On 06/01/2023 15:39, Alex Elder wrote:
On 1/6/23 1:33 AM, Dmitry Baryshkov wrote:
Follow the example of sc7180 and sdx55 and implement IP0 resource as
clocks rather than interconnects.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
So this is simply adding these clocks? Were they not
defined/implemented as interconnects before? (It
isn't clear from your message above, and I just want
to be sure there's no duplication.)
Well, that's the point of the patchset: to turn them from ICC to clock.
I can change the order of the patches in the patchset, if you think it
will make it more obvious.
-Alex
---
drivers/clk/qcom/clk-rpmh.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index 586a810c682c..5f914cf36b10 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -445,6 +445,7 @@ static struct clk_hw *sm8150_rpmh_clocks[] = {
[RPMH_RF_CLK2_A] = &clk_rpmh_rf_clk2_a_ao.hw,
[RPMH_RF_CLK3] = &clk_rpmh_rf_clk3_a.hw,
[RPMH_RF_CLK3_A] = &clk_rpmh_rf_clk3_a_ao.hw,
+ [RPMH_IPA_CLK] = &clk_rpmh_ipa.hw,
};
static const struct clk_rpmh_desc clk_rpmh_sm8150 = {
@@ -484,6 +485,7 @@ static struct clk_hw *sc8180x_rpmh_clocks[] = {
[RPMH_RF_CLK2_A] = &clk_rpmh_rf_clk2_d_ao.hw,
[RPMH_RF_CLK3] = &clk_rpmh_rf_clk3_d.hw,
[RPMH_RF_CLK3_A] = &clk_rpmh_rf_clk3_d_ao.hw,
+ [RPMH_IPA_CLK] = &clk_rpmh_ipa.hw,
};
static const struct clk_rpmh_desc clk_rpmh_sc8180x = {
@@ -504,6 +506,7 @@ static struct clk_hw *sm8250_rpmh_clocks[] = {
[RPMH_RF_CLK1_A] = &clk_rpmh_rf_clk1_a_ao.hw,
[RPMH_RF_CLK3] = &clk_rpmh_rf_clk3_a.hw,
[RPMH_RF_CLK3_A] = &clk_rpmh_rf_clk3_a_ao.hw,
+ [RPMH_IPA_CLK] = &clk_rpmh_ipa.hw,
};
static const struct clk_rpmh_desc clk_rpmh_sm8250 = {
@@ -546,6 +549,7 @@ static struct clk_hw *sc8280xp_rpmh_clocks[] = {
[RPMH_IPA_CLK] = &clk_rpmh_ipa.hw,
[RPMH_PKA_CLK] = &clk_rpmh_pka.hw,
[RPMH_HWKM_CLK] = &clk_rpmh_hwkm.hw,
+ [RPMH_IPA_CLK] = &clk_rpmh_ipa.hw,
};
static const struct clk_rpmh_desc clk_rpmh_sc8280xp = {
--
With best wishes
Dmitry