On Tue, Nov 22, 2022 at 04:54:33PM +0100, Philippe Schenker wrote: > From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx> > > > This patchset intends to disable the USB Over Current for Toradex i.MX > boards using the USB chipidea driver. > > We do this on the Carrier-Board device-trees due to the reason, that if > a customer of us inheriting the module-level device-tree (named -.dtsi) > does not inherit settings from us that may be incorrect for his > use-case. > > > Philippe Schenker (5): > ARM: dts: apalis-imx6: Disable usb over-current > ARM: dts: colibri-imx6: Disable usb over-current > ARM: dts: colibri-imx6ull: Disable usb over-current > ARM: dts: colibri-imx7: Disable usb over-current > arm64: dts: verdin-imx8mm: Disable usb over-current Applied all, thanks!