[PATCH v2 07/17] arm64: dts: qcom: sm8150: Pad addresses to 8 hex digits

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/sm8150.dtsi | 68 ++++++++++++++--------------
 1 file changed, 34 insertions(+), 34 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 73f39bbeab13..f6b16c31e8b0 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -890,7 +890,7 @@ gcc: clock-controller@100000 {
 
 		gpi_dma0: dma-controller@800000 {
 			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
-			reg = <0 0x800000 0 0x60000>;
+			reg = <0 0x00800000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
@@ -979,7 +979,7 @@ i2c0: i2c@880000 {
 
 			spi0: spi@880000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x880000 0 0x4000>;
+				reg = <0 0x00880000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
@@ -1013,7 +1013,7 @@ i2c1: i2c@884000 {
 
 			spi1: spi@884000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x884000 0 0x4000>;
+				reg = <0 0x00884000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
@@ -1047,7 +1047,7 @@ i2c2: i2c@888000 {
 
 			spi2: spi@888000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x888000 0 0x4000>;
+				reg = <0 0x00888000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
@@ -1081,7 +1081,7 @@ i2c3: i2c@88c000 {
 
 			spi3: spi@88c000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x88c000 0 0x4000>;
+				reg = <0 0x0088c000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
@@ -1115,7 +1115,7 @@ i2c4: i2c@890000 {
 
 			spi4: spi@890000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x890000 0 0x4000>;
+				reg = <0 0x00890000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
@@ -1149,7 +1149,7 @@ i2c5: i2c@894000 {
 
 			spi5: spi@894000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x894000 0 0x4000>;
+				reg = <0 0x00894000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
@@ -1183,7 +1183,7 @@ i2c6: i2c@898000 {
 
 			spi6: spi@898000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x898000 0 0x4000>;
+				reg = <0 0x00898000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
@@ -1217,7 +1217,7 @@ i2c7: i2c@89c000 {
 
 			spi7: spi@89c000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0x89c000 0 0x4000>;
+				reg = <0 0x0089c000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
@@ -1236,7 +1236,7 @@ spi7: spi@89c000 {
 
 		gpi_dma1: dma-controller@a00000 {
 			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
-			reg = <0 0xa00000 0 0x60000>;
+			reg = <0 0x00a00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
@@ -1287,7 +1287,7 @@ i2c8: i2c@a80000 {
 
 			spi8: spi@a80000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xa80000 0 0x4000>;
+				reg = <0 0x00a80000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
@@ -1321,7 +1321,7 @@ i2c9: i2c@a84000 {
 
 			spi9: spi@a84000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xa84000 0 0x4000>;
+				reg = <0 0x00a84000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
@@ -1355,7 +1355,7 @@ i2c10: i2c@a88000 {
 
 			spi10: spi@a88000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xa88000 0 0x4000>;
+				reg = <0 0x00a88000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
@@ -1389,7 +1389,7 @@ i2c11: i2c@a8c000 {
 
 			spi11: spi@a8c000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xa8c000 0 0x4000>;
+				reg = <0 0x00a8c000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
@@ -1432,7 +1432,7 @@ i2c12: i2c@a90000 {
 
 			spi12: spi@a90000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xa90000 0 0x4000>;
+				reg = <0 0x00a90000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
@@ -1450,7 +1450,7 @@ spi12: spi@a90000 {
 
 			i2c16: i2c@94000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0 0x0094000 0 0x4000>;
+				reg = <0 0x00094000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
@@ -1466,7 +1466,7 @@ i2c16: i2c@94000 {
 
 			spi16: spi@a94000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xa94000 0 0x4000>;
+				reg = <0 0x00a94000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
@@ -1485,7 +1485,7 @@ spi16: spi@a94000 {
 
 		gpi_dma2: dma-controller@c00000 {
 			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
-			reg = <0 0xc00000 0 0x60000>;
+			reg = <0 0x00c00000 0 0x60000>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
@@ -1537,7 +1537,7 @@ i2c17: i2c@c80000 {
 
 			spi17: spi@c80000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xc80000 0 0x4000>;
+				reg = <0 0x00c80000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
@@ -1571,7 +1571,7 @@ i2c18: i2c@c84000 {
 
 			spi18: spi@c84000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xc84000 0 0x4000>;
+				reg = <0 0x00c84000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
@@ -1605,7 +1605,7 @@ i2c19: i2c@c88000 {
 
 			spi19: spi@c88000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xc88000 0 0x4000>;
+				reg = <0 0x00c88000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
@@ -1639,7 +1639,7 @@ i2c13: i2c@c8c000 {
 
 			spi13: spi@c8c000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xc8c000 0 0x4000>;
+				reg = <0 0x00c8c000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
@@ -1673,7 +1673,7 @@ i2c14: i2c@c90000 {
 
 			spi14: spi@c90000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xc90000 0 0x4000>;
+				reg = <0 0x00c90000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
@@ -1707,7 +1707,7 @@ i2c15: i2c@c94000 {
 
 			spi15: spi@c94000 {
 				compatible = "qcom,geni-spi";
-				reg = <0 0xc94000 0 0x4000>;
+				reg = <0 0x00c94000 0 0x4000>;
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
@@ -1864,10 +1864,10 @@ pcie0_phy: phy@1c06000 {
 			status = "disabled";
 
 			pcie0_lane: phy@1c06200 {
-				reg = <0 0x1c06200 0 0x170>, /* tx */
-				      <0 0x1c06400 0 0x200>, /* rx */
-				      <0 0x1c06800 0 0x1f0>, /* pcs */
-				      <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
+				reg = <0 0x01c06200 0 0x170>, /* tx */
+				      <0 0x01c06400 0 0x200>, /* rx */
+				      <0 0x01c06800 0 0x1f0>, /* pcs */
+				      <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
 				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 				clock-names = "pipe0";
 
@@ -1963,12 +1963,12 @@ pcie1_phy: phy@1c0e000 {
 			status = "disabled";
 
 			pcie1_lane: phy@1c0e200 {
-				reg = <0 0x1c0e200 0 0x170>, /* tx0 */
-				      <0 0x1c0e400 0 0x200>, /* rx0 */
-				      <0 0x1c0ea00 0 0x1f0>, /* pcs */
-				      <0 0x1c0e600 0 0x170>, /* tx1 */
-				      <0 0x1c0e800 0 0x200>, /* rx1 */
-				      <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+				reg = <0 0x01c0e200 0 0x170>, /* tx0 */
+				      <0 0x01c0e400 0 0x200>, /* rx0 */
+				      <0 0x01c0ea00 0 0x1f0>, /* pcs */
+				      <0 0x01c0e600 0 0x170>, /* tx1 */
+				      <0 0x01c0e800 0 0x200>, /* rx1 */
+				      <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
 				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
 				clock-names = "pipe0";
 
-- 
2.39.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux