The MangoPi MQ-R is a small SBC with the Allwinner T113-s3 SoC. That is a very close relative to the Allwinner D1/D1s SoCs, but with Arm Cortex-A7 cores, and 128 MB of SIP co-packaged DDR3 DRAM. This series introduces the missing T113-s .dtsi, which builds on top of the D1/D1s .dtsi, but adds the ARM specific peripherals, like the CPU cores, the arch timer, the GIC and the PMU. This requires to add a symlink to the RISC-V DT directory in patch 1/4, to be able to easily reference the base .dtsi from other architecture directories. After I had written most of the board .dts, I realised that the MangoPi MQ is almost the same, minus the RISC-V/ARM difference. I am a bit unsure if we should share more of the board .dts, though, as this would go cross architectures. I am open to any comments here. Please have a look! Cheers, Andre Andre Przywara (4): dts: add riscv include prefix link ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi dt-bindings: arm: sunxi: document MangoPi MQ-R board name ARM: dts: sunxi: add MangoPi MQ-R board .../devicetree/bindings/arm/sunxi.yaml | 5 + arch/arm/boot/dts/Makefile | 1 + .../arm/boot/dts/sun8i-t113s-mangopi-mq-r.dts | 160 ++++++++++++++++++ arch/arm/boot/dts/sun8i-t113s.dtsi | 59 +++++++ scripts/dtc/include-prefixes/riscv | 1 + 5 files changed, 226 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r.dts create mode 100644 arch/arm/boot/dts/sun8i-t113s.dtsi create mode 120000 scripts/dtc/include-prefixes/riscv -- 2.35.5
