[PATCH 3/7] arm64: dts: qcom: sc7280: audioreach: Add lpass pil node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add lpass pil node for sc7280 based audioreach platforms.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Tested-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
---
This patch depends on:
    -- https://lore.kernel.org/linux-remoteproc/6e0590af-0bd1-cbef-c573-fa62b5bc9e63@xxxxxxxxxxx/

 .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi  | 99 ++++++++++++++++++++++
 1 file changed, 99 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
index 1eac94e1..0ce8755 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
@@ -110,3 +110,102 @@
 		};
 	};
 };
+
+&soc {
+	qcom,lpass@3000000 {
+		compatible = "qcom,sc7280-adsp-pil";
+		reg = <0 0x03000000 0 0x5000>,
+			<0 0x0355b000 0 0x10>;
+
+		reg-names = "qdsp6ss_base",
+			"lpass_efuse";
+
+		interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					<&adsp_smp2p_in 0 0>,
+					<&adsp_smp2p_in 1 0>,
+					<&adsp_smp2p_in 2 0>,
+					<&adsp_smp2p_in 3 0>,
+					<&adsp_smp2p_in 7 0>;
+
+		interrupt-names = "wdog", "fatal", "ready",
+			"handover", "stop-ack",  "shutdown-ack";
+		qcom,qmp = <&aoss_qmp>;
+
+		clocks = <&rpmhcc RPMH_CXO_CLK>,
+			<&gcc GCC_CFG_NOC_LPASS_CLK>,
+			<&lpasscc LPASS_QDSP6SS_XO_CLK>,
+			<&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
+			<&lpasscc LPASS_QDSP6SS_CORE_CLK>;
+
+		clock-names = "xo", "gcc_cfg_noc_lpass",
+				"lpass_qdsp6ss_xo",
+				"lpass_qdsp6ss_sleep",
+				"lpass_qdsp6ss_core";
+
+		iommus = <&apps_smmu 0x1800 0x0>;
+
+		power-domains =	<&rpmhpd SC7280_LCX>;
+		power-domain-names = "lcx";
+		required-opps = <&rpmhpd_opp_nom>;
+
+		resets = <&aoss_reset AOSS_CC_LPASS_RESTART>,
+			<&pdc_reset PDC_AUDIO_SYNC_RESET>;
+
+		reset-names = "cc_lpass", "pdc_sync";
+
+		qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>;
+
+		memory-region = <&adsp_mem>;
+
+		status = "okay";
+
+		qcom,smem-states = <&adsp_smp2p_out 0>;
+		qcom,smem-state-names = "stop";
+
+		glink-edge {
+			interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP
+						IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_LPASS
+					IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			label = "lpass";
+			qcom,remote-pid = <2>;
+
+			gpr {
+				compatible = "qcom,gpr";
+				qcom,glink-channels = "adsp_apps";
+				qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				qcom,intents = <512 20>;
+
+				q6apm: q6apm {
+					reg = <GPR_APM_MODULE_IID>;
+					compatible = "qcom,q6apm";
+					#sound-dai-cells = <0>;
+					q6apmdai: dais {
+						compatible = "qcom,q6apm-dais";
+						#sound-dai-cells = <1>;
+						iommus = <&apps_smmu 0x1801 0x0>;
+					};
+
+					q6apmbedai: bedais {
+						compatible = "qcom,q6apm-lpass-dais";
+						#sound-dai-cells = <1>;
+					};
+				};
+
+				q6prm: q6prm {
+					reg = <GPR_PRM_MODULE_IID>;
+					compatible = "qcom,q6prm";
+					#clock-cells = <2>;
+					q6prmcc: cc {
+						compatible = "qcom,q6prm-lpass-clocks";
+						#clock-cells = <2>;
+					};
+				};
+			};
+		};
+	};
+};
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux