- 
> 2.34.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux