[PATCH v1 3/4] riscv: dts: starfive: jh7110: Add temperature sensor node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Emil Renner Berthing <kernel@xxxxxxxx>

Add temperature sensor support for StarFive JH7110 SoC.

Signed-off-by: Emil Renner Berthing <kernel@xxxxxxxx>
Signed-off-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 64d260ea1f29..793ae26bf72d 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -353,6 +353,19 @@ uart5: serial@12020000 {
 			status = "disabled";
 		};
 
+		sfctemp: tmon@120e0000  {
+			compatible = "starfive,jh7110-temp";
+			reg = <0x0 0x120e0000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_TEMP_CORE>,
+				 <&syscrg JH7110_SYSCLK_TEMP_APB>;
+			clock-names = "sense", "bus";
+			resets = <&syscrg JH7110_SYSRST_TEMP_CORE>,
+				 <&syscrg JH7110_SYSRST_TEMP_APB>;
+			reset-names = "sense", "bus";
+			interrupts = <81>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		syscrg: clock-controller@13020000 {
 			compatible = "starfive,jh7110-syscrg";
 			reg = <0x0 0x13020000 0x0 0x10000>;
-- 
2.38.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux