Re: [PATCH v4 2/4] arm64: dts: qcom: sm6125: Add UFS nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 20 Dec 2022 at 21:33, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>
>
>
> On 20.12.2022 19:57, Lux Aliaga wrote:
> > On 16/12/2022 08:24, Konrad Dybcio wrote:
> >
> >>
> >> On 15.12.2022 20:04, Lux Aliaga wrote:
> >>> Adds a UFS host controller node and its corresponding PHY to
> >>> the sm6125 platform.
> >>>
> >>> Signed-off-by: Lux Aliaga <they@xxxxxxxxx>
> >>> ---
> >> Please include a changelog, I don't know what you changed and
> >> what you didn't. Also, you sent 4 revisions in one day, not
> >> letting others review it.
> >>
> >>
> >>>   arch/arm64/boot/dts/qcom/sm6125.dtsi | 67 ++++++++++++++++++++++++++++
> >>>   1 file changed, 67 insertions(+)
> >>>
> >>> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> >>> index 7e25a4f85594..b64c5bc1452f 100644
> >>> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> >>> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> >>> @@ -508,6 +508,73 @@ sdhc_2: mmc@4784000 {
> >>>               status = "disabled";
> >>>           };
> >>>   +        ufs_mem_hc: ufs@4804000 {
> >>> +            compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
> >>> +            reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
> >>> +            reg-names = "std", "ice";
> >>> +            interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> >>> +            phys = <&ufs_mem_phy_lanes>;
> >>> +            phy-names = "ufsphy";
> >>> +            lanes-per-direction = <1>;
> >>> +            #reset-cells = <1>;
> >>> +            resets = <&gcc GCC_UFS_PHY_BCR>;
> >>> +            reset-names = "rst";
> >>> +
> >>> +            clock-names = "core_clk",
> >>> +                      "bus_aggr_clk",
> >>> +                      "iface_clk",
> >>> +                      "core_clk_unipro",
> >>> +                      "ref_clk",
> >>> +                      "tx_lane0_sync_clk",
> >>> +                      "rx_lane0_sync_clk",
> >>> +                      "ice_core_clk";
> >>> +            clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
> >>> +                 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
> >>> +                 <&gcc GCC_UFS_PHY_AHB_CLK>,
> >>> +                 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> >>> +                 <&rpmcc RPM_SMD_XO_CLK_SRC>,
> >>> +                 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> >>> +                 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> >>> +                 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
> >>> +            freq-table-hz = <50000000 240000000>,
> >>> +                    <0 0>,
> >>> +                    <0 0>,
> >>> +                    <37500000 150000000>,
> >>> +                    <0 0>,
> >>> +                    <0 0>,
> >>> +                    <0 0>,
> >>> +                    <75000000 300000000>;
> >>> +
> >>> +            non-removable;
> >>> +            status = "disabled";
> >>> +        };
> >>> +
> >>> +        ufs_mem_phy: phy@4807000 {
> >>> +            compatible = "qcom,sm6115-qmp-ufs-phy";
> >> Krzysztof asked you to add a SoC-specific compatible in v1.
> > I'm working on adding a new compatible for sm6125's UFS PHY. Should I copy sm6115's tables or just reference them in the sm6125's config in drivers/phy/qualcomm/phy-qcom-qmp-ufs.c?
> If they're identical, you can just do something like this:
>
> compatible = "qcom,sm6125-qmp-ufs-phy", "qcom,sm6115-qmp-ufs-phy";

Ugh. I'd prefer to see either of the compatible strings here, but not
both of them.

>
> And ensure your newly added compatible is documented in bindings.
> This way, the driver will fall back to the 6115 compatible that's
> defined in .c, but if we ever need to adjust something specific
> for 6125, we will just use the define that we added here. That's
> important, as we're supposed to stay backwards-compatible with
> old device trees.
>
> Also, wrap your emails at around 80 chars or so, some people
> are grumpy about that :P
>
> Konrad
> >



-- 
With best wishes
Dmitry



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux