In preparation for adding the missing SPI and I2C nodes to sc8280xp.dtsi, it was decided to rename all of the existing qupX_ uart, spi, and i2c nodes to drop the qupX_ prefix. Let's go ahead and rename qup2_uart17 to uart17. Note that some nodes are moved in the file by this patch to preserve the expected sort order in the file. Signed-off-by: Brian Masney <bmasney@xxxxxxxxxx> Link: https://lore.kernel.org/lkml/20221212182314.1902632-1-bmasney@xxxxxxxxxx/ Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Reviewed-by: Johan Hovold <johan+linaro@xxxxxxxxxx> --- No changes in v4 arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 12 ++++++------ arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 12 ++++++------ arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 14 +++++++------- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +- 4 files changed, 20 insertions(+), 20 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index 84cb6f3eeb56..61f2e44e70c1 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -17,7 +17,7 @@ / { compatible = "qcom,sa8295p-adp", "qcom,sa8540p"; aliases { - serial0 = &qup2_uart17; + serial0 = &uart17; }; chosen { @@ -240,11 +240,6 @@ &qup2 { status = "okay"; }; -&qup2_uart17 { - compatible = "qcom,geni-debug-uart"; - status = "okay"; -}; - &remoteproc_adsp { firmware-name = "qcom/sa8540p/adsp.mbn"; status = "okay"; @@ -338,6 +333,11 @@ pm8450g_gpios: gpio@c000 { }; }; +&uart17 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + &ufs_mem_hc { reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts index d70859803fbd..d19af74f5057 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -17,7 +17,7 @@ / { compatible = "qcom,sa8540p-ride", "qcom,sa8540p"; aliases { - serial0 = &qup2_uart17; + serial0 = &uart17; }; chosen { @@ -192,11 +192,6 @@ &qup2 { status = "okay"; }; -&qup2_uart17 { - compatible = "qcom,geni-debug-uart"; - status = "okay"; -}; - &remoteproc_nsp0 { firmware-name = "qcom/sa8540p/cdsp.mbn"; status = "okay"; @@ -207,6 +202,11 @@ &remoteproc_nsp1 { status = "okay"; }; +&uart17 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + &ufs_mem_hc { reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 551768f97729..db273face248 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -17,7 +17,7 @@ / { compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp"; aliases { - serial0 = &qup2_uart17; + serial0 = &uart17; }; backlight { @@ -363,12 +363,6 @@ keyboard@68 { }; }; -&qup2_uart17 { - compatible = "qcom,geni-debug-uart"; - - status = "okay"; -}; - &remoteproc_adsp { firmware-name = "qcom/sc8280xp/qcadsp8280.mbn"; @@ -381,6 +375,12 @@ &remoteproc_nsp0 { status = "okay"; }; +&uart17 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + &ufs_mem_hc { reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index c0ffca9c9ddb..b8f567642551 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -813,7 +813,7 @@ qup2: geniqup@8c0000 { status = "disabled"; - qup2_uart17: serial@884000 { + uart17: serial@884000 { compatible = "qcom,geni-uart"; reg = <0 0x00884000 0 0x4000>; clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; -- 2.39.0
