On Wed, Dec 07, 2022 at 06:37:14PM +0100, Saravanan Sekar wrote: > Document mpq7932 power-management IC > > Signed-off-by: Saravanan Sekar <saravanan@xxxxxxxxxxx> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Since this is in the regulator subsystem domain, I can not apply the patch through hwmon without Acked-by: or Reviewed-by: from a regulator maintainer. Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx> assuming that it will be applied through the regulator subsystem. Turns out you did not actually copy a a regulator subsystem maintainer or the regulator mailing list, so you'll have to re-send this patch for inclusion there. Guenter > --- > .../bindings/regulator/mps,mpq7932.yaml | 68 +++++++++++++++++++ > 1 file changed, 68 insertions(+) > create mode 100644 Documentation/devicetree/bindings/regulator/mps,mpq7932.yaml > > diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7932.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7932.yaml > new file mode 100644 > index 000000000000..2185cd011c46 > --- /dev/null > +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7932.yaml > @@ -0,0 +1,68 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/regulator/mps,mpq7932.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Monolithic Power System MPQ7932 PMIC > + > +maintainers: > + - Saravanan Sekar <saravanan@xxxxxxxxxxx> > + > +properties: > + compatible: > + enum: > + - mps,mpq7932 > + > + reg: > + maxItems: 1 > + > + regulators: > + type: object > + description: | > + list of regulators provided by this controller, must be named > + after their hardware counterparts BUCK[1-6] > + > + patternProperties: > + "^buck[1-6]$": > + type: object > + $ref: regulator.yaml# > + unevaluatedProperties: false > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - regulators > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + pmic@3 { > + compatible = "mps,mpq7932"; > + reg = <0x3>; > + > + regulators { > + buck1 { > + regulator-name = "buck1"; > + regulator-min-microvolt = <1600000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + }; > + > + buck2 { > + regulator-name = "buck2"; > + regulator-min-microvolt = <1700000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + }; > + }; > + }; > + }; > +...