The probe already stores pointer to &pdev->dev, so use it to make the
code a bit easier to read.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
sound/soc/codecs/wsa881x.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c
index 6c8b1db649b8..cd7be55f6a89 100644
--- a/sound/soc/codecs/wsa881x.c
+++ b/sound/soc/codecs/wsa881x.c
@@ -1113,20 +1113,20 @@ static int wsa881x_probe(struct sdw_slave *pdev,
struct wsa881x_priv *wsa881x;
struct device *dev = &pdev->dev;
- wsa881x = devm_kzalloc(&pdev->dev, sizeof(*wsa881x), GFP_KERNEL);
+ wsa881x = devm_kzalloc(dev, sizeof(*wsa881x), GFP_KERNEL);
if (!wsa881x)
return -ENOMEM;
- wsa881x->sd_n = devm_gpiod_get_optional(&pdev->dev, "powerdown",
+ wsa881x->sd_n = devm_gpiod_get_optional(dev, "powerdown",
GPIOD_FLAGS_BIT_NONEXCLUSIVE);
if (IS_ERR(wsa881x->sd_n)) {
dev_err(&pdev->dev, "Shutdown Control GPIO not found\n");
return PTR_ERR(wsa881x->sd_n);
}
- dev_set_drvdata(&pdev->dev, wsa881x);
+ dev_set_drvdata(dev, wsa881x);
wsa881x->slave = pdev;
- wsa881x->dev = &pdev->dev;
+ wsa881x->dev = dev;
wsa881x->sconfig.ch_count = 1;
wsa881x->sconfig.bps = 1;
wsa881x->sconfig.frame_rate = 48000;
@@ -1149,7 +1149,7 @@ static int wsa881x_probe(struct sdw_slave *pdev,
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
- return devm_snd_soc_register_component(&pdev->dev,
+ return devm_snd_soc_register_component(dev,
&wsa881x_component_drv,
wsa881x_dais,
ARRAY_SIZE(wsa881x_dais));
--
2.34.1
