Dne nedelja, 01. januar 2023 ob 00:14:23 CET je Samuel Holland napisal(a): > R528 and T113 are SoCs based on the same design as D1/D1s, but with ARM > CPUs instead of RISC-V. They use the same CCU implementation, meaning > the CCU has gates/resets for all peripherals present on any SoC in this > family. I verified the CAN bus bits are also present on D1/D1s. > > Patches 1-2 clean up the Kconfig in preparation for patch 3, which > allows building the driver. Patches 4-6 add the missing binding header > and driver bits. > > Changes in v2: > - Expand commit message > - Move dt-bindings header changes to a separate patch > > András Szemző (1): > clk: sunxi-ng: d1: Mark cpux clock as critical > > Fabien Poussin (1): > clk: sunxi-ng: d1: Add CAN bus gates and resets > > Samuel Holland (4): > clk: sunxi-ng: Remove duplicate ARCH_SUNXI dependencies > clk: sunxi-ng: Move SoC driver conditions to dependencies > clk: sunxi-ng: d1: Allow building for R528/T113 > dt-bindings: clock: Add D1 CAN bus gates and resets > > drivers/clk/sunxi-ng/Kconfig | 71 ++++++++++++----------- > drivers/clk/sunxi-ng/ccu-sun20i-d1.c | 13 ++++- > drivers/clk/sunxi-ng/ccu-sun20i-d1.h | 2 +- > include/dt-bindings/clock/sun20i-d1-ccu.h | 2 + > include/dt-bindings/reset/sun20i-d1-ccu.h | 2 + > 5 files changed, 53 insertions(+), 37 deletions(-) Applied, thanks! Best regards, Jernej
