On 22/12/2022 10:42, Srinivasa Rao Mandadapu wrote:
> Split common idp dtsi file into audio specific dtsi and common
> idp dtsi file.
>
> It is required to isolate idp and crd-rev3 platform device tree nodes
> and convert crd-rev3 platform device tree nodes into audioreach specific
> device tree nodes.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
> Tested-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi | 242 +++++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 1 +
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 230 -----------------------
> arch/arm64/boot/dts/qcom/sc7280-idp2.dts | 1 +
> 4 files changed, 244 insertions(+), 230 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
> new file mode 100644
> index 0000000..8c9e667
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
> @@ -0,0 +1,242 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * sc7280 Audio IDP board device tree source (common between SKU1 and SKU2)
> + *
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
Mising includes. Each file is responsible for its own includes and must
not rely on others to include something.
> +/{
> + /* BOARD-SPECIFIC TOP LEVEL NODES */
Wrong indentation.
> + sound: sound {
> + compatible = "google,sc7280-herobrine";
> + model = "sc7280-wcd938x-max98360a-1mic";
> +
> + audio-routing =
> + "IN1_HPHL", "HPHL_OUT",
> + "IN2_HPHR", "HPHR_OUT",
> + "AMIC1", "MIC BIAS1",
> + "AMIC2", "MIC BIAS2",
> + "VA DMIC0", "MIC BIAS3",
> + "VA DMIC1", "MIC BIAS3",
> + "VA DMIC2", "MIC BIAS1",
> + "VA DMIC3", "MIC BIAS1",
> + "TX SWR_ADC0", "ADC1_OUTPUT",
> + "TX SWR_ADC1", "ADC2_OUTPUT",
> + "TX SWR_ADC2", "ADC3_OUTPUT",
> + "TX SWR_DMIC0", "DMIC1_OUTPUT",
> + "TX SWR_DMIC1", "DMIC2_OUTPUT",
> + "TX SWR_DMIC2", "DMIC3_OUTPUT",
> + "TX SWR_DMIC3", "DMIC4_OUTPUT",
> + "TX SWR_DMIC4", "DMIC5_OUTPUT",
> + "TX SWR_DMIC5", "DMIC6_OUTPUT",
> + "TX SWR_DMIC6", "DMIC7_OUTPUT",
> + "TX SWR_DMIC7", "DMIC8_OUTPUT";
> +
> + qcom,msm-mbhc-hphl-swh = <1>;
> + qcom,msm-mbhc-gnd-swh = <1>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #sound-dai-cells = <0>;
> +
> + dai-link@0 {
> + link-name = "MAX98360A";
> + reg = <0>;
> +
> + cpu {
> + sound-dai = <&lpass_cpu MI2S_SECONDARY>;
> + };
> +
> + codec {
> + sound-dai = <&max98360a>;
I have no clue what happened here. This was correct code before, now it
is not. It turns out it was not just a move of code. If you just
cut+paste, would be fine, but you changed it during moving and now we
have to review it. Reviewing such diffs is difficult if not impossible,
so we have no way to validate, maybe except comparing de-compiled dtbs
(dtx_diff, fdtdump). Did you do it?
Otherwise I do not see a way how can we be sure this code is correct if
you do not cut+paste but change the code in the meantime.
Best regards,
Krzysztof
