From: Daire McNamara <daire.mcnamara@xxxxxxxxxxxxx>
On Microchip PolarFire SoC the PCIe Root Port is behind a set of Fabric
Interface Controller (FIC) buses that encapsulate buses like ABP/AHP and
AXI-M. Depending on which FIC(s) the Root Port is wired through to cpu
space, the Root Port driver needs to take account of the address
translation done by a parent (e.g. fabric) node before setting up its
own outbound address translation tables to config space and attached
devices.
Parse the range properties to determine how much address translation
needs to be done in the Root Port.
Signed-off-by: Daire McNamara <daire.mcnamara@xxxxxxxxxxxxx>
Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
drivers/pci/controller/pcie-microchip-host.c | 109 +++++++++++++++----
1 file changed, 86 insertions(+), 23 deletions(-)
diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/pcie-microchip-host.c
index 2ba96d7f9095..ee8796db461e 100644
--- a/drivers/pci/controller/pcie-microchip-host.c
+++ b/drivers/pci/controller/pcie-microchip-host.c
@@ -85,27 +85,42 @@
#define IMSI_ADDR 0x190
#define ISTATUS_MSI 0x194
+#define ATR_WINDOW_DESC_SIZE 32
+#define ATR_PCIE_ATR_SIZE 0x25
+#define ATR_SIZE_SHIFT 1
+#define ATR_IMPL_ENABLE 1
+
/* PCIe Master table init defines */
#define ATR0_PCIE_WIN0_SRCADDR_PARAM 0x600u
-#define ATR0_PCIE_ATR_SIZE 0x25
-#define ATR0_PCIE_ATR_SIZE_SHIFT 1
#define ATR0_PCIE_WIN0_SRC_ADDR 0x604u
#define ATR0_PCIE_WIN0_TRSL_ADDR_LSB 0x608u
#define ATR0_PCIE_WIN0_TRSL_ADDR_UDW 0x60cu
#define ATR0_PCIE_WIN0_TRSL_PARAM 0x610u
+enum {
+ TRSL_ID_PCIE_TXRX,
+ TRSL_ID_PCIE_CONFIG,
+ TRSL_ID_AXI4_LITE_MASTER,
+ TRSL_ID_AXI4_MASTER_0 = 4,
+ TRSL_ID_AXI4_MASTER_1,
+ TRSL_ID_AXI4_MASTER_2,
+ TRSL_ID_AXI4_MASTER_3,
+ TRSL_ID_AXI4_STREAM_0,
+ TRSL_ID_AXI4_STREAM_1,
+ TRSL_ID_AXI4_STREAM_2,
+ TRSL_ID_AXI4_STREAM_3,
+ TRSL_ID_INTERNAL_BRIDGE_REGISTERS
+};
+
+#define ATR0_PCIE_WIN0_TRSL_MASK_LSB 0x618u
+#define ATR0_PCIE_WIN0_TRSL_MASK_UDW 0x61cu
+
/* PCIe AXI slave table init defines */
#define ATR0_AXI4_SLV0_SRCADDR_PARAM 0x800u
-#define ATR_SIZE_SHIFT 1
-#define ATR_IMPL_ENABLE 1
#define ATR0_AXI4_SLV0_SRC_ADDR 0x804u
#define ATR0_AXI4_SLV0_TRSL_ADDR_LSB 0x808u
#define ATR0_AXI4_SLV0_TRSL_ADDR_UDW 0x80cu
#define ATR0_AXI4_SLV0_TRSL_PARAM 0x810u
-#define PCIE_TX_RX_INTERFACE 0x00000000u
-#define PCIE_CONFIG_INTERFACE 0x00000001u
-
-#define ATR_ENTRY_SIZE 32
/* PCIe Controller Phy Regs */
#define SEC_ERROR_EVENT_CNT 0x20
@@ -270,6 +285,7 @@ struct mc_pcie {
struct irq_domain *event_domain;
raw_spinlock_t lock;
struct mc_msi msi;
+ u64 outbound_range_offset;
};
struct cause {
@@ -930,36 +946,36 @@ static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
phys_addr_t axi_addr, phys_addr_t pci_addr,
size_t size)
{
- u32 atr_sz = ilog2(size) - 1;
+ u32 atr_size = ilog2(size) - 1;
u32 val;
if (index == 0)
- val = PCIE_CONFIG_INTERFACE;
+ val = TRSL_ID_PCIE_CONFIG;
else
- val = PCIE_TX_RX_INTERFACE;
+ val = TRSL_ID_PCIE_TXRX;
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ writel(val, bridge_base_addr + (index * ATR_WINDOW_DESC_SIZE) +
ATR0_AXI4_SLV0_TRSL_PARAM);
- val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
+ val = lower_32_bits(axi_addr) | (atr_size << ATR_SIZE_SHIFT) |
ATR_IMPL_ENABLE;
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ writel(val, bridge_base_addr + (index * ATR_WINDOW_DESC_SIZE) +
ATR0_AXI4_SLV0_SRCADDR_PARAM);
val = upper_32_bits(axi_addr);
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ writel(val, bridge_base_addr + (index * ATR_WINDOW_DESC_SIZE) +
ATR0_AXI4_SLV0_SRC_ADDR);
val = lower_32_bits(pci_addr);
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ writel(val, bridge_base_addr + (index * ATR_WINDOW_DESC_SIZE) +
ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
val = upper_32_bits(pci_addr);
- writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+ writel(val, bridge_base_addr + (index * ATR_WINDOW_DESC_SIZE) +
ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
- val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
+ val |= (ATR_PCIE_ATR_SIZE << ATR_SIZE_SHIFT);
writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
}
@@ -972,14 +988,14 @@ static int mc_pcie_setup_windows(struct platform_device *pdev,
struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
struct resource_entry *entry;
u64 pci_addr;
- u32 index = 1;
+ u32 index = 1; /* Window 0 used for config space */
resource_list_for_each_entry(entry, &bridge->windows) {
if (resource_type(entry->res) == IORESOURCE_MEM) {
pci_addr = entry->res->start - entry->offset;
mc_pcie_setup_window(bridge_base_addr, index,
- entry->res->start, pci_addr,
- resource_size(entry->res));
+ entry->res->start - port->outbound_range_offset,
+ pci_addr, resource_size(entry->res));
index++;
}
}
@@ -1103,6 +1119,44 @@ static int mc_init_interrupts(struct platform_device *pdev, struct mc_pcie *port
return 0;
}
+static int mc_check_for_parent_range_handling(struct platform_device *pdev, struct mc_pcie *port)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *dn = dev->of_node;
+ struct of_range_parser parser;
+ struct of_range range;
+ u64 cpu_addr;
+
+ /* Find any pcie range */
+ if (of_range_parser_init(&parser, dn)) {
+ dev_err(dev, "missing ranges property\n");
+ return -EINVAL;
+ }
+
+ for_each_of_range(&parser, &range) {
+ cpu_addr = range.cpu_addr;
+ /*
+ * First range is enough - extend if anyone ever needs more
+ * than one fabric interface
+ */
+ break;
+ }
+
+ /* Check for one level up; that is enough */
+ dn = of_get_parent(dn);
+ if (dn) {
+ of_range_parser_init(&parser, dn);
+ for_each_of_range(&parser, &range) {
+ /* Find the parent range that contains cpu_addr */
+ if (range.cpu_addr > port->outbound_range_offset &&
+ range.cpu_addr < cpu_addr)
+ port->outbound_range_offset = range.cpu_addr;
+ }
+ }
+
+ return 0;
+}
+
static int mc_platform_init(struct pci_config_window *cfg)
{
struct device *dev = cfg->parent;
@@ -1111,9 +1165,18 @@ static int mc_platform_init(struct pci_config_window *cfg)
port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
int ret;
+ /*
+ * Need information about any parent bus that may be performing some
+ * of the outbound address translation to setup outbound address
+ * translation tables later
+ */
+ ret = mc_check_for_parent_range_handling(pdev, port);
+ if (ret)
+ return ret;
+
/* Configure address translation table 0 for PCIe config space */
- mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start,
- cfg->res.start,
+ mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start - port->outbound_range_offset,
+ cfg->res.start - port->outbound_range_offset,
resource_size(&cfg->res));
/* Need some fixups in config space */
--
2.25.1
