> -----Original Message----- > From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@xxxxxxxxxx] > Sent: 03 January 2023 04:41 PM > To: Padmanabhan Rajanbabu <p.rajanbabu@xxxxxxxxxxx>; > lgirdwood@xxxxxxxxx; broonie@xxxxxxxxxx; robh+dt@xxxxxxxxxx; > krzysztof.kozlowski+dt@xxxxxxxxxx; s.nawrocki@xxxxxxxxxxx; > perex@xxxxxxxx; tiwai@xxxxxxxx; pankaj.dubey@xxxxxxxxxxx; > alim.akhtar@xxxxxxxxxxx; rcsekar@xxxxxxxxxxx; > aswani.reddy@xxxxxxxxxxx > Cc: alsa-devel@xxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx; linux-samsung-soc@xxxxxxxxxxxxxxx > Subject: Re: [PATCH v2 4/5] arm64: dts: fsd: Add codec node for Tesla FSD > > On 03/01/2023 05:56, Padmanabhan Rajanbabu wrote: > > Add device tree node support for codec on Tesla FSD platform. > > > > Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@xxxxxxxxxxx> > > --- > > arch/arm64/boot/dts/tesla/fsd-evb.dts | 13 +++++++++++++ > > 1 file changed, 13 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts > > b/arch/arm64/boot/dts/tesla/fsd-evb.dts > > index cf5f2ce4d2a7..e2fd49774f15 100644 > > --- a/arch/arm64/boot/dts/tesla/fsd-evb.dts > > +++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts > > @@ -10,6 +10,7 @@ > > > > /dts-v1/; > > #include "fsd.dtsi" > > +#include <dt-bindings/gpio/gpio.h> > > > > / { > > model = "Tesla Full Self-Driving (FSD) Evaluation board"; @@ -34,6 > > +35,18 @@ > > clock-frequency = <24000000>; > > }; > > > > +&hsi2c_5 { > > + status = "okay"; > > + > > + tlv320aic3x: codec@18 { > > + #sound-dai-cells = <0>; > > + compatible = "ti,tlv320aic3104"; > > + reg = <0x18>; > > First compatible, then reg, then the rest. Okay, I'll update the same in the next patch set. > > > + reset-gpios = <&gpg1 6 GPIO_ACTIVE_LOW>; > > + status = "okay"; > > It's by default. Why do you need it? Okay, I understood that if there is no status entry, it is treated as "okay". I'll update the same in the next patch set. > > Best regards, > Krzysztof Thanks, Padmanabhan R.
