Re: [PATCH v3 11/11] arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 5 Dec 2022 at 17:47, Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> On 05/12/2022 17:37, Robert Foss wrote:
> > The sm8350-hdk ships with the LT9611 UXC DSI/HDMI bridge chip.
> >
> > In order to toggle the board to enable the HDMI output,
> > switch #7 & #8 on the rightmost multi-switch package have
> > to be toggled to On.
> >
> > Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
>
> Thank you for your patch. There is something to discuss/improve.
>
> > +
> >  &slpi {
> >       status = "okay";
> >       firmware-name = "qcom/sm8350/slpi.mbn";
> > @@ -544,4 +633,20 @@ usb_hub_enabled_state: usb-hub-enabled-state {
> >               drive-strength = <2>;
> >               output-low;
> >       };
> > +
> > +     lt9611_state: lt9611-state {
> > +             lt9611_rst_pin {
>
> No underscores in node names.

Ack

>
> > +                     pins = "gpio48";
> > +                     function = "normal";
> > +
> > +                     output-high;
> > +                     input-disable;
> > +             };
> > +
> > +             lt9611_irq_pin {
>
> Ditto

Ack

>
> > +                     pins = "gpio50";
> > +                     function = "gpio";
> > +                     bias-disable;
> > +             };
> > +     };
> >  };
>
> Best regards,
> Krzysztof
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux