On 22/12/2022 10:42, Srinivasa Rao Mandadapu wrote:
> Update VA, RX and TX macro and lpass_tlmm clock properties and
> enable them.
No. You need to describe why you are doing. Not just "Update".
Everything is an "update".
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
> Tested-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
> ---
> .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 43 ++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> index ce5d69e..a0061ef 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> @@ -119,6 +119,49 @@
> status = "okay";
> };
>
> +&lpass_tlmm {
> + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
> +
> + clock-names = "core", "audio";
> + reg = <0 0x033c0000 0x0 0x20000>,
> + <0 0x03550000 0x0 0xa100>;
1. Why are you doing it?
2. Why here, not in DTSI?
3. Does it pass dtbs_check?
> +};
> +
> +&lpass_va_macro {
> + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
> +
> + clock-names = "mclk", "macro", "dcodec";
> + power-domain-names = "null";
???
This code looks like not taken from mainline, but some odd tree. Please
work on mainline. Do you see anywhere names called "null"?
Best regards,
Krzysztof
