Use generic node name for rk3399.dtsi dp node.
With the conversion of rockchip,analogix-dp.yaml a port@1 node
is required, so add a node with label edp_out.
Also restyle.
Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 2250533cf..e02483b72 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -2037,7 +2037,7 @@
};
};
- edp: edp@ff970000 {
+ edp: dp@ff970000 {
compatible = "rockchip,rk3399-edp";
reg = <0x0 0xff970000 0x0 0x8000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -2054,6 +2054,7 @@
ports {
#address-cells = <1>;
#size-cells = <0>;
+
edp_in: port@0 {
reg = <0>;
#address-cells = <1>;
@@ -2069,6 +2070,10 @@
remote-endpoint = <&vopl_out_edp>;
};
};
+
+ edp_out: port@1 {
+ reg = <1>;
+ };
};
};
--
2.20.1
