On 12/17/2022 8:59 AM, Konrad Dybcio wrote:
>
> On 17.12.2022 00:27, Melody Olvera wrote:
>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>> to boot to shell with console on these SoCs.
>>
>> Signed-off-by: Melody Olvera <quic_molvera@xxxxxxxxxxx>
>> ---
>> arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1334 +++++++++++++++++++++++++
>> arch/arm64/boot/dts/qcom/qru1000.dtsi | 26 +
>> 2 files changed, 1360 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> new file mode 100644
>> index 000000000000..244007a488a3
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>> @@ -0,0 +1,1334 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/clock/qcom,qdu1000-gcc.h>
>> +#include <dt-bindings/clock/qcom,rpmh.h>
>> +#include <dt-bindings/dma/qcom-gpi.h>
>> +#include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/power/qcom-rpmpd.h>
>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +
>> +/ {
>> + interrupt-parent = <&intc>;
>> +
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + chosen: chosen { };
>> +
>> + cpus {
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> +
>> + CPU0: cpu@0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a55";
>> + reg = <0x0 0x0>;
>> + enable-method = "psci";
>> + power-domain-names = "psci";
>> + power-domains = <&CPU_PD0>;
>> + qcom,freq-domains = <&cpufreq_hw 0>;
>> + next-level-cache = <&L2_0>;
>> + L2_0: l2-cache {
>> + compatible = "cache";
>> + next-level-cache = <&L3_0>;
>> + L3_0: l3-cache {
>> + compatible = "cache";
>> + };
>> + };
>> + };
>> +
>> + CPU1: cpu@100 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a55";
>> + reg = <0x0 0x100>;
>> + enable-method = "psci";
>> + power-domains = <&CPU_PD1>;
>> + power-domain-names = "psci";
>> + qcom,freq-domains = <&cpufreq_hw 0>;
>> + next-level-cache = <&L2_100>;
>> + L2_100: l2-cache {
>> + compatible = "cache";
>> + next-level-cache = <&L3_0>;
>> + };
>> + };
>> +
>> + CPU2: cpu@200 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a55";
>> + reg = <0x0 0x200>;
>> + enable-method = "psci";
>> + power-domains = <&CPU_PD2>;
>> + power-domain-names = "psci";
>> + qcom,freq-domains = <&cpufreq_hw 0>;
>> + next-level-cache = <&L2_200>;
>> + L2_200: l2-cache {
>> + compatible = "cache";
>> + next-level-cache = <&L3_0>;
>> + };
>> + };
>> +
>> + CPU3: cpu@300 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a55";
>> + reg = <0x0 0x300>;
>> + enable-method = "psci";
>> + power-domains = <&CPU_PD3>;
>> + power-domain-names = "psci";
>> + qcom,freq-domains = <&cpufreq_hw 0>;
>> + next-level-cache = <&L2_300>;
>> + L2_300: l2-cache {
>> + compatible = "cache";
>> + next-level-cache = <&L3_0>;
>> + };
>> + };
>> +
>> + cpu-map {
>> + cluster0 {
>> + core0 {
>> + cpu = <&CPU0>;
>> + };
>> +
>> + core1 {
>> + cpu = <&CPU1>;
>> + };
>> +
>> + core2 {
>> + cpu = <&CPU2>;
>> + };
>> +
>> + core3 {
>> + cpu = <&CPU3>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + idle-states {
>> + entry-method = "psci";
>> +
>> + CPU_OFF: cpu-sleep-0 {
>> + compatible = "arm,idle-state";
>> + entry-latency-us = <274>;
>> + exit-latency-us = <480>;
>> + min-residency-us = <3934>;
>> + arm,psci-suspend-param = <0x40000004>;
>> + local-timer-stop;
>> + };
>> + };
>> +
>> + domain-idle-states {
>> + CLUSTER_SLEEP_0: cluster-sleep-0 {
>> + compatible = "domain-idle-state";
>> + entry-latency-us = <584>;
>> + exit-latency-us = <2332>;
>> + min-residency-us = <6118>;
>> + arm,psci-suspend-param = <0x41000044>;
>> + };
>> +
>> + CLUSTER_SLEEP_1: cluster-sleep-1 {
>> + compatible = "domain-idle-state";
>> + entry-latency-us = <2893>;
>> + exit-latency-us = <4023>;
>> + min-residency-us = <9987>;
>> + arm,psci-suspend-param = <0x41003344>;
>> + };
>> + };
>> +
>> + firmware {
>> + scm {
>> + compatible = "qcom,scm-qdu1000", "qcom,scm";
>> + };
>> + };
>> +
>> + mc_virt: interconnect-0 {
>> + compatible = "qcom,qdu1000-mc-virt";
>> + #interconnect-cells = <2>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> +
>> + clk_virt: interconnect-1 {
>> + compatible = "qcom,qdu1000-clk-virt";
>> + #interconnect-cells = <2>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> +
>> + memory@80000000 {
>> + device_type = "memory";
>> + /* We expect the bootloader to fill in the size */
>> + reg = <0x0 0x80000000 0x0 0x0>;
> I'd appreciate others' input on this, but I think using 0x0 instead
> of just 0 for parts that are ireelevant to us (e.g. addresses and
> sizes below 4GiB) makes things more concise..
>
>
>> + };
>> +
>> + pmu {
>> + compatible = "arm,armv8-pmuv3";
>> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-1.0";
>> + method = "smc";
>> +
>> + CPU_PD0: power-domain-cpu0 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&CPU_OFF>;
>> + };
>> +
>> + CPU_PD1: power-domain-cpu1 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&CPU_OFF>;
>> + };
>> +
>> + CPU_PD2: power-domain-cpu2 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&CPU_OFF>;
>> + };
>> +
>> + CPU_PD3: power-domain-cpu3 {
>> + #power-domain-cells = <0>;
>> + power-domains = <&CLUSTER_PD>;
>> + domain-idle-states = <&CPU_OFF>;
>> + };
>> +
>> + CLUSTER_PD: power-domain-cluster {
>> + #power-domain-cells = <0>;
>> + domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
>> + };
>> + };
>> +
>> + reserved_memory: reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + hyp_mem: hyp@80000000 {
>> + reg = <0x0 0x80000000 0x0 0x600000>;
>> + no-map;
>> + };
>> +
>> + xbl_dt_log_mem: xbl-dt-log@80600000 {
>> + reg = <0x0 0x80600000 0x0 0x40000>;
>> + no-map;
>> + };
>> +
>> + xbl_ramdump_mem: xbl-ramdump@80640000 {
>> + reg = <0x0 0x80640000 0x0 0x1c0000>;
>> + no-map;
>> + };
>> +
>> + aop_image_mem: aop-image@80800000 {
>> + reg = <0x0 0x80800000 0x0 0x60000>;
>> + no-map;
>> + };
>> +
>> + aop_cmd_db_mem: aop-cmd-db@80860000 {
>> + compatible = "qcom,cmd-db";
>> + reg = <0x0 0x80860000 0x0 0x20000>;
>> + no-map;
>> + };
>> +
>> + aop_config_mem: aop-config@80880000 {
>> + reg = <0x0 0x80880000 0x0 0x20000>;
>> + no-map;
>> + };
>> +
>> + tme_crash_dump_mem: tme-crash-dump@808a0000 {
>> + reg = <0x0 0x808a0000 0x0 0x40000>;
>> + no-map;
>> + };
>> +
>> + tme_log_mem: tme-log@808e0000 {
>> + reg = <0x0 0x808e0000 0x0 0x4000>;
>> + no-map;
>> + };
>> +
>> + uefi_log_mem: uefi-log@808e4000 {
>> + reg = <0x0 0x808e4000 0x0 0x10000>;
>> + no-map;
>> + };
>> +
>> + /* secdata region can be reused by apps */
> I think these comments are irrelevant, as the regions referenced
> in them are simply not defined as reserved and they would matter
> more for XBL developers.
Fair enough; will remove.
>> +
>> + smem_mem: smem@80900000 {
>> + compatible = "qcom,smem";
>> + reg = <0x0 0x80900000 0x0 0x200000>;
>> + no-map;
>> + hwlocks = <&tcsr_mutex 3>;
>> + };
>> +
>> + cpucp_fw_mem: cpucp-fw@80b00000 {
>> + reg = <0x0 0x80b00000 0x0 0x100000>;
>> + no-map;
>> + };
>> +
>> + xbl_sc_mem: memory@80c00000 {
>> + reg = <0x0 0x80c00000 0x0 0x40000>;
>> + no-map;
>> + };
>> +
>> + /* uefi region can be reused by apps */
>> +
>> + tz_stat_mem: tz-stat@81d00000 {
>> + reg = <0x0 0x81d00000 0x0 0x100000>;
>> + no-map;
>> + };
>> +
>> + tags_mem: tags@81e00000 {
>> + reg = <0x0 0x81e00000 0x0 0x500000>;
>> + no-map;
>> + };
>> +
>> + qtee_mem: qtee@82300000 {
>> + reg = <0x0 0x82300000 0x0 0x500000>;
>> + no-map;
>> + };
>> +
>> + ta_mem: ta@82800000 {
>> + reg = <0x0 0x82800000 0x0 0xa00000>;
>> + no-map;
>> + };
>> +
>> + fs1_mem: fs1@83200000 {
>> + reg = <0x0 0x83200000 0x0 0x400000>;
>> + no-map;
>> + };
>> +
>> + fs2_mem: fs2@83600000 {
>> + reg = <0x0 0x83600000 0x0 0x400000>;
>> + no-map;
>> + };
>> +
>> + fs3_mem: fs3@83a00000 {
>> + reg = <0x0 0x83a00000 0x0 0x400000>;
>> + no-map;
>> + };
>> +
>> + /* Linux kernel image is loaded at 0x83e00000 */
>> +
>> + ipa_fw_mem: ipa-fw@8be00000 {
>> + reg = <0x0 0x8be00000 0x0 0x10000>;
>> + no-map;
>> + };
>> +
>> + ipa_gsi_mem: ipa-gsi@8be10000 {
>> + reg = <0x0 0x8be10000 0x0 0x14000>;
>> + no-map;
>> + };
>> +
>> + mpss_mem: mpss@8c000000 {
>> + reg = <0x0 0x8c000000 0x0 0x12c00000>;
>> + no-map;
>> + };
>> +
>> + q6_mpss_dtb_mem: q6-mpss-dtb@9ec00000 {
>> + reg = <0x0 0x9ec00000 0x0 0x80000>;
>> + no-map;
>> + };
>> +
>> + tenx_mem: tenx@a0000000 {
>> + reg = <0x0 0xa0000000 0x0 0x19600000>;
>> + no-map;
>> + };
>> +
>> + oem_tenx_mem: oem-tenx@b9600000 {
>> + reg = <0x0 0xb9600000 0x0 0x6a00000>;
>> + no-map;
>> + };
>> +
>> + tenx_q6_buffer_mem: tenx-q6-buffer@c0000000 {
>> + reg = <0x0 0xc0000000 0x0 0x3200000>;
>> + no-map;
>> + };
>> +
>> + ipa_buffer_mem: ipa-buffer@c3200000 {
>> + reg = <0x0 0xc3200000 0x0 0x12c00000>;
>> + no-map;
>> + };
>> + };
>> +
>> + soc: soc@0 {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges = <0 0 0 0 0x10 0>;
>> + dma-ranges = <0 0 0 0 0x10 0>;
>> + compatible = "simple-bus";
> The compatible should go fist.
Got it; must've missed this.
>
>> +
>> + gcc: clock-controller@80000 {
>> + compatible = "qcom,qdu1000-gcc";
>> + reg = <0x0 0x80000 0x0 0x1f4200>;
>> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, <0>, <0>, <0>;
> Please turn this into a vertical list:
>
> clocks = <a>,
> <b>,
>
> etc.
Sure thing.
>> + #clock-cells = <1>;
>> + #reset-cells = <1>;
>> + #power-domain-cells = <1>;
>> + };
>> +
>> + gpi_dma0: dma-controller@900000 {
>> + compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
>> + reg = <0x0 0x900000 0x0 0x60000>;
>> + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
>> + dma-channels = <12>;
>> + dma-channel-mask = <0x3f>;
>> + iommus = <&apps_smmu 0xf6 0x0>;
>> + #dma-cells = <3>;
>> + };
>> +
>> + qupv3_id_0: geniqup@9c0000 {
>> + compatible = "qcom,geni-se-qup";
>> + reg = <0x0 0x9c0000 0x0 0x2000>;
>> + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>> + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>> + clock-names = "m-ahb", "s-ahb";
>> + iommus = <&apps_smmu 0xe3 0x0>;
>> + interconnects = <&clk_virt MASTER_QUP_CORE_0 0
>> + &clk_virt SLAVE_QUP_CORE_0 0>;
>> + interconnect-names = "qup-core";
>> +
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> + status = "disabled";
>> +
>> + uart0: serial@980000 {
>> + compatible = "qcom,geni-uart";
>> + reg = <0x0 0x980000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> Please keep XYZ-names after XYZ.
Will do.
>
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_uart0_default>;
>> + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c1: i2c@984000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0x984000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>> + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c1_data_clk>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi1: spi@984000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0x984000 0x0 0x4000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
>> + status = "disabled";
>> + };
>> +
>> + i2c2: i2c@988000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0x988000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>> + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c2_data_clk>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi2: spi@988000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0x988000 0x0 0x4000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
>> + status = "disabled";
>> + };
>> +
>> + i2c3: i2c@98c000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0x98c000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>> + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c3_data_clk>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi3: spi@98c000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0x98c000 0x0 0x4000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
>> + status = "disabled";
>> + };
>> +
>> + i2c4: i2c@990000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0x990000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c4_data_clk>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi4: spi@990000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0x990000 0x0 0x4000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
>> + status = "disabled";
>> + };
>> +
>> + i2c5: i2c@994000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0x994000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>> + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c5_data_clk>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi5: spi@994000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0x994000 0x0 0x4000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
>> + status = "disabled";
>> + };
>> +
>> + i2c6: i2c@998000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0x998000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>> + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c6_data_clk>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi6: spi@998000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0x998000 0x0 0x4000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
>> + status = "disabled";
>> + };
>> +
>> + uart7: serial@99c000 {
>> + compatible = "qcom,geni-debug-uart";
>> + reg = <0x0 0x99c000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
>> + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + gpi_dma1: dma-controller@a00000 {
>> + compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
>> + reg = <0x0 0xa00000 0x0 0x60000>;
>> + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
>> + dma-channels = <12>;
>> + dma-channel-mask = <0x3f>;
>> + iommus = <&apps_smmu 0x116 0x0>;
>> + #dma-cells = <3>;
>> + };
>> +
>> + qupv3_id_1: geniqup@ac0000 {
>> + compatible = "qcom,geni-se-qup";
>> + reg = <0x0 0xac0000 0x0 0x2000>;
>> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
>> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
>> + clock-names = "m-ahb", "s-ahb";
>> + iommus = <&apps_smmu 0x103 0x0>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + ranges;
> Please remove the newline above `ranges;`.
Ok.
>
>
>> + status = "disabled";
>> +
>> + uart8: serial@a80000 {
>> + compatible = "qcom,geni-uart";
>> + reg = <0x0 0xa80000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_uart8_default>;
>> + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + i2c9: i2c@a84000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0xa84000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>> + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c9_data_clk>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi9: spi@a84000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0xa84000 0x0 0x4000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
>> + status = "disabled";
>> + };
>> +
>> + i2c10: i2c@a88000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0xa88000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>> + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c10_data_clk>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi10: spi@a88000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0xa88000 0x0 0x4000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
>> + status = "disabled";
>> + };
>> +
>> + i2c11: i2c@a8c000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0xa8c000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c11_data_clk>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi11: spi@a8c000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0xa8c000 0x0 0x4000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
>> + status = "disabled";
>> + };
>> +
>> + i2c12: i2c@a90000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0xa90000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>> + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c12_data_clk>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi12: spi@a90000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0xa90000 0x0 0x4000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
>> + status = "disabled";
>> + };
>> +
>> + i2c13: i2c@a94000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0xa94000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c13_data_clk>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + uart13: serial@a94000 {
>> + compatible = "qcom,geni-uart";
>> + reg = <0x0 0xa94000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_uart13_default>;
>> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi13: spi@a94000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0xa94000 0x0 0x4000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
>> + status = "disabled";
>> + };
>> +
>> + i2c14: i2c@a98000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0xa98000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>> + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_i2c14_data_clk>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi14: spi@a98000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0xa98000 0x0 0x4000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
>> + status = "disabled";
>> + };
>> +
>> + i2c15: i2c@a9c000 {
>> + compatible = "qcom,geni-i2c";
>> + reg = <0x0 0xa9c000 0x0 0x4000>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>> + interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>> + pinctrl-0 = <&qup_i2c15_data_clk>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + spi15: spi@a9c000 {
>> + compatible = "qcom,geni-spi";
>> + reg = <0x0 0xa9c000 0x0 0x4000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "se";
>> + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + system_noc: interconnect@1640000 {
>> + compatible = "qcom,qdu1000-system-noc";
>> + reg = <0x0 0x1640000 0x0 0x45080>;
>> + #interconnect-cells = <2>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
>> + };
>> +
>> + tcsr_mutex: hwlock@1f40000 {
>> + compatible = "qcom,tcsr-mutex";
>> + reg = <0x0 0x1f40000 0x0 0x20000>;
>> + #hwlock-cells = <1>;
>> + };
>> +
>> + pdc: interrupt-controller@b220000 {
>> + compatible = "qcom,qdu1000-pdc", "qcom,pdc";
>> + reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
>> + qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
>> + <94 609 31>, <125 63 1>;
>> + #interrupt-cells = <2>;
>> + interrupt-parent = <&intc>;
>> + interrupt-controller;
>> + };
>> +
>> + spmi_bus: spmi@c400000 {
>> + compatible = "qcom,spmi-pmic-arb";
>> + reg = <0x0 0xc400000 0x0 0x3000>,
>> + <0x0 0xc500000 0x0 0x400000>,
>> + <0x0 0xc440000 0x0 0x80000>,
>> + <0x0 0xc4c0000 0x0 0x10000>,
>> + <0x0 0xc42d000 0x0 0x4000>;
>> + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
>> + interrupt-names = "periph_irq";
>> + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
>> + qcom,ee = <0>;
>> + qcom,channel = <0>;
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> + interrupt-controller;
>> + #interrupt-cells = <4>;
>> + };
>> +
>> + tlmm: pinctrl@f000000 {
>> + compatible = "qcom,qdu1000-tlmm";
>> + reg = <0x0 0xf000000 0x0 0x1000000>;
>> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + gpio-ranges = <&tlmm 0 0 151>;
>> + wakeup-parent = <&pdc>;
>> +
>> + qup_uart0_default: qup-uart0-default-state {
>> + pins = "gpio6", "gpio7", "gpio8", "gpio9";
>> + function = "qup00";
>> + };
>> +
>> + qup_i2c1_data_clk: qup-i2c1-data-clk-state {
>> + pins = "gpio10", "gpio11";
>> + function = "qup01";
>> + };
>> +
>> + qup_spi1_data_clk: qup-spi1-data-clk-state {
>> + pins = "gpio10", "gpio11", "gpio12";
>> + function = "qup01";
>> + };
>> +
>> + qup_spi1_cs: qup-spi1-cs-state {
>> + pins = "gpio13";
>> + function = "gpio";
>> + };
>> +
>> + qup_i2c2_data_clk: qup-i2c2-data-clk-state {
>> + pins = "gpio12", "gpio13";
>> + function = "qup02";
>> + };
>> +
>> + qup_spi2_data_clk: qup-spi2-data-clk-state {
>> + pins = "gpio12", "gpio13", "gpio10";
>> + function = "qup02";
>> + };
>> +
>> + qup_spi2_cs: qup-spi2-cs-state {
>> + pins = "gpio11";
>> + function = "gpio";
>> + };
>> +
>> + qup_i2c3_data_clk: qup-i2c3-data-clk-state {
>> + pins = "gpio14", "gpio15";
>> + function = "qup03";
>> + };
>> +
>> + qup_spi3_data_clk: qup-spi3-data-clk-state {
>> + pins = "gpio14", "gpio15", "gpio16";
>> + function = "qup03";
>> + };
>> +
>> + qup_spi3_cs: qup-spi3-cs-state {
>> + pins = "gpio17";
>> + function = "gpio";
>> + };
>> +
>> + qup_i2c4_data_clk: qup-i2c4-data-clk-state {
>> + pins = "gpio16", "gpio17";
>> + function = "qup04";
>> + };
>> +
>> + qup_spi4_data_clk: qup-spi4-data-clk-state {
>> + pins = "gpio16", "gpio17", "gpio14";
>> + function = "qup04";
>> + };
>> +
>> + qup_spi4_cs: qup-spi4-cs-state {
>> + pins = "gpio15";
>> + function = "gpio";
>> + };
>> +
>> + qup_i2c5_data_clk: qup-i2c5-data-clk-state {
>> + pins = "gpio130", "gpio131";
>> + function = "qup05";
>> + };
>> +
>> + qup_spi5_data_clk: qup-spi5-data-clk-state {
>> + pins = "gpio130", "gpio131", "gpio132";
>> + function = "qup05";
>> + };
>> +
>> + qup_spi5_cs: qup-spi5-cs-state {
>> + pins = "gpio133";
>> + function = "gpio";
>> + };
>> +
>> + qup_i2c6_data_clk: qup-i2c6-data-clk-state {
>> + pins = "gpio132", "gpio133";
>> + function = "qup06";
>> + };
>> +
>> + qup_spi6_data_clk: qup-spi6-data-clk-state {
>> + pins = "gpio132", "gpio133", "gpio130";
>> + function = "qup06";
>> + };
>> +
>> + qup_spi6_cs: qup-spi6-cs-state {
>> + pins = "gpio131";
>> + function = "gpio";
>> + };
>> +
>> + qup_uart7_rx: qup-uart7-rx-state {
>> + pins = "gpio135";
>> + function = "qup07";
>> + };
>> +
>> + qup_uart7_tx: qup-uart7-tx-state {
>> + pins = "gpio134";
>> + function = "qup07";
>> + };
>> +
>> + qup_uart8_default: qup-uart8-default-state {
>> + pins = "gpio18", "gpio19", "gpio20", "gpio21";
>> + function = "qup10";
>> + };
>> +
>> + qup_i2c9_data_clk: qup-i2c9-data-clk-state {
>> + pins = "gpio22", "gpio23";
>> + function = "qup11";
>> + };
>> +
>> + qup_spi9_data_clk: qup-spi9-data-clk-state {
>> + pins = "gpio22", "gpio23", "gpio24";
>> + function = "qup11";
>> + };
>> +
>> + qup_spi9_cs: qup-spi9-cs-state {
>> + pins = "gpio25";
>> + function = "gpio";
>> + };
>> +
>> + qup_i2c10_data_clk: qup-i2c10-data-clk-state {
>> + pins = "gpio24", "gpio25";
>> + function = "qup12";
>> + };
>> +
>> + qup_spi10_data_clk: qup-spi10-data-clk-state {
>> + pins = "gpio24", "gpio25", "gpio22";
>> + function = "qup12";
>> + };
>> +
>> + qup_spi10_cs: qup-spi10-cs-state {
>> + pins = "gpio23";
>> + function = "gpio";
>> + };
>> +
>> + qup_i2c11_data_clk: qup-i2c11-data-clk-state {
>> + pins = "gpio26", "gpio27";
>> + function = "qup13";
>> + };
>> +
>> + qup_spi11_data_clk: qup-spi11-data-clk-state {
>> + pins = "gpio26", "gpio27", "gpio28";
>> + function = "qup13";
>> + };
>> +
>> + qup_spi11_cs: qup-spi11-cs-state {
>> + pins = "gpio29";
>> + function = "gpio";
>> + };
>> +
>> + qup_i2c12_data_clk: qup-i2c12-data-clk-state {
>> + pins = "gpio28", "gpio29";
>> + function = "qup14";
>> + };
>> +
>> + qup_spi12_data_clk: qup-spi12-data-clk-state {
>> + pins = "gpio28", "gpio29", "gpio26";
>> + function = "qup14";
>> + };
>> +
>> + qup_spi12_cs: qup-spi12-cs-state {
>> + pins = "gpio27";
>> + function = "gpio";
>> + };
>> +
>> + qup_i2c13_data_clk: qup-i2c13-data-clk-state {
>> + pins = "gpio30", "gpio31";
>> + function = "qup15";
>> + };
>> +
>> + qup_spi13_data_clk: qup-spi13-data-clk-state {
>> + pins = "gpio30", "gpio31", "gpio32";
>> + function = "qup15";
>> + };
>> +
>> + qup_spi13_cs: qup-spi13-cs-state {
>> + pins = "gpio33";
>> + function = "gpio";
>> + };
>> +
>> + qup_uart13_default: qup-uart13-default-state {
>> + pins = "gpio30", "gpio31", "gpio32", "gpio33";
>> + function = "qup15";
>> + };
>> +
>> + qup_i2c14_data_clk: qup-i2c14-data-clk-state {
>> + pins = "gpio34", "gpio35";
>> + function = "qup16";
>> + };
>> +
>> + qup_spi14_data_clk: qup-spi14-data-clk-state {
>> + pins = "gpio34", "gpio35", "gpio36";
>> + function = "qup16";
>> + };
>> +
>> + qup_spi14_cs: qup-spi14-cs-state {
>> + pins = "gpio37", "gpio38";
>> + function = "gpio";
>> + };
>> +
>> + qup_i2c15_data_clk: qup-i2c15-data-clk-state {
>> + pins = "gpio40", "gpio41";
>> + function = "qup17";
>> + };
>> +
>> + qup_spi15_data_clk: qup-spi15-data-clk-state {
>> + pins = "gpio40", "gpio41", "gpio30";
>> + function = "qup17";
>> + };
>> +
>> + qup_spi15_cs: qup-spi15-cs-state {
>> + pins = "gpio31";
>> + function = "gpio";
>> + };
>> + };
>> +
>> + apps_smmu: iommu@15000000 {
>> + compatible = "qcom,qdu1000-smmu-500", "arm,mmu-500";
>> + reg = <0x0 0x15000000 0x0 0x100000>;
>> + #iommu-cells = <2>;
>> + #global-interrupts = <2>;
>> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> There should be a space, not a tab after the = sign.
Sure.
>
>
>> + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> +
>> + intc: interrupt-controller@17200000 {
>> + compatible = "arm,gic-v3";
>> + reg = <0x0 0x17200000 0x0 0x10000>, /* GICD */
>> + <0x0 0x17260000 0x0 0x80000>; /* GICR * 4 */
>> + #interrupt-cells = <3>;
>> + interrupt-controller;
>> + #redistributor-regions = <1>;
>> + redistributor-stride = <0x0 0x20000>;
>> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> Please move interrupts below reg.
Ok.
>
>> + };
>> +
>> + timer@17420000 {
>> + compatible = "arm,armv7-timer-mem";
>> + reg = <0x0 0x17420000 0x0 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + frame@17421000 {
>> + reg = <0x17421000 0x1000>,
>> + <0x17422000 0x1000>;
>> + frame-number = <0>;
>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> Please move interrupts above frame-number.
Ok.
>
>> + };
>> +
>> + frame@17423000 {
>> + reg = <0x17423000 0x1000>;
>> + frame-number = <1>;
>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + frame@17425000 {
>> + reg = <0x17425000 0x1000>,
>> + <0x17426000 0x1000>;
>> + frame-number = <2>;
>> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + frame@17427000 {
>> + reg = <0x17427000 0x1000>;
>> + frame-number = <3>;
>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + frame@17429000 {
>> + reg = <0x17429000 0x1000>;
>> + frame-number = <4>;
>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + frame@1742b000 {
>> + reg = <0x1742b000 0x1000>;
>> + frame-number = <5>;
>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + frame@1742d000 {
>> + reg = <0x1742d000 0x1000>;
>> + frame-number = <6>;
>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> + };
>> +
>> + apps_rsc: rsc@17a00000 {
>> + compatible = "qcom,rpmh-rsc";
>> + reg = <0x0 0x17a00000 0x0 0x10000>,
>> + <0x0 0x17a10000 0x0 0x10000>,
>> + <0x0 0x17a20000 0x0 0x10000>;
>> + reg-names = "drv-0", "drv-1", "drv-2";
>> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>> + qcom,tcs-offset = <0xd00>;
>> + qcom,drv-id = <2>;
>> + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
>> + <WAKE_TCS 3>, <CONTROL_TCS 0>;
>> + label = "apps_rsc";
>> +
>> + apps_bcm_voter: bcm-voter {
>> + compatible = "qcom,bcm-voter";
>> + };
>> +
>> + rpmhcc: clock-controller {
>> + compatible = "qcom,qdu1000-rpmh-clk";
>> + #clock-cells = <1>;
>> + clock-names = "xo";
>> + clocks = <&xo_board>;
> Please keep XYZ-names after XYZ.
Ok.
>
>> + };
>> +
>> + rpmhpd: power-controller {
>> + compatible = "qcom,qdu1000-rpmhpd";
>> + #power-domain-cells = <1>;
>> + operating-points-v2 = <&rpmhpd_opp_table>;
>> +
>> + rpmhpd_opp_table: opp-table {
>> + compatible = "operating-points-v2";
>> +
>> + rpmhpd_opp_ret: opp1 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
>> + };
>> +
>> + rpmhpd_opp_min_svs: opp2 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>> + };
>> +
>> + rpmhpd_opp_low_svs: opp3 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>> + };
>> +
>> + rpmhpd_opp_svs: opp4 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>> + };
>> +
>> + rpmhpd_opp_svs_l1: opp5 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>> + };
>> +
>> + rpmhpd_opp_nom: opp6 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>> + };
>> +
>> + rpmhpd_opp_nom_l1: opp7 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>> + };
>> +
>> + rpmhpd_opp_nom_l2: opp8 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
>> + };
>> +
>> + rpmhpd_opp_turbo: opp9 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
>> + };
>> +
>> + rpmhpd_opp_turbo_l1: opp10 {
>> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + cpufreq_hw: cpufreq@17d90000 {
>> + compatible = "qcom,qdu1000-cpufreq-epss", "qcom,cpufreq-epss";
>> + reg = <0x0 0x17d90000 0x0 0x1000>, <0x0 0x17d91000 0x0 0x1000>;
>> + reg-names = "freq-domain0", "freq-domain1";
>> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
>> + clock-names = "xo", "alternate";
>> + #freq-domain-cells = <1>;
>> + };
>> +
>> + gem_noc: interconnect@19100000 {
>> + compatible = "qcom,qdu1000-gem-noc";
>> + reg = <0x0 0x19100000 0x0 0xB8080>;
>> + #interconnect-cells = <2>;
>> + qcom,bcm-voters = <&apps_bcm_voter>;
> It would be nice to keep #interconnect-cells last.
Sure.
>
>> + };
>> + };
>> +
>> + arch_timer: timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>> + clock-frequency = <19200000>;
> Please remove this property, unless this platform is super
> special and doesn't boot without it (otherwise CNTRFRQ_ELn
> is almost surely initialized somewhere earlier in the boot
> chain.
Sure thing.
Thanks,
Melody
>
>
> Konrad
>> + };
>> +};
>> diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>> new file mode 100644
>> index 000000000000..eac5dc54a8ab
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
>> @@ -0,0 +1,26 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include "qdu1000.dtsi"
>> +/delete-node/ &tenx_mem;
>> +/delete-node/ &oem_tenx_mem;
>> +/delete-node/ &tenx_q6_buffer_mem;
>> +
>> +&reserved_memory {
>> + oem_tenx_mem: oem-tenx@a0000000 {
>> + reg = <0x0 0xa0000000 0x0 0x6400000>;
>> + no-map;
>> + };
>> +
>> + mpss_diag_buffer_mem: mpss-diag-buffer@aea00000 {
>> + reg = <0x0 0xaea00000 0x0 0x6400000>;
>> + no-map;
>> + };
>> +
>> + tenx_q6_buffer_mem: tenx-q6-buffer@b4e00000 {
>> + reg = <0x0 0xb4e00000 0x0 0x3200000>;
>> + no-map;
>> + };
>> +};
