Running 'make dtbs_check' with schema in net/marvell,orion-mdio.yaml gives the following warnings: mdio-bus@72004: Unevaluated properties are not allowed ('ethernet-phy' was unexpected) arch/arm/boot/dts/dove-cubox.dtb arch/arm/boot/dts/dove-cubox-es.dtb arch/arm/boot/dts/dove-d2plug.dtb arch/arm/boot/dts/dove-d2plug.dtb arch/arm/boot/dts/dove-dove-db.dtb arch/arm/boot/dts/dove-d3plug.dtb arch/arm/boot/dts/dove-sbc-a510.dtb Fix them by removing empty ethphy subnode from dove.dtsi and describe PHY on the relevant board .dts files level. Signed-off-by: Michał Grzelak <mig@xxxxxxxxxxxx> --- arch/arm/boot/dts/dove-cm-a510.dtsi | 14 +++++++++++--- arch/arm/boot/dts/dove-cubox.dts | 15 +++++++++++---- arch/arm/boot/dts/dove.dtsi | 5 ----- 3 files changed, 22 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi index 9b9dfbe07be4..2f2f0a4bf004 100644 --- a/arch/arm/boot/dts/dove-cm-a510.dtsi +++ b/arch/arm/boot/dts/dove-cm-a510.dtsi @@ -124,9 +124,17 @@ wifi_power: regulator@1 { }; /* Optional RTL8211D GbE PHY on SMI address 0x03 */ -ðphy { - reg = <3>; - status = "disabled"; +&mdio { + ethphy: ethernet-phy@3 { + reg = <3>; + status = "disabled"; + }; +}; + +ð { + ethernet-port@0 { + phy-handle = <ðphy>; + }; }; &i2c0 { diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 2639b9fe0ab4..170c14d7f5c8 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -72,11 +72,18 @@ gpu-subsystem { &uart0 { status = "okay"; }; &sata0 { status = "okay"; }; &mdio { status = "okay"; }; -ð { status = "okay"; }; +ð { + status = "okay"; + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; -ðphy { - compatible = "marvell,88e1310"; - reg = <1>; +&mdio { + ethphy: ethernet-phy@1 { + compatible = "marvell,88e1310"; + reg = <1>; + }; }; &gpu { diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 00a36fba2fd2..c7a3fa33c56e 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -382,7 +382,6 @@ ethernet-port@0 { interrupts = <29>; /* overwrite MAC address in bootloader */ local-mac-address = [00 00 00 00 00 00]; - phy-handle = <ðphy>; }; }; @@ -394,10 +393,6 @@ mdio: mdio-bus@72004 { interrupts = <30>; clocks = <&gate_clk 2>; status = "disabled"; - - ethphy: ethernet-phy { - /* set phy address in board file */ - }; }; sdio0: sdio-host@92000 { -- 2.34.1