Introducing enum pruss_pru_id for PRU Core Identifiers. PRUSS_PRU0 indicates PRU Core 0. PRUSS_PRU1 indicates PRU Core 1. PRUSS_NUM_PRUS indicates the total number of PRU Cores. Signed-off-by: MD Danish Anwar <danishanwar@xxxxxx> Reviewed-by: Roger Quadros <rogerq@xxxxxxxxxx> --- drivers/remoteproc/pru_rproc.c | 7 ++++--- include/linux/remoteproc/pruss.h | 31 +++++++++++++++++++++++++++++++ 2 files changed, 35 insertions(+), 3 deletions(-) create mode 100644 include/linux/remoteproc/pruss.h diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c index 128bf9912f2c..f8b196a2b72a 100644 --- a/drivers/remoteproc/pru_rproc.c +++ b/drivers/remoteproc/pru_rproc.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/of_device.h> #include <linux/of_irq.h> +#include <linux/remoteproc/pruss.h> #include <linux/pruss_driver.h> #include <linux/remoteproc.h> @@ -438,7 +439,7 @@ static void *pru_d_da_to_va(struct pru_rproc *pru, u32 da, size_t len) dram0 = pruss->mem_regions[PRUSS_MEM_DRAM0]; dram1 = pruss->mem_regions[PRUSS_MEM_DRAM1]; /* PRU1 has its local RAM addresses reversed */ - if (pru->id == 1) + if (pru->id == PRUSS_PRU1) swap(dram0, dram1); shrd_ram = pruss->mem_regions[PRUSS_MEM_SHRD_RAM2]; @@ -747,14 +748,14 @@ static int pru_rproc_set_id(struct pru_rproc *pru) case RTU0_IRAM_ADDR_MASK: fallthrough; case PRU0_IRAM_ADDR_MASK: - pru->id = 0; + pru->id = PRUSS_PRU0; break; case TX_PRU1_IRAM_ADDR_MASK: fallthrough; case RTU1_IRAM_ADDR_MASK: fallthrough; case PRU1_IRAM_ADDR_MASK: - pru->id = 1; + pru->id = PRUSS_PRU1; break; default: ret = -EINVAL; diff --git a/include/linux/remoteproc/pruss.h b/include/linux/remoteproc/pruss.h new file mode 100644 index 000000000000..e94a81e97a4c --- /dev/null +++ b/include/linux/remoteproc/pruss.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/** + * PRU-ICSS Subsystem user interfaces + * + * Copyright (C) 2015-2022 Texas Instruments Incorporated - http://www.ti.com + * Suman Anna <s-anna@xxxxxx> + */ + +#ifndef __LINUX_PRUSS_H +#define __LINUX_PRUSS_H + +#include <linux/device.h> +#include <linux/types.h> + +#define PRU_RPROC_DRVNAME "pru-rproc" + +/** + * enum pruss_pru_id - PRU core identifiers + * @PRUSS_PRU0: PRU Core 0. + * @PRUSS_PRU1: PRU Core 1. + * @PRUSS_NUM_PRUS: Total number of PRU Cores available. + * + */ + +enum pruss_pru_id { + PRUSS_PRU0 = 0, + PRUSS_PRU1, + PRUSS_NUM_PRUS, +}; + +#endif /* __LINUX_PRUSS_H */ -- 2.25.1
