Changes in v5:
- split TYPE_USB define into TYPE_USB2 & TYPE_USB3
Changes in v4:
- use a generic phy header file for dt binding
- cosmetic correction
- add comments
Changes in v3:
- split into separate smaller functions and can be resued
for sata / pcie and usb
- uses macros for registers and values
- cosmetic correction
from Kishon
- create a common file for phy
- cosmetic correction in phy-miphy28lp.txt file
- change initialization of the registers
from Srinivas
- rename and simplify a procedure
- Add Tx impedance and SSC support for SATA and PCI
Hi Kishon,
The goal of this series is to add the support of MiPHY28lp Generic PHY.
I tried to be as close as possible to the MiPHY365x Lee Jones proposal.
Best Regards
Gabriel.
Gabriel Fernandez (8):
phy: miphy28lp: Add Device Tree bindings for the MiPHY28lp
phy: miphy28lp: Add PHY header file for DT x Driver defines
phy: miphy28lp: Provide support for the MiPHY28lp Generic PHY
ARM: DT: STi: STiH407: Add DT node for MiPHY28lp
phy: miphy28lp: Add SSC support for SATA
phy: miphy28lp: Add SSC support for PCIE
phy: miphy28lp: Tune tx impedance across Soc cuts
ARM: multi_v7_defconfig: Enable MiPHY28lp - ST's Generic (SATA, PCIe &
USB3) PHY
.../devicetree/bindings/phy/phy-miphy28lp.txt | 128 ++
arch/arm/boot/dts/stih407-b2120.dts | 11 +
arch/arm/boot/dts/stih407.dtsi | 65 +
arch/arm/configs/multi_v7_defconfig | 1 +
drivers/phy/Kconfig | 8 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-miphy28lp.c | 1283 ++++++++++++++++++++
include/dt-bindings/phy/phy.h | 18 +
8 files changed, 1515 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
create mode 100644 drivers/phy/phy-miphy28lp.c
create mode 100644 include/dt-bindings/phy/phy.h
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
