[PATCH v4 06/11] arm64: dts: qcom: sm8350: Add &tlmm gpio-line-names

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add GPIO line names as described by the sm8350-hdk schematic.

Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 205 ++++++++++++++++++++++++
 1 file changed, 205 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 0fcf5bd88fc7..e6deb08c6da0 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -233,6 +233,211 @@ &slpi {
 
 &tlmm {
 	gpio-reserved-ranges = <52 8>;
+
+	gpio-line-names =
+		"APPS_I2C_SDA", /* GPIO_0 */
+		"APPS_I2C_SCL",
+		"FSA_INT_N",
+		"USER_LED3_EN",
+		"SMBUS_SDA_1P8",
+		"SMBUS_SCL_1P8",
+		"2M2_3P3_EN",
+		"ALERT_DUAL_M2_N",
+		"EXP_UART_CTS",
+		"EXP_UART_RFR",
+		"EXP_UART_TX", /* GPIO_10 */
+		"EXP_UART_RX",
+		"NC",
+		"NC",
+		"RCM_MARKER1",
+		"WSA0_EN",
+		"CAM1_RESET_N",
+		"CAM0_RESET_N",
+		"DEBUG_UART_TX",
+		"DEBUG_UART_RX",
+		"TS_I2C_SDA", /* GPIO_20 */
+		"TS_I2C_SCL",
+		"TS_RESET_N",
+		"TS_INT_N",
+		"DISP0_RESET_N",
+		"DISP1_RESET_N",
+		"ETH_RESET",
+		"RCM_MARKER2",
+		"CAM_DC_MIPI_MUX_EN",
+		"CAM_DC_MIPI_MUX_SEL",
+		"AFC_PHY_TA_D_PLUS", /* GPIO_30 */
+		"AFC_PHY_TA_D_MINUS",
+		"PM8008_1_IRQ",
+		"PM8008_1_RESET_N",
+		"PM8008_2_IRQ",
+		"PM8008_2_RESET_N",
+		"CAM_DC_I3C_SDA",
+		"CAM_DC_I3C_SCL",
+		"FP_INT_N",
+		"FP_WUHB_INT_N",
+		"SMB_SPMI_DATA", /* GPIO_40 */
+		"SMB_SPMI_CLK",
+		"USB_HUB_RESET",
+		"FORCE_USB_BOOT",
+		"LRF_IRQ",
+		"NC",
+		"IMU2_INT",
+		"HDMI_3P3_EN",
+		"HDMI_RSTN",
+		"HDMI_1P2_EN",
+		"HDMI_INT", /* GPIO_50 */
+		"USB1_ID",
+		"FP_SPI_MISO",
+		"FP_SPI_MOSI",
+		"FP_SPI_CLK",
+		"FP_SPI_CS_N",
+		"NFC_ESE_SPI_MISO",
+		"NFC_ESE_SPI_MOSI",
+		"NFC_ESE_SPI_CLK",
+		"NFC_ESE_SPI_CS",
+		"NFC_I2C_SDA", /* GPIO_60 */
+		"NFC_I2C_SCLC",
+		"NFC_EN",
+		"NFC_CLK_REQ",
+		"HST_WLAN_EN",
+		"HST_BT_EN",
+		"HST_SW_CTRL",
+		"NC",
+		"HST_BT_UART_CTS",
+		"HST_BT_UART_RFR",
+		"HST_BT_UART_TX", /* GPIO_70 */
+		"HST_BT_UART_RX",
+		"CAM_DC_SPI0_MISO",
+		"CAM_DC_SPI0_MOSI",
+		"CAM_DC_SPI0_CLK",
+		"CAM_DC_SPI0_CS_N",
+		"CAM_DC_SPI1_MISO",
+		"CAM_DC_SPI1_MOSI",
+		"CAM_DC_SPI1_CLK",
+		"CAM_DC_SPI1_CS_N",
+		"HALL_INT_N", /* GPIO_80 */
+		"USB_PHY_PS",
+		"MDP_VSYNC_P",
+		"MDP_VSYNC_S",
+		"ETH_3P3_EN",
+		"RADAR_INT",
+		"NFC_DWL_REQ",
+		"SM_GPIO_87",
+		"WCD_RESET_N",
+		"ALSP_INT_N",
+		"PRESS_INT", /* GPIO_90 */
+		"SAR_INT_N",
+		"SD_CARD_DET_N",
+		"NC",
+		"PCIE0_RESET_N",
+		"PCIE0_CLK_REQ_N",
+		"PCIE0_WAKE_N",
+		"PCIE1_RESET_N",
+		"PCIE1_CLK_REQ_N",
+		"PCIE1_WAKE_N",
+		"CAM_MCLK0", /* GPIO_100 */
+		"CAM_MCLK1",
+		"CAM_MCLK2",
+		"CAM_MCLK3",
+		"CAM_MCLK4",
+		"CAM_MCLK5",
+		"CAM2_RESET_N",
+		"CCI_I2C0_SDA",
+		"CCI_I2C0_SCL",
+		"CCI_I2C1_SDA",
+		"CCI_I2C1_SCL", /* GPIO_110 */
+		"CCI_I2C2_SDA",
+		"CCI_I2C2_SCL",
+		"CCI_I2C3_SDA",
+		"CCI_I2C3_SCL",
+		"CAM5_RESET_N",
+		"CAM4_RESET_N",
+		"CAM3_RESET_N",
+		"IMU1_INT",
+		"MAG_INT_N",
+		"MI2S2_I2S_SCK", /* GPIO_120 */
+		"MI2S2_I2S_DAT0",
+		"MI2S2_I2S_WS",
+		"HIFI_DAC_I2S_MCLK",
+		"MI2S2_I2S_DAT1",
+		"HIFI_DAC_I2S_SCK",
+		"HIFI_DAC_I2S_DAT0",
+		"NC",
+		"HIFI_DAC_I2S_WS",
+		"HST_BT_WLAN_SLIMBUS_CLK",
+		"HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+		"BT_LED_EN",
+		"WLAN_LED_EN",
+		"NC",
+		"NC",
+		"NC",
+		"UIM2_PRESENT",
+		"NC",
+		"NC",
+		"NC",
+		"UIM1_PRESENT", /* GPIO_140 */
+		"NC",
+		"SM_RFFE0_DATA",
+		"NC",
+		"SM_RFFE1_DATA",
+		"SM_MSS_GRFC4",
+		"SM_MSS_GRFC5",
+		"SM_MSS_GRFC6",
+		"SM_MSS_GRFC7",
+		"SM_RFFE4_CLK",
+		"SM_RFFE4_DATA", /* GPIO_150 */
+		"WLAN_COEX_UART1_RX",
+		"WLAN_COEX_UART1_TX",
+		"HST_SW_CTRL",
+		"DSI0_STATUS",
+		"DSI1_STATUS",
+		"APPS_PBL_BOOT_SPEED_1",
+		"APPS_BOOT_FROM_ROM",
+		"APPS_PBL_BOOT_SPEED_0",
+		"QLINK0_REQ",
+		"QLINK0_EN", /* GPIO_160 */
+		"QLINK0_WMSS_RESET_N",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"WCD_SWR_TX_CLK",
+		"WCD_SWR_TX_DATA0",
+		"WCD_SWR_TX_DATA1", /* GPIO_170 */
+		"WCD_SWR_RX_CLK",
+		"WCD_SWR_RX_DATA0",
+		"WCD_SWR_RX_DATA1",
+		"DMIC01_CLK",
+		"DMIC01_DATA",
+		"DMIC23_CLK",
+		"DMIC23_DATA",
+		"WSA_SWR_CLK",
+		"WSA_SWR_DATA",
+		"DMIC45_CLK", /* GPIO_180 */
+		"DMIC45_DATA",
+		"WCD_SWR_TX_DATA2",
+		"SENSOR_I3C_SDA",
+		"SENSOR_I3C_SCL",
+		"CAM_OIS0_I3C_SDA",
+		"CAM_OIS0_I3C_SCL",
+		"IMU_SPI_MISO",
+		"IMU_SPI_MOSI",
+		"IMU_SPI_CLK",
+		"IMU_SPI_CS_N", /* GPIO_190 */
+		"MAG_I2C_SDA",
+		"MAG_I2C_SCL",
+		"SENSOR_I2C_SDA",
+		"SENSOR_I2C_SCL",
+		"RADAR_SPI_MISO",
+		"RADAR_SPI_MOSI",
+		"RADAR_SPI_CLK",
+		"RADAR_SPI_CS_N",
+		"HST_BLE_UART_TX",
+		"HST_BLE_UART_RX", /* GPIO_200 */
+		"HST_WLAN_UART_TX",
+		"HST_WLAN_UART_RX";
 };
 
 &uart2 {
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux