From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx> Add bindings for the Richtek RT9467 battery charger. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Co-developed-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx> Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx> Signed-off-by: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx> --- .../power/supply/richtek,rt9467-charger.yaml | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml new file mode 100644 index 000000000000..92c570643d2c --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/richtek,rt9467-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT9467 Switching Battery Charger with Power Path Management + +maintainers: + - ChiYuan Huang <cy_huang@xxxxxxxxxxx> + - ChiaEn Wu <chiaen_wu@xxxxxxxxxxx> + +description: | + RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for + portable applications. It integrates a synchronous PWM controller, power + MOSFETs, input current sensing and regulation, high-accuracy voltage + regulation, and charge termination. The charge current is regulated through + integrated sensing resistors. + + The RT9467 also features USB On-The-Go (OTG) support. It also integrates + D+/D- pin for USB host/charging port detection. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT9467/DS9467-01.pdf + +properties: + compatible: + const: richtek,rt9467-charger + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + charge-enable-gpios: + description: GPIO is used to turn on and off charging. + maxItems: 1 + + usb-otg-vbus-regulator: + type: object + description: OTG boost regulator. + unevaluatedProperties: false + $ref: /schemas/regulator/regulator.yaml# + + properties: + enable-gpios: true + +required: + - compatible + - reg + - wakeup-source + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + charger@5b { + compatible = "richtek,rt9467-charger"; + reg = <0x5b>; + wakeup-source; + interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>; + charge-enable-gpios = <&gpio26 1 GPIO_ACTIVE_LOW>; + + rt9467_otg_vbus: usb-otg-vbus-regulator { + regulator-name = "rt9467-usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; + }; + }; + }; -- 2.25.1
