Re: [PATCH 1/2] dt-bindings: media: Add schema for OmniVision OV8858

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/01/2023 18:23, Jacopo Mondi wrote:
> From: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
> 

Subject: drop redundant "schema for".

> Add binding schema for the OmniVision OV8858 8 Megapixels camera sensor.
> 

Thank you for your patch. There is something to discuss/improve.

> +properties:
> +  compatible:
> +    const: ovti,ov8858
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +    description: XVCLK external clock
> +
> +  clock-names:
> +    const: xvclk
> +
> +  dvdd-supply:
> +    description: Digital Domain Power Supply
> +
> +  avdd-supply:
> +    description: Analog Domain Power Supply
> +
> +  dovdd-supply:
> +    description: I/O Domain Power Supply
> +
> +  powerdown-gpios:
> +    maxItems: 1

No need for maxItems here - it is coming from gpio-consumer-common.

> +    description: PWDNB powerdown GPIO (active low)
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: XSHUTDN reset GPIO (active low)
> +
> +  port:
> +    description: MIPI CSI-2 transmitter port
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +    additionalProperties: false
> +
> +    properties:
> +      endpoint:
> +        $ref: /schemas/media/video-interfaces.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          data-lanes:
> +            minItems: 1
> +            maxItems: 4
> +
> +        required:
> +          - data-lanes
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - assigned-clocks
> +  - assigned-clock-rates

These should not be required.

> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/pinctrl/rockchip.h>

Drop, not needed.

> +    #include <dt-bindings/clock/rk3399-cru.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c2 {

i2c

> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        ov8858: camera@36 {
> +            compatible = "ovti,ov8858";
> +            reg = <0x36>;
> +
> +            clocks = <&cru SCLK_CIF_OUT>;
> +            clock-names = "xvclk";
> +            assigned-clocks = <&cru SCLK_CIF_OUT>;
> +            assigned-clock-rates = <24000000>;
> +
> +            dovdd-supply = <&vcc1v8_dvp>;
> +
> +            reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>;
> +            powerdown-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>;
> +
> +            port {
> +                ucam_out: endpoint {
> +                    remote-endpoint = <&mipi_in_ucam>;
> +                    data-lanes = <1 2 3 4>;
> +                };
> +            };
> +        };
> +    };
> +...
> --
> 2.38.1
> 

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux