[PATCH v2 15/17] arm64: dts: qcom: sm8450: Pad addresses to 8 hex digits

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/sm8450.dtsi | 48 ++++++++++++++--------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 2194bbac8ee0..bca859cde31c 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -743,7 +743,7 @@ gcc: clock-controller@100000 {
 		gpi_dma2: dma-controller@800000 {
 			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
-			reg = <0 0x800000 0 0x60000>;
+			reg = <0 0x00800000 0 0x60000>;
 			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
@@ -1064,7 +1064,7 @@ spi21: spi@898000 {
 		gpi_dma0: dma-controller@900000 {
 			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
-			reg = <0 0x900000 0 0x60000>;
+			reg = <0 0x00900000 0 0x60000>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
@@ -1345,7 +1345,7 @@ spi5: spi@994000 {
 
 			i2c6: i2c@998000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0x0 0x998000 0x0 0x4000>;
+				reg = <0x0 0x00998000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
 				pinctrl-names = "default";
@@ -1365,7 +1365,7 @@ i2c6: i2c@998000 {
 
 			spi6: spi@998000 {
 				compatible = "qcom,geni-spi";
-				reg = <0x0 0x998000 0x0 0x4000>;
+				reg = <0x0 0x00998000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
@@ -1400,7 +1400,7 @@ uart7: serial@99c000 {
 		gpi_dma1: dma-controller@a00000 {
 			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
-			reg = <0 0xa00000 0 0x60000>;
+			reg = <0 0x00a00000 0 0x60000>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
@@ -1810,10 +1810,10 @@ pcie0_phy: phy@1c06000 {
 			status = "disabled";
 
 			pcie0_lane: phy@1c06200 {
-				reg = <0 0x1c06e00 0 0x200>, /* tx */
-				      <0 0x1c07000 0 0x200>, /* rx */
-				      <0 0x1c06200 0 0x200>, /* pcs */
-				      <0 0x1c06600 0 0x200>; /* pcs_pcie */
+				reg = <0 0x01c06e00 0 0x200>, /* tx */
+				      <0 0x01c07000 0 0x200>, /* rx */
+				      <0 0x01c06200 0 0x200>, /* pcs */
+				      <0 0x01c06600 0 0x200>; /* pcs_pcie */
 				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 				clock-names = "pipe0";
 
@@ -1917,12 +1917,12 @@ pcie1_phy: phy@1c0f000 {
 			status = "disabled";
 
 			pcie1_lane: phy@1c0e000 {
-				reg = <0 0x1c0e000 0 0x200>, /* tx */
-				      <0 0x1c0e200 0 0x300>, /* rx */
-				      <0 0x1c0f200 0 0x200>, /* pcs */
-				      <0 0x1c0e800 0 0x200>, /* tx */
-				      <0 0x1c0ea00 0 0x300>, /* rx */
-				      <0 0x1c0f400 0 0xc00>; /* pcs_pcie */
+				reg = <0 0x01c0e000 0 0x200>, /* tx */
+				      <0 0x01c0e200 0 0x300>, /* rx */
+				      <0 0x01c0f200 0 0x200>, /* pcs */
+				      <0 0x01c0e800 0 0x200>, /* tx */
+				      <0 0x01c0ea00 0 0x300>, /* rx */
+				      <0 0x01c0f400 0 0xc00>; /* pcs_pcie */
 				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
 				clock-names = "pipe0";
 
@@ -2147,7 +2147,7 @@ swr4: soundwire-controller@31f0000 {
 
 		rxmacro: codec@3200000 {
 			compatible = "qcom,sm8450-lpass-rx-macro";
-			reg = <0 0x3200000 0 0x1000>;
+			reg = <0 0x03200000 0 0x1000>;
 			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
@@ -2168,7 +2168,7 @@ rxmacro: codec@3200000 {
 
 		swr1: soundwire-controller@3210000 {
 			compatible = "qcom,soundwire-v1.7.0";
-			reg = <0 0x3210000 0 0x2000>;
+			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rxmacro>;
 			clock-names = "iface";
@@ -2193,7 +2193,7 @@ swr1: soundwire-controller@3210000 {
 
 		txmacro: codec@3220000 {
 			compatible = "qcom,sm8450-lpass-tx-macro";
-			reg = <0 0x3220000 0 0x1000>;
+			reg = <0 0x03220000 0 0x1000>;
 			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
@@ -2260,7 +2260,7 @@ swr0: soundwire-controller@3250000 {
 
 		swr2: soundwire-controller@33b0000 {
 			compatible = "qcom,soundwire-v1.7.0";
-			reg = <0 0x33b0000 0 0x2000>;
+			reg = <0 0x033b0000 0 0x2000>;
 			interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wake";
@@ -2555,7 +2555,7 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
 
 		cci0: cci@ac15000 {
 			compatible = "qcom,sm8450-cci", "qcom,msm8996-cci";
-			reg = <0 0xac15000 0 0x1000>;
+			reg = <0 0x0ac15000 0 0x1000>;
 			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
 			power-domains = <&camcc TITAN_TOP_GDSC>;
 
@@ -2594,7 +2594,7 @@ cci0_i2c1: i2c-bus@1 {
 
 		cci1: cci@ac16000 {
 			compatible = "qcom,sm8450-cci", "qcom,msm8996-cci";
-			reg = <0 0xac16000 0 0x1000>;
+			reg = <0 0x0ac16000 0 0x1000>;
 			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
 			power-domains = <&camcc TITAN_TOP_GDSC>;
 
@@ -3259,8 +3259,8 @@ qup_uart20_default: qup-uart20-default-state {
 
 		lpass_tlmm: pinctrl@3440000{
 			compatible = "qcom,sm8450-lpass-lpi-pinctrl";
-			reg = <0 0x3440000 0x0 0x20000>,
-			      <0 0x34d0000 0x0 0x10000>;
+			reg = <0 0x03440000 0x0 0x20000>,
+			      <0 0x034d0000 0x0 0x10000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&lpass_tlmm 0 0 23>;
@@ -3847,7 +3847,7 @@ nsp_noc: interconnect@320c0000 {
 
 		lpass_ag_noc: interconnect@3c40000 {
 			compatible = "qcom,sm8450-lpass-ag-noc";
-			reg = <0 0x3c40000 0 0x17200>;
+			reg = <0 0x03c40000 0 0x17200>;
 			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
-- 
2.39.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux