[PATCH v2 02/17] arm64: dts: qcom: ipq6018: Fix up indentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The dwc3 subnode was indented using spaces for some reason and other
properties were not exactly properly indented. Fix it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
v1 -> v2:
- Squash with a similar indent-fixing patch [4/18]

 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 44 +++++++++++++--------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 6f12c1a8f90f..d1c02efc2ea9 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -201,8 +201,8 @@ crypto: crypto@73a000 {
 			compatible = "qcom,crypto-v5.1";
 			reg = <0x0 0x0073a000 0x0 0x6000>;
 			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
-				<&gcc GCC_CRYPTO_AXI_CLK>,
-				<&gcc GCC_CRYPTO_CLK>;
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
 			clock-names = "iface", "bus", "core";
 			dmas = <&cryptobam 2>, <&cryptobam 3>;
 			dma-names = "rx", "tx";
@@ -272,7 +272,7 @@ blsp1_uart3: serial@78b1000 {
 			reg = <0x0 0x078b1000 0x0 0x200>;
 			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
-				<&gcc GCC_BLSP1_AHB_CLK>;
+				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			status = "disabled";
 		};
@@ -285,7 +285,7 @@ blsp1_spi1: spi@78b5000 {
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			spi-max-frequency = <50000000>;
 			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
-				<&gcc GCC_BLSP1_AHB_CLK>;
+				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
 			dma-names = "tx", "rx";
@@ -300,7 +300,7 @@ blsp1_spi2: spi@78b6000 {
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			spi-max-frequency = <50000000>;
 			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
-				<&gcc GCC_BLSP1_AHB_CLK>;
+				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
 			dma-names = "tx", "rx";
@@ -358,8 +358,8 @@ qpic_nand: nand-controller@79b0000 {
 			clock-names = "core", "aon";
 
 			dmas = <&qpic_bam 0>,
-				<&qpic_bam 1>,
-				<&qpic_bam 2>;
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
 			dma-names = "tx", "rx", "cmd";
 			pinctrl-0 = <&qpic_pins>;
 			pinctrl-names = "default";
@@ -372,10 +372,10 @@ intc: interrupt-controller@b000000 {
 			#size-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <0x3>;
-			reg =   <0x0 0x0b000000 0x0 0x1000>,  /*GICD*/
-				<0x0 0x0b002000 0x0 0x1000>,  /*GICC*/
-				<0x0 0x0b001000 0x0 0x1000>,  /*GICH*/
-				<0x0 0x0b004000 0x0 0x1000>;  /*GICV*/
+			reg = <0x0 0x0b000000 0x0 0x1000>,  /*GICD*/
+			      <0x0 0x0b002000 0x0 0x1000>,  /*GICC*/
+			      <0x0 0x0b001000 0x0 0x1000>,  /*GICH*/
+			      <0x0 0x0b004000 0x0 0x1000>;  /*GICV*/
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			ranges = <0 0 0 0xb00a000 0 0xffd>;
 
@@ -663,17 +663,17 @@ usb2: usb@70f8800 {
 			status = "disabled";
 
 			dwc_1: usb@7000000 {
-			       compatible = "snps,dwc3";
-			       reg = <0x0 0x07000000 0x0 0xcd00>;
-			       interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			       phys = <&qusb_phy_1>;
-			       phy-names = "usb2-phy";
-			       tx-fifo-resize;
-			       snps,is-utmi-l1-suspend;
-			       snps,hird-threshold = /bits/ 8 <0x0>;
-			       snps,dis_u2_susphy_quirk;
-			       snps,dis_u3_susphy_quirk;
-			       dr_mode = "host";
+				compatible = "snps,dwc3";
+				reg = <0x0 0x07000000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_1>;
+				phy-names = "usb2-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
 			};
 		};
 
-- 
2.39.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux