Re: [PATCH] dt-bindings: leds: Convert PCA9532 to dtschema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 28/12/2022 15:04, Wadim Egorov wrote:
> Convert the PCA9532 LED dimmer to dtschema.
> While at it, also update and the the example to match
> recommended node names and the link to the product datasheet.
> 
> Signed-off-by: Wadim Egorov <w.egorov@xxxxxxxxx>
> ---
>  .../devicetree/bindings/leds/leds-pca9532.txt | 49 -----------
>  .../bindings/leds/leds-pca9532.yaml           | 86 +++++++++++++++++++
>  2 files changed, 86 insertions(+), 49 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/leds/leds-pca9532.txt
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-pca9532.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-pca9532.txt b/Documentation/devicetree/bindings/leds/leds-pca9532.txt
> deleted file mode 100644
> index f769c52e3643..000000000000
> --- a/Documentation/devicetree/bindings/leds/leds-pca9532.txt
> +++ /dev/null
> @@ -1,49 +0,0 @@
> -*NXP - pca9532 PWM LED Driver
> -
> -The PCA9532 family is SMBus I/O expander optimized for dimming LEDs.
> -The PWM support 256 steps.
> -
> -Required properties:
> -	- compatible:
> -		"nxp,pca9530"
> -		"nxp,pca9531"
> -		"nxp,pca9532"
> -		"nxp,pca9533"
> -	- reg -  I2C slave address
> -
> -Each led is represented as a sub-node of the nxp,pca9530.
> -
> -Optional sub-node properties:
> -	- label: see Documentation/devicetree/bindings/leds/common.txt
> -	- type: Output configuration, see dt-bindings/leds/leds-pca9532.h (default NONE)
> -	- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
> -	- default-state: see Documentation/devicetree/bindings/leds/common.txt
> -	  This property is only valid for sub-nodes of type <PCA9532_TYPE_LED>.
> -
> -Example:
> -  #include <dt-bindings/leds/leds-pca9532.h>
> -
> -  leds: pca9530@60 {
> -    compatible = "nxp,pca9530";
> -    reg = <0x60>;
> -
> -    red-power {
> -      label = "pca:red:power";
> -      type = <PCA9532_TYPE_LED>;
> -    };
> -    green-power {
> -      label = "pca:green:power";
> -      type = <PCA9532_TYPE_LED>;
> -    };
> -    kernel-booting {
> -      type = <PCA9532_TYPE_LED>;
> -      default-state = "on";
> -    };
> -    sys-stat {
> -      type = <PCA9532_TYPE_LED>;
> -      default-state = "keep"; // don't touch, was set by U-Boot
> -    };
> -  };
> -
> -For more product information please see the link below:
> -http://nxp.com/documents/data_sheet/PCA9532.pdf
> diff --git a/Documentation/devicetree/bindings/leds/leds-pca9532.yaml b/Documentation/devicetree/bindings/leds/leds-pca9532.yaml
> new file mode 100644
> index 000000000000..e3741b5046b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-pca9532.yaml

Filename matching compatibles, so nxp,pca9530.yaml or nxp,pca953x.yaml

> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/leds-pca9532.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP - pca9532 PWM LED Driver

Is "Driver" for Linux Driver? If yes, then drop.

Also drop dash after company name and make model uppercase.

> +
> +maintainers:
> +  - Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
> +  - Pavel Machek <pavel@xxxxxx>

Same as your other patch - not subsystem maintainers but device maintainers.

> +
> +description: |
> +  The PCA9532 family is SMBus I/O expander optimized for dimming LEDs.
> +  The PWM support 256 steps.
> +
> +  For more product information please see the link below:
> +    https://www.nxp.com/docs/en/data-sheet/PCA9532.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nxp,pca9530
> +      - nxp,pca9531
> +      - nxp,pca9532
> +      - nxp,pca9533
> +
> +  reg:
> +    maxItems: 1
> +    description: I2C slave address

Drop description

> +
> +patternProperties:
> +  "^led-[0-9a-z]+$":
> +    type: object
> +    $ref: common.yaml#

unevaluatedProperties: false on this level

> +    properties:
> +      type:
> +        description: |
> +          Output configuration, see dt-bindings/leds/leds-pca9532.h

Full path

> +          Default is 0, PCA9532_TYPE_NONE.

Instead:
default: 0

Don't repeat constraints in free form text.

> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        minimum: 0
> +        maximum: 4
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/leds/leds-pca9532.h>
> +
> +    i2c {
> +        led-controller@62 {
> +                compatible = "nxp,pca9533";

Messed indentation. Use 4 spaces for example indentation.

> +                reg = <0x62>;

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux