RE: [Patch v3 05/15] Documention: v4l: Documentation for VP9 CIDs.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Nicolas Dufresne [mailto:nicolas@xxxxxxxxxxxx]
> Sent: 16 December 2022 22:51
> To: Aakarsh Jain <aakarsh.jain@xxxxxxxxxxx>; 'Hans Verkuil' <hverkuil-
> cisco@xxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> media@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx
> Cc: m.szyprowski@xxxxxxxxxxx; andrzej.hajda@xxxxxxxxx;
> mchehab@xxxxxxxxxx; ezequiel@xxxxxxxxxxxxxxxxxxxx;
> jernej.skrabec@xxxxxxxxx; benjamin.gaignard@xxxxxxxxxxxxx;
> stanimir.varbanov@xxxxxxxxxx; dillon.minfei@xxxxxxxxx;
> david.plowman@xxxxxxxxxxxxxxx; mark.rutland@xxxxxxx;
> robh+dt@xxxxxxxxxx; krzk+dt@xxxxxxxxxx; andi@xxxxxxxxxxx;
> alim.akhtar@xxxxxxxxxxx; aswani.reddy@xxxxxxxxxxx;
> pankaj.dubey@xxxxxxxxxxx; linux-fsd@xxxxxxxxx; smitha.t@xxxxxxxxxxx
> Subject: Re: [Patch v3 05/15] Documention: v4l: Documentation for VP9 CIDs.
> 
> Le mercredi 14 décembre 2022 à 15:52 +0530, Aakarsh Jain a écrit :
> >
> > > -----Original Message-----
> > > From: Hans Verkuil [mailto:hverkuil-cisco@xxxxxxxxx]
> > > Sent: 24 November 2022 16:54
> > > To: aakarsh jain <aakarsh.jain@xxxxxxxxxxx>; linux-arm-
> > > kernel@xxxxxxxxxxxxxxxxxxx; linux-media@xxxxxxxxxxxxxxx; linux-
> > > kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx
> > > Cc: m.szyprowski@xxxxxxxxxxx; andrzej.hajda@xxxxxxxxx;
> > > mchehab@xxxxxxxxxx; ezequiel@xxxxxxxxxxxxxxxxxxxx;
> > > jernej.skrabec@xxxxxxxxx; benjamin.gaignard@xxxxxxxxxxxxx;
> > > stanimir.varbanov@xxxxxxxxxx; dillon.minfei@xxxxxxxxx;
> > > david.plowman@xxxxxxxxxxxxxxx; mark.rutland@xxxxxxx;
> > > robh+dt@xxxxxxxxxx; krzk+dt@xxxxxxxxxx; andi@xxxxxxxxxxx;
> > > alim.akhtar@xxxxxxxxxxx; aswani.reddy@xxxxxxxxxxx;
> > > pankaj.dubey@xxxxxxxxxxx; linux-fsd@xxxxxxxxx;
> smitha.t@xxxxxxxxxxx
> > > Subject: Re: [Patch v3 05/15] Documention: v4l: Documentation for VP9
> CIDs.
> > >
> > > On 11/10/2022 14:25, aakarsh jain wrote:
> > > > From: Smitha T Murthy <smitha.t@xxxxxxxxxxx>
> > > >
> > > > Adds V4l2 controls for VP9 encoder documention.
> > > >
> > > > Cc: linux-fsd@xxxxxxxxx
> > > > Signed-off-by: Smitha T Murthy <smitha.t@xxxxxxxxxxx>
> > > > Signed-off-by: Aakarsh Jain <aakarsh.jain@xxxxxxxxxxx>
> > > > ---
> > > >  .../media/v4l/ext-ctrls-codec.rst             | 167 ++++++++++++++++++
> > > >  1 file changed, 167 insertions(+)
> > > >
> > > > diff --git
> > > > a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> > > > b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> > > > index 2a165ae063fb..2277d83a7cf0 100644
> > > > --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> > > > +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> > > > @@ -2187,6 +2187,16 @@ enum v4l2_mpeg_video_vp8_profile -
> > > >      * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_3``
> > > >        - Profile 3
> > > >
> > > > +VP9 Control Reference
> > >
> > > This is wrong. There is a VPX Control Reference section for both VP8
> > > and VP9 controls. That's where this should be added. I suspect
> > > several of the controls you are adding here already exist, e.g.
> > > V4L2_CID_MPEG_VIDEO_VPX_MIN_QP. The documentation may have
> to be
> > > updated to specify that it is for both VP8 and VP9.
> > >
> > Since MFC has different profiles, different quantization parameter ranges
> for both VP8 and VP9. So we can't use same control ID's for both.
> > So for example in VP8 with control ID
> (V4L2_CID_MPEG_VIDEO_VPX_MIN_QP), QP ranges from 0-11 and in VP9
> with control ID  (V4L2_CID_CODEC_VP9_MIN_QP) QP ranges from 1-24. So
> we can't club together into single control.
> >
> 
> V4L2_CID_MPEG_VIDEO_VPX_PROFILE has been deprecated, and replace
> with menu controls. So we now have a
> V4L2_CID_MPEG_VIDEO_VP8_PROFILE and a
> V4L2_CID_MPEG_VIDEO_VP9_PROFILE as menues. Newly written drivers
> should use these. I see that GStreamer notably has never been ported, I'll fix
> it.
> 
> When you implement a driver, the generic uAPI will cover all possible items,
> as menus (a integer was an API mistake made in 2011, hence the
> deprecation). You driver can then select which menu items it support, and its
> server at telling userspace what this HW supports. Though, this should be no
> problem if you want to keep the old CID for backward compat, since the
> range is just totally undefined there.
> 
> For V4L2_CID_MPEG_VIDEO_VPX_MIN_QP (and friends), the doc says
> "Minimum quantization parameter for VP8.". A bit strange for a supposedly
> VPX parameter.
> But its defines in the code as "VPX Minimum QP Value". Clearly something to
> be fixed. There is no VP9 encoder drivers yet in mainline.
> 
> Though, the range for these controls is driver defined. In Venus, for VP8:
> 
> 
>         v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
>                 V4L2_CID_MPEG_VIDEO_VPX_MIN_QP, 1, 128, 1, 1);
> 
> It seems to be 1 to 128. While in MFC, it oddly 1 to 11:
> 
> 
>         {
>                 .id = V4L2_CID_MPEG_VIDEO_VPX_MIN_QP,
>                 .type = V4L2_CTRL_TYPE_INTEGER,
>                 .minimum = 0,
>                 .maximum = 11,
>                 .step = 1,
>                 .default_value = 0,
>         },
> 
> While I'm not a huge fan of this, since we all know QP does not scale linearly,
> this is how it is, and this is kind of part of the kernel API now. So userspace
> must ask the driver what is the QP range, and adapt. And in your case, you
> should have no issue adding VP9 encoder with a 1 to 24 range (even if this is a
> bit odd and hw specific).
> 
> Nicolas
> 

So all controls which I am using in VP9 similar to VPX will implement that as menu control. Will not touch VPX controls for backward compatibility.
Also will change all remaining VP9 controls implementation from Integer to menu control. 

Will this be fine ?

> 
> > > > +---------------------
> > > > +
> > > > +The VP9 controls include controls for encoding parameters of VP9
> > > > +video codec.
> > > > +
> > > > +.. _vp9-control-id:
> > > > +
> > > > +VP9 Control IDs
> > > > +
> > > >  .. _v4l2-mpeg-video-vp9-profile:
> > > >
> > > >  ``V4L2_CID_MPEG_VIDEO_VP9_PROFILE``
> > > > @@ -2253,6 +2263,163 @@ enum v4l2_mpeg_video_vp9_level -
> > > >      * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_2``
> > > >        - Level 6.2
> > > >
> > > > +``V4L2_CID_CODEC_VP9_I_FRAME_QP``
> > >
> > > If you do need to add new controls, then please use the same
> > > MPEG_VIDEO_ prefix.
> > > It's a bit ugly and historical, but let's keep it consistent with the others.
> > >
> > > Regards,
> > >
> > > 	Hans
> > >
> > > > +    Quantization parameter for an I frame for VP9. Valid range:
> > > > + from 1 to
> > > 255.
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_P_FRAME_QP``
> > > > +    Quantization parameter for an P frame for VP9. Valid range:
> > > > +from 1 to
> > > 255.
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_MAX_QP``
> > > > +    Maximum quantization parameter for VP9. Valid range: from 1 to
> 255.
> > > > +    Recommended range for MFC is from 230 to 255.
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_MIN_QP``
> > > > +    Minimum quantization parameter for VP9. Valid range: from 1 to
> 255.
> > > > +    Recommended range for MFC is from 1 to 24.
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_RC_FRAME_RATE``
> > > > +    Indicates the number of evenly spaced subintervals, called ticks,
> within
> > > > +    one second. This is a 16 bit unsigned integer and has a
> > > > +maximum value
> > > up to
> > > > +    0xffff and a minimum value of 1.
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_GF_REFRESH_PERIOD``
> > > > +    Indicates the refresh period of the golden frame for VP9 encoder.
> > > > +
> > > > +.. _v4l2-vp9-golden-frame-sel:
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_GOLDEN_FRAMESEL``
> > > > +    (enum)
> > > > +
> > > > +enum v4l2_mpeg_vp9_golden_framesel -
> > > > +    Selects the golden frame for encoding. Valid when NUM_OF_REF is
> 2.
> > > > +    Possible values are:
> > > > +
> > > > +.. raw:: latex
> > > > +
> > > > +    \footnotesize
> > > > +
> > > > +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
> > > > +
> > > > +.. flat-table::
> > > > +    :header-rows:  0
> > > > +    :stub-columns: 0
> > > > +
> > > > +    * - ``V4L2_CID_CODEC_VP9_GOLDEN_FRAME_USE_PREV``
> > > > +      - Use the (n-2)th frame as a golden frame, current frame index
> being
> > > > +        'n'.
> > > > +    * - ``V4L2_CID_CODEC_VP9_GOLDEN_FRAME_USE_REF_PERIOD``
> > > > +      - Use the previous specific frame indicated by
> > > > +        ``V4L2_CID_CODEC_VP9_GF_REFRESH_PERIOD`` as a
> > > > +        golden frame.
> > > > +
> > > > +.. raw:: latex
> > > > +
> > > > +    \normalsize
> > > > +
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_HIERARCHY_QP_ENABLE``
> > > > +    Allows host to specify the quantization parameter values for each
> > > > +    temporal layer through HIERARCHICAL_QP_LAYER. This is valid only
> > > > +    if HIERARCHICAL_CODING_LAYER is greater than 1. Setting the
> control
> > > > +    value to 1 enables setting of the QP values for the layers.
> > > > +
> > > > +.. _v4l2-vp9-ref-number-of-pframes:
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_REF_NUMBER_FOR_PFRAMES``
> > > > +    (enum)
> > > > +
> > > > +enum v4l2_mpeg_vp9_ref_num_for_pframes -
> > > > +    Number of reference pictures for encoding P frames.
> > > > +
> > > > +.. raw:: latex
> > > > +
> > > > +    \footnotesize
> > > > +
> > > > +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
> > > > +
> > > > +.. flat-table::
> > > > +    :header-rows:  0
> > > > +    :stub-columns: 0
> > > > +
> > > > +    * - ``V4L2_CID_CODEC_VP9_1_REF_PFRAME``
> > > > +      - Indicates one reference frame, last encoded frame will be
> searched.
> > > > +    * - ``V4L2_CID_CODEC_VP9_GOLDEN_FRAME_USE_REF_PERIOD``
> > > > +      - Indicates 2 reference frames, last encoded frame and golden
> frame
> > > > +        will be searched.
> > > > +
> > > > +.. raw:: latex
> > > > +
> > > > +    \normalsize
> > > > +
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_HIERARCHICAL_CODING_LAYER``
> > > > +    Indicates the number of hierarchial coding layer.
> > > > +    In normal encoding (non-hierarchial coding), it should be zero.
> > > > +    VP9 has upto 3 layer of encoder.
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_HIERARCHY_RC_ENABLE``
> > > > +    Indicates enabling of bit rate for hierarchical coding layers VP9
> encoder.
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_HIER_CODING_L0_BR``
> > > > +    Indicates bit rate for hierarchical coding layer 0 for VP9 encoder.
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_HIER_CODING_L1_BR``
> > > > +    Indicates bit rate for hierarchical coding layer 1 for VP9 encoder.
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_HIER_CODING_L2_BR``
> > > > +    Indicates bit rate for hierarchical coding layer 2 for VP9 encoder.
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_HIER_CODING_L0_QP``
> > > > +    Indicates quantization parameter for hierarchical coding layer 0.
> > > > +    Valid range: [V4L2_CID_CODEC_VP9_MIN_QP,
> > > > +    V4L2_CID_CODEC_VP9_MAX_QP].
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_HIER_CODING_L1_QP``
> > > > +    Indicates quantization parameter for hierarchical coding layer 1.
> > > > +    Valid range: [V4L2_CID_CODEC_VP9_MIN_QP,
> > > > +    V4L2_CID_CODEC_VP9_MAX_QP].
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_HIER_CODING_L2_QP``
> > > > +    Indicates quantization parameter for hierarchical coding layer 2.
> > > > +    Valid range: [V4L2_CID_CODEC_VP9_MIN_QP,
> > > > +    V4L2_CID_CODEC_VP9_MAX_QP].
> > > > +
> > > > +.. _v4l2-vp9-max-partition-depth:
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_MAX_PARTITION_DEPTH``
> > > > +    (enum)
> > > > +
> > > > +enum v4l2_mpeg_vp9_num_partitions -
> > > > +    Indicate maximum coding unit depth.
> > > > +
> > > > +.. raw:: latex
> > > > +
> > > > +    \footnotesize
> > > > +
> > > > +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
> > > > +
> > > > +.. flat-table::
> > > > +    :header-rows:  0
> > > > +    :stub-columns: 0
> > > > +
> > > > +    * - ``V4L2_CID_CODEC_VP9_0_PARTITION``
> > > > +      - No coding unit partition depth.
> > > > +    * - ``V4L2_CID_CODEC_VP9_1_PARTITION``
> > > > +      - Allows one coding unit partition depth.
> > > > +
> > > > +.. raw:: latex
> > > > +
> > > > +    \normalsize
> > > > +
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_DISABLE_INTRA_PU_SPLIT``
> > > > +    Zero indicates enable intra NxN PU split.
> > > > +    One indicates disable intra NxN PU split.
> > > > +
> > > > +``V4L2_CID_CODEC_VP9_DISABLE_IVF_HEADER``
> > > > +    Indicates IVF header generation. Zero indicates enable IVF format.
> > > > +    One indicates disable IVF format.
> > > > +
> > > >
> > > >  High Efficiency Video Coding (HEVC/H.265) Control Reference
> > > >
> > >
> ==========================================================
> > > =
> >
> >







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux