Hi! > > Add dt binding schema for WorldSemi WS2812B driven using SPI > > bus. > > > > Signed-off-by: Chuanhong Guo <gch981213@xxxxxxxxx> > > --- > > Changes since v1: > > remove linux driver reference from description > > remove some obvious descriptions > > fix unit address regex in multi-led property > > drop various minItems > > add maxItems = 1 to reg > > fix node names and property orders in binding example > > drop -spi from compatible string > > add default-brightness > > > > Change since v2: > > drop "this patch" from commit message > > rename leds to led-controller > > drop default-brightness and default-intensity > > > > Change since v3: > > reword commit title > > > > .../bindings/leds/worldsemi,ws2812b.yaml | 116 ++++++++++++++++++ > > 1 file changed, 116 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/leds/worldsemi,ws2812b.yaml > > > > diff --git a/Documentation/devicetree/bindings/leds/worldsemi,ws2812b.yaml b/Documentation/devicetree/bindings/leds/worldsemi,ws2812b.yaml > > new file mode 100644 > > index 000000000000..548c05ac3d31 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/leds/worldsemi,ws2812b.yaml > > @@ -0,0 +1,116 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/leds/worldsemi,ws2812b.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: WS2812B LEDs driven using SPI > > + > > +maintainers: > > + - Chuanhong Guo <gch981213@xxxxxxxxx> > > + > > +description: | > > + WorldSemi WS2812B is a individually addressable LED chip that can be chained > > + together and controlled individually using a single wire. > > + This binding describes a chain of WS2812B LEDs connected to the SPI MOSI pin. > > + Typical setups includes connecting the data pin of the LED chain to MOSI as > > + the only device or using CS and MOSI with a tri-state voltage-level shifter > > + for the data pin. > > + The SPI frequency needs to be 2.105MHz~2.85MHz for the timing to be correct > > + and the controller needs to send all the bytes continuously. > > + > > +allOf: > > + - $ref: /schemas/spi/spi-peripheral-props.yaml# > > + > > +properties: > > + compatible: > > + const: worldsemi,ws2812b > > + > > + reg: > > + maxItems: 1 > > + > > + spi-max-frequency: > > + minimum: 2105000 > > + maximum: 2850000 > > + > > + "#address-cells": > > + const: 1 > > + > > + "#size-cells": > > + const: 0 > > + > > +patternProperties: > > + "^multi-led@[0-9a-f]+$": > > + type: object > > + $ref: leds-class-multicolor.yaml# > > + unevaluatedProperties: false > > + > > + properties: > > + color-index: > > + description: | > > + A 3-item array specifying color of each components in this LED. It > > + should be one of the LED_COLOR_ID_* prefixed definitions from the > > + header include/dt-bindings/leds/common.h. Defaults to > > + <LED_COLOR_ID_GREEN LED_COLOR_ID_RED LED_COLOR_ID_BLUE> > > + if unspecified. > > + $ref: /schemas/types.yaml#/definitions/uint32-array > > + maxItems: 3 > > In general I am fine with it, although there is still question for > adding more multi-color defines in binding headers to replace this > property - GRB/RBG/GBR and even more for RGBW. > > Pavel, Lee, any thoughts from your side? This really needs to mention the name this hardware is known as -- I believe it is NeoPixel. Best regards, Pavel -- People of Russia, stop Putin before his war on Ukraine escalates.
Attachment:
signature.asc
Description: PGP signature
