[PATCH v3 0/2] Add support for the orisetech ota5601

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Changes since v2:
 - Documented the registers to the best of my knowledge
 - Used macros for on/off panel registers
 - Added SPI id_table (non-requested change, fixes a warning in dmesg)

---
Changes since v1:
 - fixed the dt-bindings maintainer email adress
 - dropped backlight, port, power-supply and reset-gpios as they're
   provided by panel-common.yaml as pointed by Krzysztof Kozlowski
 - changed reg: true to reg : maxItems: 1

Christophe Branchereau (2):
  drm/panel: add the orisetech ota5601a
  dt-bindings: display/panel: Add the Focaltech gpt3

 .../display/panel/focaltech,gpt3.yaml         |  56 +++
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-orisetech-ota5601a.c  | 364 ++++++++++++++++++
 4 files changed, 430 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-orisetech-ota5601a.c

-- 
2.35.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux