On 12/27/22 11:48, Anand Moon wrote:
> Rockchip RV1126 has GMAC 10/100/1000M ethernet controller
> add GMAC node for RV1126 SoC.
>
> Signed-off-by: Anand Moon <anand@xxxxxxxxxx>
> Signed-off-by: Jagan Teki <jagan@xxxxxxxxxx>
> ---
> v3: drop the gmac_clkin_m0 & gmac_clkin_m1 fix clock node which are not
> used, Add SoB of Jagan Teki.
> V2: drop SoB of Jagan Teki.
> ---
> arch/arm/boot/dts/rv1126.dtsi | 49 +++++++++++++++++++++++++++++++++++
> 1 file changed, 49 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rv1126.dtsi b/arch/arm/boot/dts/rv1126.dtsi
> index 1cb43147e90b..e20fdd0d333c 100644
> --- a/arch/arm/boot/dts/rv1126.dtsi
> +++ b/arch/arm/boot/dts/rv1126.dtsi
> @@ -90,6 +90,55 @@ xin24m: oscillator {
> #clock-cells = <0>;
> };
>
> + gmac: ethernet@ffc40000 {
Nodes with a reg property are sort on reg address.
Heiko can fix that.. ;)
timer0: timer@ff660000 {
gmac: ethernet@ffc40000 {
emmc: mmc@ffc50000 {
> + compatible = "rockchip,rv1126-gmac", "snps,dwmac-4.20a";
> + reg = <0xffc40000 0x4000>;
> + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq", "eth_wake_irq";
> + rockchip,grf = <&grf>;
> + clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>,
> + <&cru CLK_GMAC_TX_RX>, <&cru CLK_GMAC_REF>,
> + <&cru ACLK_GMAC>, <&cru PCLK_GMAC>,
> + <&cru CLK_GMAC_TX_RX>, <&cru CLK_GMAC_PTPREF>;
> + clock-names = "stmmaceth", "mac_clk_rx",
> + "mac_clk_tx", "clk_mac_ref",
> + "aclk_mac", "pclk_mac",
> + "clk_mac_speed", "ptp_ref";
> + resets = <&cru SRST_GMAC_A>;
> + reset-names = "stmmaceth";
> +
> + snps,mixed-burst;
> + snps,tso;
> +
> + snps,axi-config = <&stmmac_axi_setup>;
> + snps,mtl-rx-config = <&mtl_rx_setup>;
> + snps,mtl-tx-config = <&mtl_tx_setup>;
> + status = "disabled";
> +
> + mdio: mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> + };
> +
> + stmmac_axi_setup: stmmac-axi-config {
> + snps,wr_osr_lmt = <4>;
> + snps,rd_osr_lmt = <8>;
> + snps,blen = <0 0 0 0 16 8 4>;
> + };
> +
> + mtl_rx_setup: rx-queues-config {
> + snps,rx-queues-to-use = <1>;
> + queue0 {};
> + };
> +
> + mtl_tx_setup: tx-queues-config {
> + snps,tx-queues-to-use = <1>;
> + queue0 {};
> + };
> + };
> +
> grf: syscon@fe000000 {
> compatible = "rockchip,rv1126-grf", "syscon", "simple-mfd";
> reg = <0xfe000000 0x20000>;
