Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
v1 -> v2:
No changes
arch/arm64/boot/dts/qcom/sm8250.dtsi | 54 ++++++++++++++--------------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 0b6a6a809503..a642ff1af094 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1899,10 +1899,10 @@ pcie0_phy: phy@1c06000 {
status = "disabled";
pcie0_lane: phy@1c06200 {
- reg = <0 0x1c06200 0 0x170>, /* tx */
- <0 0x1c06400 0 0x200>, /* rx */
- <0 0x1c06800 0 0x1f0>, /* pcs */
- <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
+ reg = <0 0x01c06200 0 0x170>, /* tx */
+ <0 0x01c06400 0 0x200>, /* rx */
+ <0 0x01c06800 0 0x1f0>, /* pcs */
+ <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
clock-names = "pipe0";
@@ -2005,12 +2005,12 @@ pcie1_phy: phy@1c0e000 {
status = "disabled";
pcie1_lane: phy@1c0e200 {
- reg = <0 0x1c0e200 0 0x170>, /* tx0 */
- <0 0x1c0e400 0 0x200>, /* rx0 */
- <0 0x1c0ea00 0 0x1f0>, /* pcs */
- <0 0x1c0e600 0 0x170>, /* tx1 */
- <0 0x1c0e800 0 0x200>, /* rx1 */
- <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+ reg = <0 0x01c0e200 0 0x170>, /* tx0 */
+ <0 0x01c0e400 0 0x200>, /* rx0 */
+ <0 0x01c0ea00 0 0x1f0>, /* pcs */
+ <0 0x01c0e600 0 0x170>, /* tx1 */
+ <0 0x01c0e800 0 0x200>, /* rx1 */
+ <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
clock-names = "pipe0";
@@ -2094,7 +2094,7 @@ pcie2: pci@1c10000 {
pcie2_phy: phy@1c16000 {
compatible = "qcom,sm8250-qmp-modem-pcie-phy";
- reg = <0 0x1c16000 0 0x1c0>;
+ reg = <0 0x01c16000 0 0x1c0>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
@@ -2113,12 +2113,12 @@ pcie2_phy: phy@1c16000 {
status = "disabled";
pcie2_lane: phy@1c16200 {
- reg = <0 0x1c16200 0 0x170>, /* tx0 */
- <0 0x1c16400 0 0x200>, /* rx0 */
- <0 0x1c16a00 0 0x1f0>, /* pcs */
- <0 0x1c16600 0 0x170>, /* tx1 */
- <0 0x1c16800 0 0x200>, /* rx1 */
- <0 0x1c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+ reg = <0 0x01c16200 0 0x170>, /* tx0 */
+ <0 0x01c16400 0 0x200>, /* rx0 */
+ <0 0x01c16a00 0 0x1f0>, /* pcs */
+ <0 0x01c16600 0 0x170>, /* tx1 */
+ <0 0x01c16800 0 0x200>, /* rx1 */
+ <0 0x01c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
clock-names = "pipe0";
@@ -3792,16 +3792,16 @@ camss: camss@ac6a000 {
compatible = "qcom,sm8250-camss";
status = "disabled";
- reg = <0 0xac6a000 0 0x2000>,
- <0 0xac6c000 0 0x2000>,
- <0 0xac6e000 0 0x1000>,
- <0 0xac70000 0 0x1000>,
- <0 0xac72000 0 0x1000>,
- <0 0xac74000 0 0x1000>,
- <0 0xacb4000 0 0xd000>,
- <0 0xacc3000 0 0xd000>,
- <0 0xacd9000 0 0x2200>,
- <0 0xacdb200 0 0x2200>;
+ reg = <0 0x0ac6a000 0 0x2000>,
+ <0 0x0ac6c000 0 0x2000>,
+ <0 0x0ac6e000 0 0x1000>,
+ <0 0x0ac70000 0 0x1000>,
+ <0 0x0ac72000 0 0x1000>,
+ <0 0x0ac74000 0 0x1000>,
+ <0 0x0acb4000 0 0xd000>,
+ <0 0x0acc3000 0 0xd000>,
+ <0 0x0acd9000 0 0x2200>,
+ <0 0x0acdb200 0 0x2200>;
reg-names = "csiphy0",
"csiphy1",
"csiphy2",
--
2.39.0
