Re: [PATCH v7 11/11] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 15, 2022 at 12:54:38AM +0100, Christian Marangi wrote:
> Add LEDs definition example for qca8k using the offload trigger as the
> default trigger and add all the supported offload triggers by the
> switch.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> ---
>  .../devicetree/bindings/net/dsa/qca8k.yaml    | 24 +++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> index 978162df51f7..4090cf65c41c 100644
> --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> @@ -65,6 +65,8 @@ properties:
>                   internal mdio access is used.
>                   With the legacy mapping the reg corresponding to the internal
>                   mdio is the switch reg with an offset of -1.
> +                 Each phy have at least 3 LEDs connected and can be declared
> +                 using the standard LEDs structure.
>  
>  patternProperties:
>    "^(ethernet-)?ports$":
> @@ -202,6 +204,7 @@ examples:
>      };
>    - |
>      #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/leds/common.h>
>  
>      mdio {
>          #address-cells = <1>;
> @@ -284,6 +287,27 @@ examples:
>  
>                  internal_phy_port1: ethernet-phy@0 {
>                      reg = <0>;
> +
> +                    leds {
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +
> +                        led@0 {
> +                            reg = <0>;
> +                            color = <LED_COLOR_ID_WHITE>;
> +                            function = LED_FUNCTION_LAN;
> +                            function-enumerator = <1>;
> +                            linux,default-trigger = "netdev";
> +                        };
> +
> +                        led@1 {
> +                            reg = <1>;
> +                            color = <LED_COLOR_ID_AMBER>;
> +                            function = LED_FUNCTION_LAN;
> +                            function-enumerator = <1>;
> +                            linux,default-trigger = "netdev";
> +                        };
> +                    };
>                  };

I don't see anything here which is specific to the QCA8K. I really
hope the same binding should work for any PHY which has LEDs. So
please move this into ethernet-phy.yaml.

       Andrew



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux