On 16/12/22 8:06 pm, Sjoerd Simons wrote:
> From: Nitin Yadav <n-yadav@xxxxxx>
>
> UHS Class U1 sd-card are not getting detected due to incorrect
> OTAP/ITAP delay select values in linux. Update OTAP and ITAP
> delay select values for various speed modes. For sdhci0, update
> OTAP delay values for ddr52 & HS200 and add ITAP delay for legacy
> & mmc-hs. For sdhci1 & sdhci2, update OTAP & ITAP delay select
> recommended as in RIOT for various speed modes.
>
> Signed-off-by: Nitin Yadav <n-yadav@xxxxxx>
> [cherry-pick from vendor BSP]
> Signed-off-by: Sjoerd Simons <sjoerd@xxxxxxxxxxxxx>
> ---
>
> arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 46 ++++++++++++------------
> 1 file changed, 24 insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> index 03660476364f..28c250a8d1ec 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> @@ -391,8 +391,10 @@ sdhci0: mmc@fa10000 {
> ti,clkbuf-sel = <0x7>;
> ti,otap-del-sel-legacy = <0x0>;
> ti,otap-del-sel-mmc-hs = <0x0>;
> - ti,otap-del-sel-ddr52 = <0x9>;
> - ti,otap-del-sel-hs200 = <0x6>;
> + ti,otap-del-sel-ddr52 = <0x5>;
> + ti,otap-del-sel-hs200 = <0x5>;
> + ti,itap-del-sel-legacy = <0xa>;
This is pretty useless without corresponding driver changes
to pick up ti,itap-del-sel-legacy as well
https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/drivers/mmc/host/sdhci_am654.c?h=ti-linux-5.10.y&id=93d22fc56007ee13e589debf0d32c8b1d5fdc6d8
https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/drivers/mmc/host/sdhci_am654.c?h=ti-linux-5.10.y&id=9c878c3dc642f7f1f3ab6ca7f812cd43fe7ed7d8
Could you list that cards affected and fixed by this change?
Regards
Vignesh
[...]
