Re: [PATCH v3 1/2] dt-bindings: remoteproc: ti: Add new compatible for AM62 SoC family

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27/12/2022 10:38, Devarsh Thakkar wrote:
> 
> 
> On 26/12/22 17:48, Krzysztof Kozlowski wrote:
>> On 23/12/2022 12:56, Devarsh Thakkar wrote:
>>> AM62 family of devices don't have a R5F cluster, instead
>>> they have single core DM R5F.
>>> Add new compatible string ti,am62-r5fss to support this scenario.
>>>
>>> When this new compatible is used don't allow cluster-mode
>>> property usage in device-tree as this implies that there
>>> is no R5F cluster available and only single R5F core
>>> is present.
>>>
>>> Signed-off-by: Devarsh Thakkar <devarsht@xxxxxx>
>>> ---
>>> V2: Avoid acronyms, use "Device Manager" instead of "DM"
>>> V3:
>>> - Use separate if block for each compatible for ti,cluster-mode property
>>> - Rearrange compatibles as per alphabatical order
>>> ---
>>>  .../bindings/remoteproc/ti,k3-r5f-rproc.yaml  | 68 +++++++++++++------
>>>  1 file changed, 47 insertions(+), 21 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
>>> index fb9605f0655b..e8a861179bd9 100644
>>> --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
>>> +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
>>> @@ -21,6 +21,9 @@ description: |
>>>    called "Single-CPU" mode, where only Core0 is used, but with ability to use
>>>    Core1's TCMs as well.
>>>  
>>> +  AM62 SoC family support a single R5F core only which runs Device Manager
>>> +  firmware and can also be used as a remote processor with IPC communication.
>>> +
>>>    Each Dual-Core R5F sub-system is represented as a single DTS node
>>>    representing the cluster, with a pair of child DT nodes representing
>>>    the individual R5F cores. Each node has a number of required or optional
>>> @@ -28,16 +31,20 @@ description: |
>>>    the device management of the remote processor and to communicate with the
>>>    remote processor.
>>>  
>>> +  Since AM62 SoC family only support a single core, there is no cluster-mode
>>> +  property setting required for it.
>>> +
>>>  properties:
>>>    $nodename:
>>>      pattern: "^r5fss(@.*)?"
>>>  
>>>    compatible:
>>>      enum:
>>> +      - ti,am62-r5fss
>>> +      - ti,am64-r5fss
>>>        - ti,am654-r5fss
>>> -      - ti,j721e-r5fss
>>>        - ti,j7200-r5fss
>>> -      - ti,am64-r5fss
>>> +      - ti,j721e-r5fss
>>>        - ti,j721s2-r5fss
>>>  
>>>    power-domains:
>>> @@ -80,7 +87,9 @@ patternProperties:
>>>        node representing a TI instantiation of the Arm Cortex R5F core. There
>>>        are some specific integration differences for the IP like the usage of
>>>        a Region Address Translator (RAT) for translating the larger SoC bus
>>> -      addresses into a 32-bit address space for the processor.
>>> +      addresses into a 32-bit address space for the processor. For AM62x,
>>> +      the R5F Sub-System device node should only define one R5F child node
>>> +      as it has only one core available.
>>>  
>>>        Each R5F core has an associated 64 KB of Tightly-Coupled Memory (TCM)
>>>        internal memories split between two banks - TCMA and TCMB (further
>>> @@ -100,11 +109,12 @@ patternProperties:
>>>      properties:
>>>        compatible:
>>>          enum:
>>> -          - ti,am654-r5f
>>> -          - ti,j721e-r5f
>>> -          - ti,j7200-r5f
>>> -          - ti,am64-r5f
>>> -          - ti,j721s2-r5f
>>> +          - ti,am62-r5fss
>>> +          - ti,am64-r5fss
>>> +          - ti,am654-r5fss
>>> +          - ti,j7200-r5fss
>>> +          - ti,j721e-r5fss
>>> +          - ti,j721s2-r5fss
>>>  
> There is a problem here, the compatibles still need to be "-r5f" I will
> correct it in V4.
>>>        reg:
>>>          items:
>>> @@ -208,19 +218,35 @@ patternProperties:
>>>  
>>>      unevaluatedProperties: false
>>>  
>>> -if:
>>> -  properties:
>>> -    compatible:
>>> -      enum:
>>> -        - ti,am64-r5fss
>>> -then:
>>> -  properties:
>>> -    ti,cluster-mode:
>>> -      enum: [0, 2]
>>> -else:
>>> -  properties:
>>> -    ti,cluster-mode:
>>> -      enum: [0, 1]
>>> +allOf:
>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          enum:
>>> +            - ti,am64-r5fss
>>> +    then:
>>> +      properties:
>>> +        ti,cluster-mode:
>>> +          enum: [0, 2]
>>> +
>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          enum: ["ti,am654-r5fss", "ti,j7200-r5fss", "ti,j721e-r5fss",  "ti,j721s2-r5fss"]
>>
>> That's not how enums are spelled for such cases. Git grep for examples -
>> this should be a enum with each item in new entry, no quotes.
> Yeah, that was my initial thought but then I looked at section 4.9.3 of
> https://json-schema.org/understanding-json-schema/UnderstandingJSONSchema.pdf
> which had below example and based on that did this change thus avoiding
> separate entries for each enum.
> 
> Example:
> {
> "enum": ["red", "amber", "green", null, 42]
> }
> 
> To confirm whether the change works fine, I deliberately modified cluster-mode
> values for each of the SoC's beyond acceptable ranges as seen in
> https://gist.github.com/devarsht/1956063c8e39f1bdbad3574ea96b95a3
> and then ran "make dtbs_check" and it was able to catch the inappropriate
> values of cluster-mode as seen in below logs :
> 
> https://gist.github.com/devarsht/bc8cfb82c55b75d85649585d3fd536a0#file-gistfile1-txt-L392
> https://gist.github.com/devarsht/bc8cfb82c55b75d85649585d3fd536a0#file-gistfile1-txt-L500
> https://gist.github.com/devarsht/bc8cfb82c55b75d85649585d3fd536a0#file-gistfile1-txt-L712
> https://gist.github.com/devarsht/bc8cfb82c55b75d85649585d3fd536a0#file-gistfile1-txt-L741
> https://gist.github.com/devarsht/bc8cfb82c55b75d85649585d3fd536a0#file-gistfile1-txt-L750
> https://gist.github.com/devarsht/bc8cfb82c55b75d85649585d3fd536a0#file-gistfile1-txt-L766
> https://gist.github.com/devarsht/bc8cfb82c55b75d85649585d3fd536a0#file-gistfile1-txt-L773
> 
> Kindly let me know if you see some issues with this approach.

Your syntax is correct just not matching the coding style. Use coding
style matching existing bindings. It's the same in C. Just because you
can write:

void max() {
    ...
}

does not mean we accept such code.

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux